[Intel-gfx] Fwd: something wrong with the latest kernel
zhuhuachun
zhuhuachun at sinap.ac.cn
Fri Mar 20 16:18:18 PDT 2015
-------- Forwarded Message --------
Subject: something wrong with the latest kernel
Date: Fri, 20 Mar 2015 10:26:15 +0800
From: zhuhuachun <zhuhuachun at sinap.ac.cn>
To: jani.nikula at intel.com
hi
there is something wrong with the latest kernel (4.0.0).
more details please look at the attachment.
there is no the problem with the kernel-3.19.
the information of my computer are:
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller
(rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset
Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation 4 Series Chipset
Integrated Graphics Controller (rev 03)
00:03.0 Communication controller: Intel Corporation 4 Series Chipset
HECI Controller (rev 03)
00:03.2 IDE interface: Intel Corporation 4 Series Chipset PT IDER
Controller (rev 03)
00:03.3 Serial controller: Intel Corporation 4 Series Chipset Serial KT
Controller (rev 03)
00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network
Connection (rev 02)
00:1a.0 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #5 (rev 02)
00:1a.2 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #6 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD
Audio Controller (rev 02)
00:1d.0 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB
UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2
EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a2)
00:1f.0 ISA bridge: Intel Corporation 82801JDO (ICH10DO) LPC Interface
Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family)
4-port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801JD/DO (ICH10 Family) SMBus
Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family)
2-port SATA IDE Controller (rev 02)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20150321/954e9746/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot from 2015-03-20 09-54-41_mod.png
Type: image/png
Size: 199982 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20150321/954e9746/attachment-0001.png>
-------------- next part --------------
[ 0.000000] CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-0.rc4.git0.1.fc22.x86_64 (mockbuild at bkernel01.phx2.fedoraproject.org) (gcc version 5.0.0 20150226 (Red Hat 5.0.0-0.17) (GCC) ) #1 SMP Mon Mar 16 14:36:23 UTC 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-0.rc4.git0.1.fc22.x86_64 root=UUID=323eb53f-05f6-4651-be2c-8643bcefd89d ro module.sig_enforce=0 console.font=latarcyrheb-sun16 LANG=en_US.UTF-8
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff97fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cff98000-0x00000000cffbbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffbc000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000018effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000018f000000-0x000000018fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: LENOVO ThinkCentre M Q45T/LENOVO, BIOS 5CKT54AUS 09/07/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x18f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f6b20-0x000f6b2f] mapped at [ffff8800000f6b20]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0201d000, 0x0201dfff] PGTABLE
[ 0.000000] BRK [0x0201e000, 0x0201efff] PGTABLE
[ 0.000000] BRK [0x0201f000, 0x0201ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x18ee00000-0x18effffff]
[ 0.000000] [mem 0x18ee00000-0x18effffff] page 2M
[ 0.000000] BRK [0x02020000, 0x02020fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x18edfffff]
[ 0.000000] [mem 0x180000000-0x18edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x160000000-0x17fffffff]
[ 0.000000] [mem 0x160000000-0x17fffffff] page 2M
[ 0.000000] BRK [0x02021000, 0x02021fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff7ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcff7ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x15fffffff]
[ 0.000000] [mem 0x100000000-0x15fffffff] page 2M
[ 0.000000] BRK [0x02022000, 0x02022fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35e00000-0x36ef7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F68F0 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000CFF8A898 0000B4 (v01 LENOVO TC-5C 00000136 LTP 00000000)
[ 0.000000] ACPI: TCPA 0x00000000CFF97B9D 000032 (v02 LENOVO TC-5C 00000136 PTL 00000000)
[ 0.000000] ACPI: FACP 0x00000000CFF97BCF 0000F4 (v03 LENOVO TC-5C 00000136 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x00000000CFF8E446 0096D3 (v01 LENOVO TC-5C 00000136 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x00000000CFFBBFC0 000040
[ 0.000000] ACPI: _MAR 0x00000000CFF97CC3 000030 (v01 LENOVO TC-5C 00000136 LOHR 00000001)
[ 0.000000] ACPI: SLIC 0x00000000CFF97CF3 000176 (v01 LENOVO TC-5C 00000136 LTP 00000000)
[ 0.000000] ACPI: MCFG 0x00000000CFF97E69 00003C (v01 LENOVO TC-5C 00000136 LTP 00000000)
[ 0.000000] ACPI: HPET 0x00000000CFF97EA5 000038 (v01 LENOVO TC-5C 00000136 LTP 00000001)
[ 0.000000] ACPI: APIC 0x00000000CFF97EDD 000084 (v01 LENOVO TC-5C 00000136 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000CFF97F61 000028 (v01 LENOVO TC-5C 00000136 LTP 00000001)
[ 0.000000] ACPI: ASF! 0x00000000CFF97F89 000077 (v32 LENOVO TC-5C 00000136 PTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CFF8C198 00025F (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8C0F2 0000A6 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8C04C 0000A6 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8BFA6 0000A6 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8BF00 0000A6 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8BE5A 0000A6 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8BDB4 0000A6 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8BD0E 0000A6 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: SSDT 0x00000000CFF8A94C 0013C2 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000018effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x18efe8000-0x18effbfff]
[ 0.000000] [ffffea0000000000-ffffea00063fffff] PMD -> [ffff880188e00000-ffff88018e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000018effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cff7ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000018effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000018effffff]
[ 0.000000] On node 0 totalpages: 1437469
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13246 pages used for memmap
[ 0.000000] DMA32 zone: 847744 pages, LIFO batch:31
[ 0.000000] Normal zone: 9152 pages used for memmap
[ 0.000000] Normal zone: 585728 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xd8000000-0xdfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff80000-0xcff97fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcff98000-0xcffbbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffbc000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88018ec00000 s91608 r8192 d31272 u524288
[ 0.000000] pcpu-alloc: s91608 r8192 d31272 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1414986
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-0.rc4.git0.1.fc22.x86_64 root=UUID=323eb53f-05f6-4651-be2c-8643bcefd89d ro module.sig_enforce=0 console.font=latarcyrheb-sun16 LANG=en_US.UTF-8
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
[ 0.000000] Memory: 5558864K/5749876K available (7730K kernel code, 1149K rwdata, 3336K rodata, 1496K init, 1524K bss, 191012K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:65792 nr_irqs:456 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2826.218 MHz processor
[ 0.001010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5652.43 BogoMIPS (lpj=2826218)
[ 0.001130] pid_max: default: 32768 minimum: 301
[ 0.001195] ACPI: Core revision 20150204
[ 0.006807] ACPI: All ACPI Tables successfully acquired
[ 0.007030] Security Framework initialized
[ 0.007094] SELinux: Initializing.
[ 0.007155] SELinux: Starting in permissive mode
[ 0.007157] Yama: becoming mindful.
[ 0.008388] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.012793] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015091] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.015168] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.015638] Initializing cgroup subsys blkio
[ 0.015698] Initializing cgroup subsys memory
[ 0.015764] Initializing cgroup subsys devices
[ 0.015822] Initializing cgroup subsys freezer
[ 0.015881] Initializing cgroup subsys net_cls
[ 0.015939] Initializing cgroup subsys perf_event
[ 0.016006] Initializing cgroup subsys net_prio
[ 0.016065] Initializing cgroup subsys hugetlb
[ 0.016145] CPU: Physical Processor ID: 0
[ 0.016202] CPU: Processor Core ID: 0
[ 0.016258] mce: CPU supports 6 MCE banks
[ 0.016318] CPU0: Thermal monitoring handled by SMI
[ 0.016324] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.016383] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.016525] Freeing SMP alternatives memory: 28K (ffffffff81e97000 - ffffffff81e9e000)
[ 0.017656] ftrace: allocating 27776 entries in 109 pages
[ 0.025158] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.036000] APIC calibration not consistent with PM-Timer: 360ms instead of 100ms
[ 0.036000] APIC delta adjusted to PM-Timer: 2078106 (7501890)
[ 0.036000] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz (fam: 06, model: 17, stepping: 0a)
[ 0.036000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.036000] ... version: 2
[ 0.036000] ... bit width: 40
[ 0.036000] ... generic registers: 2
[ 0.036000] ... value mask: 000000ffffffffff
[ 0.036000] ... max period: 000000007fffffff
[ 0.036000] ... fixed-purpose events: 3
[ 0.036000] ... event mask: 0000000700000003
[ 0.037303] x86: Booting SMP configuration:
[ 0.037361] .... node #0, CPUs: #1
[ 0.037207] CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.037207] CPU1: Thermal monitoring handled by SMI
[ 0.050083] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.050412] #2
[ 0.050308] CPU2 microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.050308] CPU2: Thermal monitoring handled by SMI
[ 0.068039] #3
[ 0.067010] CPU3 microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.067010] CPU3: Thermal monitoring handled by SMI
[ 0.085010] x86: Booted up 1 node, 4 CPUs
[ 0.085178] smpboot: Total of 4 processors activated (22609.74 BogoMIPS)
[ 0.087004] devtmpfs: initialized
[ 0.090131] PM: Registering ACPI NVS region [mem 0xcff98000-0xcffbbfff] (147456 bytes)
[ 0.090280] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.090280] pinctrl core: initialized pinctrl subsystem
[ 0.090280] RTC time: 1:40:45, date: 03/20/15
[ 0.090381] NET: Registered protocol family 16
[ 0.094006] cpuidle: using governor menu
[ 0.094134] ACPI: bus type PCI registered
[ 0.094202] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.094335] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xf8000000-0xf90fffff] (base 0xf8000000)
[ 0.094433] PCI: MMCONFIG at [mem 0xf8000000-0xf90fffff] reserved in E820
[ 0.094523] PCI: Using configuration type 1 for base access
[ 0.099075] ACPI: Added _OSI(Module Device)
[ 0.099131] ACPI: Added _OSI(Processor Device)
[ 0.099187] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.099244] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.103034] ACPI: Dynamic OEM Table Load:
[ 0.103132] ACPI: SSDT 0xFFFF88018746BE00 0001DD (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.103582] ACPI: Dynamic OEM Table Load:
[ 0.103679] ACPI: SSDT 0xFFFF880187432800 00067D (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.104238] ACPI: Dynamic OEM Table Load:
[ 0.104333] ACPI: SSDT 0xFFFF8801874B4000 00016E (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.104732] ACPI: Dynamic OEM Table Load:
[ 0.104827] ACPI: SSDT 0xFFFF880187468A80 000085 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.105325] ACPI: Dynamic OEM Table Load:
[ 0.105421] ACPI: SSDT 0xFFFF8801874B4200 00016E (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.105816] ACPI: Dynamic OEM Table Load:
[ 0.105922] ACPI: SSDT 0xFFFF880187468B40 000085 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.106404] ACPI: Dynamic OEM Table Load:
[ 0.106500] ACPI: SSDT 0xFFFF8801874B4400 00016E (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.106896] ACPI: Dynamic OEM Table Load:
[ 0.107002] ACPI: SSDT 0xFFFF880187468C00 000085 (v01 LENOVO TC-5C 00000136 INTL 20050228)
[ 0.107456] ACPI: Interpreter enabled
[ 0.107515] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.107648] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.107787] ACPI: (supports S0 S3 S4 S5)
[ 0.107849] ACPI: Using IOAPIC for interrupt routing
[ 0.107928] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.113459] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.113523] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.113656] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20150204/dsfield-211)
[ 0.113817] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801888ad0a0), AE_ALREADY_EXISTS (20150204/psparse-536)
[ 0.113994] acpi PNP0A03:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[ 0.114379] acpi PNP0A03:00: host bridge window expanded to [mem 0xe0000000-0xfffffffe window]; [mem 0xfed40000-0xfed4ffff window] ignored
[ 0.114482] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-10] only partially covers this bridge
[ 0.114768] PCI host bridge to bus 0000:00
[ 0.114825] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.114884] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.115002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.115105] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.115197] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.115289] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.115381] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.115473] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfffffffe window]
[ 0.115565] pci_bus 0000:00: root bus resource [io 0x0d00-0xfdff window]
[ 0.115632] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
[ 0.115651] DMAR: Forcing write-buffer flush capability
[ 0.115708] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.115847] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
[ 0.115856] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfc3fffff 64bit]
[ 0.115862] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.115867] pci 0000:00:02.0: reg 0x20: [io 0x1c70-0x1c77]
[ 0.115952] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
[ 0.115960] pci 0000:00:02.1: reg 0x10: [mem 0xfc400000-0xfc4fffff 64bit]
[ 0.116082] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
[ 0.116103] pci 0000:00:03.0: reg 0x10: [mem 0xfc524000-0xfc52400f 64bit]
[ 0.116148] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.116229] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
[ 0.116243] pci 0000:00:03.2: reg 0x10: [io 0x1c88-0x1c8f]
[ 0.116248] pci 0000:00:03.2: reg 0x14: [io 0x1c7c-0x1c7f]
[ 0.116255] pci 0000:00:03.2: reg 0x18: [io 0x1c80-0x1c87]
[ 0.116261] pci 0000:00:03.2: reg 0x1c: [io 0x1c78-0x1c7b]
[ 0.116266] pci 0000:00:03.2: reg 0x20: [io 0x1c20-0x1c2f]
[ 0.116370] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
[ 0.116392] pci 0000:00:03.3: reg 0x10: [io 0x1c90-0x1c97]
[ 0.116403] pci 0000:00:03.3: reg 0x14: [mem 0xfc526000-0xfc526fff]
[ 0.116604] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
[ 0.116625] pci 0000:00:19.0: reg 0x10: [mem 0xfc500000-0xfc51ffff]
[ 0.116634] pci 0000:00:19.0: reg 0x14: [mem 0xfc527000-0xfc527fff]
[ 0.116644] pci 0000:00:19.0: reg 0x18: [io 0x1820-0x183f]
[ 0.116717] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.116763] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.116877] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
[ 0.116923] pci 0000:00:1a.0: reg 0x20: [io 0x1840-0x185f]
[ 0.117020] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.117132] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
[ 0.117178] pci 0000:00:1a.1: reg 0x20: [io 0x1860-0x187f]
[ 0.117270] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.117372] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
[ 0.117418] pci 0000:00:1a.2: reg 0x20: [io 0x1880-0x189f]
[ 0.117510] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.117622] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
[ 0.117643] pci 0000:00:1a.7: reg 0x10: [mem 0xfc528000-0xfc5283ff]
[ 0.117733] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.117788] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.117894] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300
[ 0.117913] pci 0000:00:1b.0: reg 0x10: [mem 0xfc520000-0xfc523fff 64bit]
[ 0.118005] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.118094] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
[ 0.118139] pci 0000:00:1d.0: reg 0x20: [io 0x18a0-0x18bf]
[ 0.118231] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.118333] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
[ 0.118379] pci 0000:00:1d.1: reg 0x20: [io 0x18c0-0x18df]
[ 0.118473] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.118574] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
[ 0.118620] pci 0000:00:1d.2: reg 0x20: [io 0x18e0-0x18ff]
[ 0.118711] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.118835] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
[ 0.118856] pci 0000:00:1d.7: reg 0x10: [mem 0xfc529000-0xfc5293ff]
[ 0.118946] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.118992] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.119045] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.119144] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.119245] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
[ 0.119418] pci 0000:00:1f.2: [8086:3a00] type 00 class 0x01018f
[ 0.119437] pci 0000:00:1f.2: reg 0x10: [io 0x1ca8-0x1caf]
[ 0.119447] pci 0000:00:1f.2: reg 0x14: [io 0x1c9c-0x1c9f]
[ 0.119456] pci 0000:00:1f.2: reg 0x18: [io 0x1ca0-0x1ca7]
[ 0.119466] pci 0000:00:1f.2: reg 0x1c: [io 0x1c98-0x1c9b]
[ 0.119475] pci 0000:00:1f.2: reg 0x20: [io 0x1c40-0x1c4f]
[ 0.119484] pci 0000:00:1f.2: reg 0x24: [io 0x1c30-0x1c3f]
[ 0.119600] pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
[ 0.119618] pci 0000:00:1f.3: reg 0x10: [mem 0xfc52a000-0xfc52a0ff 64bit]
[ 0.119642] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.119741] pci 0000:00:1f.5: [8086:3a06] type 00 class 0x010185
[ 0.119759] pci 0000:00:1f.5: reg 0x10: [io 0x1cc0-0x1cc7]
[ 0.119769] pci 0000:00:1f.5: reg 0x14: [io 0x1cb4-0x1cb7]
[ 0.119779] pci 0000:00:1f.5: reg 0x18: [io 0x1cb8-0x1cbf]
[ 0.119788] pci 0000:00:1f.5: reg 0x1c: [io 0x1cb0-0x1cb3]
[ 0.119797] pci 0000:00:1f.5: reg 0x20: [io 0x1c60-0x1c6f]
[ 0.119806] pci 0000:00:1f.5: reg 0x24: [io 0x1c50-0x1c5f]
[ 0.120065] pci 0000:00:1e.0: PCI bridge to [bus 11] (subtractive decode)
[ 0.120136] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.120138] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.120140] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.120142] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.120144] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.120146] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.120148] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfffffffe window] (subtractive decode)
[ 0.120150] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff window] (subtractive decode)
[ 0.120428] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.120748] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.121045] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.121363] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.121683] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.122112] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.122501] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.122901] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.123289] platform INT0800:00: failed to claim resource 0
[ 0.123349] acpi INT0800:00: platform device creation failed: -16
[ 0.123968] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.124082] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.124082] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.124168] vgaarb: loaded
[ 0.124221] vgaarb: bridge control possible 0000:00:02.0
[ 0.124341] SCSI subsystem initialized
[ 0.124414] libata version 3.00 loaded.
[ 0.124414] ACPI: bus type USB registered
[ 0.124414] usbcore: registered new interface driver usbfs
[ 0.124414] usbcore: registered new interface driver hub
[ 0.124414] usbcore: registered new device driver usb
[ 0.125047] PCI: Using ACPI for IRQ routing
[ 0.125602] PCI: pci_cache_line_size set to 64 bytes
[ 0.125662] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.125723] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.125724] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
[ 0.125726] e820: reserve RAM buffer [mem 0x18f000000-0x18fffffff]
[ 0.126020] NetLabel: Initializing
[ 0.126075] NetLabel: domain hash size = 128
[ 0.126130] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.126199] NetLabel: unlabeled traffic allowed by default
[ 0.126305] HPET: 8 timers in total, 4 timers will be used for per-cpu timer
[ 0.126374] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0
[ 0.126599] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.128028] hpet: hpet2 irq 24 for MSI
[ 0.128040] hpet: hpet3 irq 25 for MSI
[ 0.128040] hpet: hpet4 irq 26 for MSI
[ 0.128040] hpet: hpet5 irq 27 for MSI
[ 0.128043] Switched to clocksource hpet
[ 0.135552] pnp: PnP ACPI init
[ 0.135842] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.135904] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.135964] system 00:00: [io 0x1000-0x107f] could not be reserved
[ 0.136037] system 00:00: [io 0x1180-0x11bf] has been reserved
[ 0.136097] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.136158] system 00:00: [io 0xfe00] has been reserved
[ 0.136218] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.136280] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.136342] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.136404] system 00:00: [mem 0xfed12000-0xfed12fff] has been reserved
[ 0.136465] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.136527] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.136589] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.136651] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.136712] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.136774] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.136834] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.136896] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.136951] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.137234] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.137544] pnp 00:03: [dma 2]
[ 0.137577] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.137757] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.137964] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.138050] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.138089] pnp 00:07: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active)
[ 0.138121] pnp: PnP ACPI: found 8 devices
[ 0.147830] pci 0000:00:1e.0: PCI bridge to [bus 11]
[ 0.147902] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.147904] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff window]
[ 0.147906] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff window]
[ 0.147908] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.147910] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.147911] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
[ 0.147913] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfffffffe window]
[ 0.147915] pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff window]
[ 0.147917] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7 window]
[ 0.147919] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff window]
[ 0.147921] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff window]
[ 0.147923] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.147925] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.147927] pci_bus 0000:11: resource 9 [mem 0x000dc000-0x000dffff window]
[ 0.147928] pci_bus 0000:11: resource 10 [mem 0xe0000000-0xfffffffe window]
[ 0.147930] pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff window]
[ 0.147964] NET: Registered protocol family 2
[ 0.148240] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.148629] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.149160] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.149275] TCP: reno registered
[ 0.149341] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.418237] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.418398] NET: Registered protocol family 1
[ 0.418468] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.419349] PCI: CLS 32 bytes, default 64
[ 0.419406] Unpacking initramfs...
[ 0.692603] Freeing initrd memory: 17376K (ffff880035e00000 - ffff880036ef8000)
[ 0.692716] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.692777] software IO TLB [mem 0xcbf80000-0xcff80000] (64MB) mapped at [ffff8800cbf80000-ffff8800cff7ffff]
[ 0.692921] Simple Boot Flag at 0x36 set to 0x1
[ 0.693288] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa0b
[ 0.693372] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa0b
[ 0.693442] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa0b
[ 0.693509] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa0b
[ 0.693685] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 0.695414] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.695506] Initialise system trusted keyring
[ 0.695584] audit: initializing netlink subsys (disabled)
[ 0.695673] audit: type=2000 audit(1426815645.694:1): initialized
[ 0.696072] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.697908] zpool: loaded
[ 0.697962] zbud: loaded
[ 0.698242] VFS: Disk quotas dquot_6.5.2
[ 0.698341] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.698862] Key type big_key registered
[ 0.698919] SELinux: Registering netfilter hooks
[ 0.700726] alg: No test for stdrng (krng)
[ 0.700796] NET: Registered protocol family 38
[ 0.700858] Key type asymmetric registered
[ 0.700916] Asymmetric key parser 'x509' registered
[ 0.701033] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.701242] io scheduler noop registered
[ 0.701306] io scheduler deadline registered
[ 0.701398] io scheduler cfq registered (default)
[ 0.701558] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.701633] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.701722] intel_idle: does not run on family 6 model 23
[ 0.701816] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
[ 0.701915] ACPI: Power Button [PWRB]
[ 0.702028] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.702120] ACPI: Power Button [PWRF]
[ 0.703029] Monitor-Mwait will be used to enter C-1 state
[ 0.703033] Monitor-Mwait will be used to enter C-2 state
[ 0.703037] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.703099] ACPI: acpi_idle registered with cpuidle
[ 0.703965] GHES: HEST is not enabled!
[ 0.704188] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.724947] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.745841] 0000:00:03.3: ttyS1 at I/O 0x1c90 (irq = 17, base_baud = 115200) is a 16550A
[ 0.746366] Non-volatile memory driver v1.3
[ 0.746481] Linux agpgart interface v0.103
[ 0.746608] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[ 0.746680] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.748800] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 0.749101] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.749337] ata_piix 0000:00:1f.2: version 2.13
[ 0.749455] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.900044] ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
[ 0.900976] scsi host0: ata_piix
[ 0.901251] scsi host1: ata_piix
[ 0.901360] ata1: SATA max UDMA/133 cmd 0x1ca8 ctl 0x1c9c bmdma 0x1c40 irq 17
[ 0.901422] ata2: SATA max UDMA/133 cmd 0x1ca0 ctl 0x1c98 bmdma 0x1c48 irq 17
[ 0.901600] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.052064] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 1.052793] scsi host2: ata_piix
[ 1.052961] scsi host3: ata_piix
[ 1.053077] ata3: SATA max UDMA/133 cmd 0x1cc0 ctl 0x1cb4 bmdma 0x1c60 irq 18
[ 1.053144] ata4: SATA max UDMA/133 cmd 0x1cb8 ctl 0x1cb0 bmdma 0x1c68 irq 18
[ 1.053265] libphy: Fixed MDIO Bus: probed
[ 1.053392] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.053507] ehci-pci: EHCI PCI platform driver
[ 1.053663] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.053790] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.053904] ehci-pci 0000:00:1a.7: debug port 1
[ 1.057857] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 1.057861] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfc528000
[ 1.059024] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.059123] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.059190] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.059291] usb usb1: Product: EHCI Host Controller
[ 1.059354] usb usb1: Manufacturer: Linux 4.0.0-0.rc4.git0.1.fc22.x86_64 ehci_hcd
[ 1.059455] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.059637] hub 1-0:1.0: USB hub found
[ 1.059703] hub 1-0:1.0: 6 ports detected
[ 1.059935] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.060078] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.060190] ehci-pci 0000:00:1d.7: debug port 1
[ 1.064145] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.064159] ehci-pci 0000:00:1d.7: irq 16, io mem 0xfc529000
[ 1.070025] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.070117] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.070183] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.070284] usb usb2: Product: EHCI Host Controller
[ 1.070346] usb usb2: Manufacturer: Linux 4.0.0-0.rc4.git0.1.fc22.x86_64 ehci_hcd
[ 1.070447] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.070605] hub 2-0:1.0: USB hub found
[ 1.070670] hub 2-0:1.0: 6 ports detected
[ 1.070870] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.070937] ohci-pci: OHCI PCI platform driver
[ 1.071019] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.071109] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.071203] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.071310] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.071389] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840
[ 1.071491] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.071557] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.071657] usb usb3: Product: UHCI Host Controller
[ 1.071719] usb usb3: Manufacturer: Linux 4.0.0-0.rc4.git0.1.fc22.x86_64 uhci_hcd
[ 1.071820] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.071976] hub 3-0:1.0: USB hub found
[ 1.072051] hub 3-0:1.0: 2 ports detected
[ 1.072206] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.072304] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.072409] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.072488] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001860
[ 1.072588] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.072653] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.072755] usb usb4: Product: UHCI Host Controller
[ 1.072818] usb usb4: Manufacturer: Linux 4.0.0-0.rc4.git0.1.fc22.x86_64 uhci_hcd
[ 1.072919] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.073079] hub 4-0:1.0: USB hub found
[ 1.073145] hub 4-0:1.0: 2 ports detected
[ 1.073301] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.073397] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.073502] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.073582] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001880
[ 1.073683] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.073750] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.073850] usb usb5: Product: UHCI Host Controller
[ 1.073913] usb usb5: Manufacturer: Linux 4.0.0-0.rc4.git0.1.fc22.x86_64 uhci_hcd
[ 1.074023] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.074173] hub 5-0:1.0: USB hub found
[ 1.074238] hub 5-0:1.0: 2 ports detected
[ 1.074393] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.074488] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.074593] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.074674] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
[ 1.074786] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.074922] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.075026] usb usb6: Product: UHCI Host Controller
[ 1.075083] usb usb6: Manufacturer: Linux 4.0.0-0.rc4.git0.1.fc22.x86_64 uhci_hcd
[ 1.075175] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.075354] hub 6-0:1.0: USB hub found
[ 1.075414] hub 6-0:1.0: 2 ports detected
[ 1.075564] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.075688] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.075787] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.075863] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
[ 1.075957] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.076030] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.076121] usb usb7: Product: UHCI Host Controller
[ 1.076179] usb usb7: Manufacturer: Linux 4.0.0-0.rc4.git0.1.fc22.x86_64 uhci_hcd
[ 1.076272] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.076443] hub 7-0:1.0: USB hub found
[ 1.076503] hub 7-0:1.0: 2 ports detected
[ 1.076651] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.076755] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.076851] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.076926] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
[ 1.077049] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.077124] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.077227] usb usb8: Product: UHCI Host Controller
[ 1.077284] usb usb8: Manufacturer: Linux 4.0.0-0.rc4.git0.1.fc22.x86_64 uhci_hcd
[ 1.077377] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.077558] hub 8-0:1.0: USB hub found
[ 1.077618] hub 8-0:1.0: 2 ports detected
[ 1.077793] usbcore: registered new interface driver usbserial
[ 1.077859] usbcore: registered new interface driver usbserial_generic
[ 1.077925] usbserial: USB Serial support registered for generic
[ 1.078029] i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
[ 1.078090] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.079711] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.079871] mousedev: PS/2 mouse device common for all mice
[ 1.080248] rtc_cmos 00:01: RTC can wake from S4
[ 1.080491] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.080579] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.080721] device-mapper: uevent: version 1.0.3
[ 1.080872] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel at redhat.com
[ 1.081430] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.081611] usbcore: registered new interface driver usbhid
[ 1.081669] usbhid: USB HID core driver
[ 1.081797] drop_monitor: Initializing network drop monitor service
[ 1.081920] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.082063] TCP: cubic registered
[ 1.082122] Initializing XFRM netlink socket
[ 1.082296] NET: Registered protocol family 10
[ 1.082620] mip6: Mobile IPv6
[ 1.082676] NET: Registered protocol family 17
[ 1.083213] Loading compiled-in X.509 certificates
[ 1.084301] Loaded X.509 cert 'Fedora kernel signing key: 880e89b92d8bd5af182e4eb5d50dc2a73dc00556'
[ 1.084407] registered taskstats version 1
[ 1.084925] Magic number: 7:718:660
[ 1.085123] rtc_cmos 00:01: setting system clock to 2015-03-20 01:40:46 UTC (1426815646)
[ 1.085274] PM: Hibernation image not present or could not be loaded.
[ 1.093228] ata2.01: ATAPI: HL-DT-STDVD-RAM GH40N, NX05, max UDMA/100
[ 1.099280] ata2.01: configured for UDMA/100
[ 1.100914] ata1.01: ATA-8: ST3500418AS, CC65, max UDMA/100
[ 1.100978] ata1.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.105438] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.149273] ata1.01: configured for UDMA/100
[ 1.149448] scsi 0:0:1:0: Direct-Access ATA ST3500418AS CC65 PQ: 0 ANSI: 5
[ 1.149737] sd 0:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.149793] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 1.150076] sd 0:0:1:0: [sda] Write Protect is off
[ 1.150134] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.150150] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.153369] scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH40N NX05 PQ: 0 ANSI: 5
[ 1.164648] sda: sda1 sda2
[ 1.164786] sda: p2 size 871910146 extends beyond EOD, enabling native capacity
[ 1.165480] sda: sda1 sda2
[ 1.165605] sda: p2 size 871910146 extends beyond EOD, truncated
[ 1.165950] sd 0:0:1:0: [sda] Attached SCSI disk
[ 1.183859] sr 1:0:1:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.183954] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.184145] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 1.184223] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 1.226819] Freeing unused kernel memory: 1496K (ffffffff81d21000 - ffffffff81e97000)
[ 1.226913] Write protecting the kernel read-only data: 12288k
[ 1.227304] Freeing unused kernel memory: 448K (ffff880001790000 - ffff880001800000)
[ 1.227654] Freeing unused kernel memory: 760K (ffff880001b42000 - ffff880001c00000)
[ 1.229567] random: systemd urandom read with 34 bits of entropy available
[ 1.230357] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.230641] systemd[1]: Detected architecture 'x86-64'.
[ 1.230701] systemd[1]: Running in initial RAM disk.
[ 1.231045] systemd[1]: Set hostname to <localhost.chunshan>.
[ 1.263964] systemd[1]: Reached target Swap.
[ 1.264041] systemd[1]: Starting Swap.
[ 1.264503] systemd[1]: Created slice -.slice.
[ 1.264568] systemd[1]: Starting -.slice.
[ 1.264832] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.264898] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.265193] systemd[1]: Listening on Journal Audit Socket.
[ 1.265258] systemd[1]: Starting Journal Audit Socket.
[ 1.265549] systemd[1]: Created slice System Slice.
[ 1.265615] systemd[1]: Starting System Slice.
[ 1.265877] systemd[1]: Listening on udev Control Socket.
[ 1.265943] systemd[1]: Starting udev Control Socket.
[ 1.266191] systemd[1]: Reached target Local File Systems.
[ 1.266256] systemd[1]: Starting Local File Systems.
[ 1.266518] systemd[1]: Listening on Journal Socket.
[ 1.266583] systemd[1]: Starting Journal Socket.
[ 1.267041] systemd[1]: Starting Setup Virtual Console...
[ 1.267728] systemd[1]: Starting Journal Service...
[ 1.268524] systemd[1]: Starting Load Kernel Modules...
[ 1.269267] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.269580] systemd[1]: Started dracut ask for additional cmdline parameters.
[ 1.270227] systemd[1]: Starting dracut cmdline hook...
[ 1.270702] systemd[1]: Reached target Slices.
[ 1.270787] systemd[1]: Starting Slices.
[ 1.271108] systemd[1]: Listening on udev Kernel Socket.
[ 1.271187] systemd[1]: Starting udev Kernel Socket.
[ 1.271475] systemd[1]: Reached target Sockets.
[ 1.271550] systemd[1]: Starting Sockets.
[ 1.273160] systemd[1]: Reached target Timers.
[ 1.273274] systemd[1]: Starting Timers.
[ 1.278603] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.278697] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 1.279143] systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
[ 1.279762] systemd[1]: Failed to start Load Kernel Modules.
[ 1.279843] systemd[1]: Unit systemd-modules-load.service entered failed state.
[ 1.280060] audit: type=1130 audit(1426815646.693:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 1.280249] systemd[1]: systemd-modules-load.service failed.
[ 1.280690] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.280818] audit: type=1130 audit(1426815646.693:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.283383] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.284190] systemd[1]: Starting Apply Kernel Variables...
[ 1.286051] systemd[1]: Started Create Static Device Nodes in /dev.
[ 1.286155] audit: type=1130 audit(1426815646.699:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.288271] systemd[1]: Started Apply Kernel Variables.
[ 1.288370] audit: type=1130 audit(1426815646.701:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.297605] systemd[1]: Started Journal Service.
[ 1.297760] audit: type=1130 audit(1426815646.710:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.333484] audit: type=1130 audit(1426815646.746:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.358265] audit: type=1130 audit(1426815646.771:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.360706] audit: type=1130 audit(1426815646.773:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.361521] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 1.363447] audit: type=1130 audit(1426815646.776:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1.417152] pata_acpi 0000:00:03.2: enabling device (0004 -> 0005)
[ 1.420214] scsi host4: ata_generic
[ 1.420403] scsi host5: ata_generic
[ 1.420554] ata5: PATA max UDMA/100 cmd 0x1c88 ctl 0x1c7c bmdma 0x1c20 irq 18
[ 1.420640] ata6: PATA max UDMA/100 cmd 0x1c80 ctl 0x1c78 bmdma 0x1c28 irq 18
[ 1.420801] pps_core: LinuxPPS API ver. 1 registered
[ 1.420897] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 1.423041] usb 2-4: new high-speed USB device number 3 using ehci-pci
[ 1.423425] PTP clock support registered
[ 1.431661] [drm] Initialized drm 1.1.0 20060810
[ 1.443822] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.443896] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 1.445424] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.476980] usb 1-2: New USB device found, idVendor=05e3, idProduct=0718
[ 1.477066] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 1.477129] usb 1-2: Product: USB Storage
[ 1.477186] usb 1-2: SerialNumber: 000000000033
[ 1.483938] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 1.486278] scsi host6: usb-storage 1-2:1.0
[ 1.486444] usbcore: registered new interface driver usb-storage
[ 1.489125] usbcore: registered new interface driver uas
[ 1.500044] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[ 1.553416] usb 2-4: config 1 interface 0 altsetting 0 has 7 endpoint descriptors, different from the interface descriptor's value: 5
[ 1.560674] usb 2-4: New USB device found, idVendor=148f, idProduct=5370
[ 1.560738] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.560801] usb 2-4: Product: 802.11 n WLAN
[ 1.560859] usb 2-4: Manufacturer: Ralink
[ 1.560915] usb 2-4: SerialNumber: 1.0
[ 1.626278] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:86:ef:93:be
[ 1.626375] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.626532] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF
[ 1.627760] [drm] Memory usable by graphics device = 2048M
[ 1.627847] [drm] Replacing VGA console driver
[ 1.628648] Console: switching to colour dummy device 80x25
[ 1.632055] e1000e 0000:00:19.0 em1: renamed from eth0
[ 1.635126] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.635133] [drm] Driver supports precise vblank timestamp query.
[ 1.635195] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.638555] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20150204/video-1266)
[ 1.638564] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 1.638674] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input3
[ 1.638764] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
[ 1.656100] usb 7-1: New USB device found, idVendor=04b3, idProduct=310c
[ 1.656109] usb 7-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.656114] usb 7-1: Product: USB Optical Mouse
[ 1.672408] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:04B3:310C.0001/input/input4
[ 1.672531] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 1.688927] fbcon: inteldrmfb (fb0) is primary device
[ 1.745734] Console: switching to colour frame buffer device 180x56
[ 1.748396] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.748397] i915 0000:00:02.0: registered panic notifier
[ 2.495532] scsi 6:0:0:0: Direct-Access SAMSUNG HM501II 0009 PQ: 0 ANSI: 0
[ 2.495826] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.496619] sd 6:0:0:0: [sdb] 976773164 512-byte logical blocks: (500 GB/465 GiB)
[ 2.497641] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.497663] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2.498654] sd 6:0:0:0: [sdb] No Caching mode page found
[ 2.498676] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2.528887] random: nonblocking pool is initialized
[ 2.529503] sdb: sdb1 sdb2 sdb3 sdb4
[ 2.540004] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 3.351573] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.823649] systemd-journald[118]: Received SIGTERM from PID 1 (systemd).
[ 5.792740] SELinux: 2048 avtab hash slots, 104906 rules.
[ 5.808569] SELinux: 2048 avtab hash slots, 104906 rules.
[ 5.827707] SELinux: 8 users, 103 roles, 4995 types, 293 bools, 1 sens, 1024 cats
[ 5.827711] SELinux: 83 classes, 104906 rules
[ 5.832054] SELinux: Permission audit_read in class capability2 not defined in policy.
[ 5.832871] SELinux: Class binder not defined in policy.
[ 5.833666] SELinux: the above unknown classes and permissions will be allowed
[ 5.834459] SELinux: Completing initialization.
[ 5.834460] SELinux: Setting up existing superblocks.
[ 5.842831] audit_printk_skb: 102 callbacks suppressed
[ 5.843621] audit: type=1403 audit(1426815651.255:45): policy loaded auid=4294967295 ses=4294967295
[ 5.925290] systemd[1]: Successfully loaded SELinux policy in 367.089ms.
[ 6.103155] systemd[1]: Relabelled /dev and /run in 17.057ms.
[ 7.424667] systemd-sysv-generator[405]: Overwriting existing symlink /run/systemd/generator.late/netconsole.service with real service
[ 7.425570] systemd-sysv-generator[405]: Overwriting existing symlink /run/systemd/generator.late/network.service with real service
[ 7.426445] systemd-sysv-generator[405]: Overwriting existing symlink /run/systemd/generator.late/livesys.service with real service
[ 7.427296] systemd-sysv-generator[405]: Overwriting existing symlink /run/systemd/generator.late/livesys-late.service with real service
[ 10.548639] audit: type=1130 audit(1426815655.962:46): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.550378] audit: type=1131 audit(1426815655.964:47): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.552687] audit: type=1130 audit(1426815655.966:48): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.554695] audit: type=1131 audit(1426815655.968:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.713268] audit: type=1130 audit(1426815656.127:50): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck at dev-disk-by\x2duuid-323eb53f\x2d05f6\x2d4651\x2dbe2c\x2d8643bcefd89d comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 10.713288] audit: type=1131 audit(1426815656.127:51): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck at dev-disk-by\x2duuid-323eb53f\x2d05f6\x2d4651\x2dbe2c\x2d8643bcefd89d comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.278681] audit: type=1130 audit(1426815656.692:52): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.281734] audit: type=1131 audit(1426815656.695:53): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.299431] audit: type=1130 audit(1426815656.713:54): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 13.006984] RPC: Registered named UNIX socket transport module.
[ 13.008288] RPC: Registered udp transport module.
[ 13.009601] RPC: Registered tcp transport module.
[ 13.010883] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.294136] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 13.328308] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 13.665644] kdbus: module verification failed: signature and/or required key missing - tainting kernel
[ 13.667554] kdbus: initialized
[ 13.884262] systemd-journald[440]: Received request to flush runtime journal from PID 1
[ 15.855860] audit_printk_skb: 33 callbacks suppressed
[ 15.855861] audit: type=1130 audit(1426815661.269:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 19.385182] audit: type=1130 audit(1426815664.799:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 19.995476] parport_pc 00:04: reported by Plug and Play ACPI
[ 19.996741] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 20.219087] tpm_tis 00:07: 1.2 TPM (device-id 0xFE, rev-id 70)
[ 20.268075] tpm_tis 00:07: TPM is disabled/deactivated (0x6)
[ 21.214420] wmi: Mapper loaded
[ 21.392385] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102f conflicts with OpRegion 0x0000000000001000-0x000000000000102f (\_SB_.PCI0.LPC0.PMIO) (20150204/utaddress-258)
[ 21.394948] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.396241] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011af (\_SB_.PCI0.LPC0.GPOX) (20150204/utaddress-258)
[ 21.398943] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.400384] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 21.460808] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 21.462273] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 21.605282] iTCO_vendor_support: vendor-support=0
[ 21.637481] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 21.638817] iTCO_wdt: Found a ICH10DO TCO device (Version=2, TCOBASE=0x1060)
[ 21.640224] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.843236] ppdev: user-space parallel port driver
[ 22.134040] gpio_ich: GPIO from 440 to 511 on gpio_ich
[ 24.674560] sound hdaudioC0D2: autoconfig for AD1882: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
[ 24.675906] sound hdaudioC0D2: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
[ 24.677226] sound hdaudioC0D2: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 24.678525] sound hdaudioC0D2: mono: mono_out=0x0
[ 24.679825] sound hdaudioC0D2: inputs:
[ 24.681102] sound hdaudioC0D2: Front Mic=0x14
[ 24.682376] sound hdaudioC0D2: Rear Mic=0x17
[ 24.683651] sound hdaudioC0D2: Line=0x15
[ 24.684931] sound hdaudioC0D2: CD=0x18
[ 24.700699] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 24.703413] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 24.704784] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 24.706130] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 24.707614] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 26.399609] Adding 2097148k swap on /dev/sdb3. Priority:-1 extents:1 across:2097148k FS
[ 26.472080] audit: type=1130 audit(1426815671.886:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck at dev-disk-by\x2duuid-7c7a3b94\x2dad1a\x2d4fc9\x2db1dd\x2df52305ff625a comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 26.559790] cfg80211: Calling CRDA to update world regulatory domain
[ 27.517054] usb 2-4: reset high-speed USB device number 3 using ehci-pci
[ 27.644805] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 27.674430] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 27.875791] cfg80211: World regulatory domain updated:
[ 27.877135] cfg80211: DFS Master region: unset
[ 27.877152] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 27.879791] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 27.881087] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 27.882367] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 27.883629] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 27.884902] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 27.886195] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 27.887460] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 27.888725] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 28.038518] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 28.038866] usbcore: registered new interface driver rt2800usb
[ 28.094454] rt2800usb 2-4:1.0 wlp0s29f7u4: renamed from wlan0
[ 28.219319] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 28.613117] cfg80211: Calling CRDA for country: CN
[ 28.616907] cfg80211: Regulatory domain changed to country: CN
[ 28.618036] cfg80211: DFS Master region: FCC
[ 28.618052] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 28.620247] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 28.621371] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[ 28.622499] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 28.623624] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 28.624741] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 28.625856] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 28.626966] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 28.645113] audit: type=1130 audit(1426815674.059:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 28.787098] audit: type=1130 audit(1426815674.201:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill at rfkill0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 29.689092] audit: type=1130 audit(1426815675.103:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 29.979695] audit: type=1130 audit(1426815675.393:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 29.983914] audit: type=1131 audit(1426815675.396:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 30.133451] audit: type=1130 audit(1426815675.547:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 30.133469] audit: type=1131 audit(1426815675.547:75): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 30.191745] audit: type=1130 audit(1426815675.605:76): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 30.396764] audit: type=1130 audit(1426815675.810:77): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 52.304629] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 55.547503] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 60.759375] Ebtables v2.0 registered
[ 60.896189] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 69.596752] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
[ 69.784185] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
[ 69.786326] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u4: link is not ready
[ 69.787247] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 70.006388] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 70.209116] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u4: link is not ready
[ 71.466273] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u4: link is not ready
[ 72.720061] IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u4: link is not ready
[ 72.741922] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u4: link becomes ready
[ 72.765912] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 72.975454] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
[ 73.070162] e1000e: em1 NIC Link is Down
[ 73.256158] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
[ 76.116928] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 76.118076] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
[ 80.259378] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 120.926019] Adjusting hpet more than 11% (2611944593 vs 2601267907)
[ 181.490107] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[ 203.070197] fuse init (API version 7.23)
[ 206.007189] Bluetooth: Core ver 2.20
[ 206.007289] NET: Registered protocol family 31
[ 206.007291] Bluetooth: HCI device and connection manager initialized
[ 206.007296] Bluetooth: HCI socket layer initialized
[ 206.007299] Bluetooth: L2CAP socket layer initialized
[ 206.007305] Bluetooth: SCO socket layer initialized
[ 207.159300] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 207.159305] Bluetooth: BNEP filters: protocol multicast
[ 207.159309] Bluetooth: BNEP socket layer initialized
[ 212.943132] do_trap: 36 callbacks suppressed
[ 212.943137] traps: gsettings-data-[1840] trap int3 ip:2b74980514cb sp:7fff9d954f70 error:0
[ 213.315210] traps: gsettings-data-[1952] trap int3 ip:2ab0c35da4cb sp:7ffd6ac896d0 error:0
More information about the Intel-gfx
mailing list