[Intel-gfx] [PATCH 20/49] drm/i915/bxt: Add change to support gmbus pin pair for BXT

[Jani Nikula]

On Tue, 17 Mar 2015, Imre Deak <imre.deak at intel.com> wrote:
> From: "A.Sunil Kamath" <sunil.kamath at intel.com>
>
> For BXT gmbus is pulled from GPU to CPU. From implementation
> point of view only pin pair configuration will change. The
> existing implementation supports all platforms previous to GEN8
> and also SKL. But for BXT pin pair configuration
> is completely different than SKL or other previous GEN's.
> This patch introduces the new pin pair configuration structure
> specific to BXT and also ensures every real gmbus port has a
> gpio pin.
>
> Tested on BDW hardware to confirm it doesnt break anything
> in existing platform.
>
> For BDW pin pair config will remain as:
> gmbus[0]: Name = i915 gmbus ssc, gpio_reg = c5014, reg0 = 1
> gmbus[1]: Name = i915 gmbus vga, gpio_reg = c5010, reg0 = 2
> gmbus[2]: Name = i915 gmbus panel, gpio_reg = c5018, reg0 = 3
> gmbus[3]: Name = i915 gmbus dpc, gpio_reg = c501c, reg0 = 4
> gmbus[4]: Name = i915 gmbus dpb, gpio_reg = c5020, reg0 = 5
> gmbus[5]: Name = i915 gmbus dpd, gpio_reg = c5024, reg0 = 6
>
> BXT will have:
> gmbus[0]: name = i915 gmbus None, gpio_reg = 0, reg0 = 0
> gmbus[1]: name = i915 gmbus None, gpio_reg = 0, reg0 = 0
> gmbus[2]: name = i915 gmbus None, gpio_reg = 0, reg0 = 0
> gmbus[3]: name = i915 gmbus dpc, gpio_reg = c5018, reg0 = 2
> gmbus[4]: name = i915 gmbus dpb, gpio_reg = c5014, reg0 = 1
> gmbus[5]: name = i915 gmbus misc, gpio_reg = c501c, reg0 = 3
>
> Values of GMBUS_PORT_DPB, GMBUS_PORT_DPC, GMBUS_PORT_DPD is
> retained as it is like other platforms. Only logic in gmbus
> structure creation is changed to minimize changes in multiple
> files.
>
> v1: Initial release
> Structure gmbus_ports_bxt  created for 3 ports only.
> Here for BXT, gmbus[0], gmbus[1], gmbus[2] is untouched.
> Logic used to calculate pin from respective register address as:
> pin = reg & 0x000f >> 2
>
> v2: Incorporated review comments from Jani Nikula.
> Added a full bxt specific gmbus_ports_bxt and used it for bxt
> regardless of pin >= 4.
> Added const char *name and initialized it conditionally to
> IS_BROXTON() so and avoided duplication of snprintf.
> Added port_to_pin_bxt(port) function which returns right
> pin value for a port for bxt platform.
>
> Issue: VIZ-3574
> Signed-off-by: A.Sunil Kamath <sunil.kamath at intel.com>
> Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_i2c.c | 55 +++++++++++++++++++++++++++++++++++-----
>  1 file changed, 49 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
> index b31088a..3aa31e1 100644
> --- a/drivers/gpu/drm/i915/intel_i2c.c
> +++ b/drivers/gpu/drm/i915/intel_i2c.c
> @@ -48,6 +48,16 @@ static const struct gmbus_port gmbus_ports[] = {
>  	{ "dpd", GPIOF },
>  };
>  
> +/* gmbus pin pair configuration for bxt */
> +static const struct gmbus_port gmbus_ports_bxt[] = {
> +	{ "None", 0 },
> +	{ "None", 0 },
> +	{ "None", 0 },
> +	{ "dpc", PCH_GPIOC },
> +	{ "dpb", PCH_GPIOB },
> +	{ "misc", PCH_GPIOD },
> +};
> +
>  /* Intel GPIO access functions */
>  
>  #define I2C_RISEFALL_TIME 10
> @@ -185,12 +195,17 @@ static void
>  intel_gpio_setup(struct intel_gmbus *bus, u32 pin)
>  {
>  	struct drm_i915_private *dev_priv = bus->dev_priv;
> +	struct drm_device *dev = dev_priv->dev;

IS_BROXTON() eats dev_priv too so this is not needed.

Reviewed-by: Jani Nikula <jani.nikula at intel.com>


>  	struct i2c_algo_bit_data *algo;
>  
>  	algo = &bus->bit_algo;
>  
>  	/* -1 to map pin pair to gmbus index */
> -	bus->gpio_reg = dev_priv->gpio_mmio_base + gmbus_ports[pin - 1].reg;
> +	if (IS_BROXTON(dev))
> +		bus->gpio_reg = gmbus_ports_bxt[pin - 1].reg;
> +	else
> +		bus->gpio_reg = dev_priv->gpio_mmio_base
> +				+ gmbus_ports[pin - 1].reg;
>  
>  	bus->adapter.algo_data = algo;
>  	algo->setsda = set_data;
> @@ -510,6 +525,27 @@ static const struct i2c_algorithm gmbus_algorithm = {
>  	.functionality	= gmbus_func
>  };
>  
> +/* returns mapped pin for a port in BXT */
> +static u32 port_to_pin_bxt(u32 port)
> +{
> +	u32 pin;
> +
> +	switch (port) {
> +	case GMBUS_PORT_DPB:
> +		pin = 1;
> +		break;
> +	case GMBUS_PORT_DPC:
> +		pin = 2;
> +		break;
> +	case GMBUS_PORT_DPD:
> +		pin = 3;
> +		break;
> +	default:
> +		pin = 0;
> +	}
> +	return pin;
> +}
> +
>  /**
>   * intel_gmbus_setup - instantiate all Intel i2c GMBuses
>   * @dev: DRM device
> @@ -534,13 +570,17 @@ int intel_setup_gmbus(struct drm_device *dev)
>  	for (i = 0; i < GMBUS_NUM_PORTS; i++) {
>  		struct intel_gmbus *bus = &dev_priv->gmbus[i];
>  		u32 port = i + 1; /* +1 to map gmbus index to pin pair */
> +		const char *name;
>  
>  		bus->adapter.owner = THIS_MODULE;
>  		bus->adapter.class = I2C_CLASS_DDC;
> -		snprintf(bus->adapter.name,
> -			 sizeof(bus->adapter.name),
> -			 "i915 gmbus %s",
> -			 gmbus_ports[i].name);
> +		if (IS_BROXTON(dev))
> +			name = gmbus_ports_bxt[i].name;
> +		else
> +			name = gmbus_ports[i].name;
> +
> +		snprintf(bus->adapter.name, sizeof(bus->adapter.name),
> +			 "i915 gmbus %s", name);
>  
>  		bus->adapter.dev.parent = &dev->pdev->dev;
>  		bus->dev_priv = dev_priv;
> @@ -548,7 +588,10 @@ int intel_setup_gmbus(struct drm_device *dev)
>  		bus->adapter.algo = &gmbus_algorithm;
>  
>  		/* By default use a conservative clock rate */
> -		bus->reg0 = port | GMBUS_RATE_100KHZ;
> +		if (IS_BROXTON(dev))
> +			bus->reg0 = port_to_pin_bxt(port) | GMBUS_RATE_100KHZ;
> +		else
> +			bus->reg0 = port | GMBUS_RATE_100KHZ;
>  
>  		/* gmbus seems to be broken on i830 */
>  		if (IS_I830(dev))
> -- 
> 2.1.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Jani Nikula, Intel Open Source Technology Center