[Intel-gfx] [PATCH i-g-t 2/2] tests: Add test for pipe B and C interactions in IVB
Thomas Wood
thomas.wood at intel.com
Mon Mar 30 04:27:13 PDT 2015
On 30 March 2015 at 08:03, Ander Conselvan de Oliveira
<ander.conselvan.de.oliveira at intel.com> wrote:
> The tests exercise different combinations of enabling pipe B with modes
> that require more than 2 lanes and then enabling pipe C.
>
> v2: Added a couple more tests for different pipe transitions. (Ander)
> Use custom modes to make the test reliable. (Daniel)
>
> v3: Add IGT_TEST_DESCRIPTION. (Thomas)
> Add test to .gitignore. (Thomas)
> Rename test to kms_pipe_b_c_ivb. (Ander)
> ---
> tests/.gitignore | 1 +
> tests/Makefile.sources | 1 +
> tests/kms_pipe_b_c_ivb.c | 290 +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 292 insertions(+)
> create mode 100644 tests/kms_pipe_b_c_ivb.c
>
> diff --git a/tests/.gitignore b/tests/.gitignore
> index 843db4a..1f0e2d1 100644
> --- a/tests/.gitignore
> +++ b/tests/.gitignore
> @@ -132,6 +132,7 @@ kms_flip_event_leak
> kms_flip_tiling
> kms_force_connector
> kms_mmio_vs_cs_flip
> +kms_pipe_b_c_ivb
> kms_pipe_crc_basic
> kms_plane
> kms_psr_sink_crc
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index 0a974a6..93e05e4 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -75,6 +75,7 @@ TESTS_progs_M = \
> kms_flip_tiling \
> kms_flip_event_leak \
> kms_mmio_vs_cs_flip \
> + kms_pipe_b_c_ivb \
> kms_pipe_crc_basic \
> kms_plane \
> kms_psr_sink_crc \
> diff --git a/tests/kms_pipe_b_c_ivb.c b/tests/kms_pipe_b_c_ivb.c
> new file mode 100644
> index 0000000..74d84f1
> --- /dev/null
> +++ b/tests/kms_pipe_b_c_ivb.c
> @@ -0,0 +1,290 @@
> +/*
> + * Copyright © 2015 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + * Authors:
> + * Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
> + */
> +
> +#include "drmtest.h"
> +#include "igt_kms.h"
> +#include "intel_chipset.h"
> +
> +IGT_TEST_DESCRIPTION(
> +"Exercise the FDI lane bifurcation code for IVB in the kernel by setting"
> +"different combinations of modes for pipes B and C.");
> +
> +typedef struct {
> + int drm_fd;
> + igt_display_t display;
> +} data_t;
> +
> +drmModeModeInfo mode_3_lanes = {
> + .clock = 173000,
> + .hdisplay = 1920,
> + .hsync_start = 2048,
> + .hsync_end = 2248,
> + .htotal = 2576,
> + .vdisplay = 1080,
> + .vsync_start = 1083,
> + .vsync_end = 1088,
> + .vtotal = 1120,
> + .vrefresh = 60,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC,
> + .name = "3_lanes",
> +};
> +
> +drmModeModeInfo mode_2_lanes = {
> + .clock = 138500,
> + .hdisplay = 1920,
> + .hsync_start = 1968,
> + .hsync_end = 2000,
> + .htotal = 2080,
> + .vdisplay = 1080,
> + .vsync_start = 1083,
> + .vsync_end = 1088,
> + .vtotal = 1111,
> + .vrefresh = 60,
> + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
> + .name = "2_lanes",
> +};
> +
> +static int
> +disable_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
> +{
> + igt_plane_t *primary;
> +
> + igt_output_set_pipe(output, pipe);
> + primary = igt_output_get_plane(output, 0);
> + igt_plane_set_fb(primary, NULL);
> + return igt_display_commit(&data->display);
> +}
> +
> +static int
> +set_mode_on_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
> +{
> + igt_plane_t *primary;
> + drmModeModeInfo *mode;
> + struct igt_fb fb;
> + int fb_id;
> +
> + igt_output_set_pipe(output, pipe);
> +
> + mode = igt_output_get_mode(output);
> +
> + primary = igt_output_get_plane(output, 0);
> +
> + fb_id = igt_create_color_fb(data->drm_fd,
> + mode->hdisplay, mode->vdisplay,
> + DRM_FORMAT_XRGB8888, I915_TILING_NONE,
> + 1.0, 1.0, 1.0, &fb);
> + igt_assert(fb_id >= 0);
> +
> + igt_plane_set_fb(primary, &fb);
> + return igt_display_try_commit2(&data->display, COMMIT_LEGACY);
> +}
> +
> +static int
> +set_big_mode_on_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
> +{
> + igt_output_override_mode(output, &mode_3_lanes);
> + return set_mode_on_pipe(data, pipe, output);
> +}
> +
> +static int
> +set_normal_mode_on_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
> +{
> + igt_output_override_mode(output, &mode_2_lanes);
> + return set_mode_on_pipe(data, pipe, output);
> +}
> +
> +static void
> +find_outputs(data_t *data, igt_output_t **output1, igt_output_t **output2)
> +{
> + int count = 0;
> + igt_output_t *output;
> +
> + *output1 = NULL;
> + *output2 = NULL;
> +
> + for_each_connected_output(&data->display, output) {
> + if (!(*output1))
> + *output1 = output;
> + else if (!(*output2))
> + *output2 = output;
> +
> + igt_output_set_pipe(output, PIPE_ANY);
> + count++;
> + }
> +
> + igt_skip_on_f(count < 2, "Not enough connected outputs\n");
> +}
> +
> +static void
> +test_dpms(data_t *data)
> +{
> + igt_output_t *output1, *output2;
> + int ret;
> +
> + find_outputs(data, &output1, &output2);
> +
> + igt_info("Pipe %s will use connector %s\n",
> + kmstest_pipe_name(PIPE_B), igt_output_name(output1));
> + igt_info("Pipe %s will use connector %s\n",
> + kmstest_pipe_name(PIPE_C), igt_output_name(output2));
> +
> + ret = set_big_mode_on_pipe(data, PIPE_B, output1);
> + igt_assert(ret == 0);
> +
> + kmstest_set_connector_dpms(data->drm_fd, output1->config.connector, DRM_MODE_DPMS_OFF);
> +
> + ret = set_big_mode_on_pipe(data, PIPE_C, output2);
> + igt_assert(ret != 0);
> +}
> +
> +static void
> +test_lane_reduction(data_t *data)
> +{
> + igt_output_t *output1, *output2;
> + int ret;
> +
> + find_outputs(data, &output1, &output2);
> +
> + igt_info("Pipe %s will use connector %s\n",
> + kmstest_pipe_name(PIPE_B), igt_output_name(output1));
> + igt_info("Pipe %s will use connector %s\n",
> + kmstest_pipe_name(PIPE_C), igt_output_name(output2));
> +
> + ret = set_big_mode_on_pipe(data, PIPE_B, output1);
> + igt_assert(ret == 0);
> +
> + ret = set_normal_mode_on_pipe(data, PIPE_B, output1);
> + igt_assert(ret == 0);
> +
> + ret = set_normal_mode_on_pipe(data, PIPE_C, output2);
> + igt_assert(ret == 0);
> +}
> +
> +static void
> +test_disable_pipe_B(data_t *data)
> +{
> + igt_output_t *output1, *output2;
> + int ret;
> +
> + find_outputs(data, &output1, &output2);
> +
> + igt_info("Pipe %s will use connector %s\n",
> + kmstest_pipe_name(PIPE_B), igt_output_name(output1));
> + igt_info("Pipe %s will use connector %s\n",
> + kmstest_pipe_name(PIPE_C), igt_output_name(output2));
> +
> + ret = set_big_mode_on_pipe(data, PIPE_B, output1);
> + igt_assert(ret == 0);
> +
> + ret = disable_pipe(data, PIPE_B, output1);
> + igt_assert(ret == 0);
> +
> + ret = set_normal_mode_on_pipe(data, PIPE_C, output2);
> + igt_assert(ret == 0);
> +
> + ret = set_normal_mode_on_pipe(data, PIPE_B, output1);
> + igt_assert(ret == 0);
> +}
> +
> +static void
> +test_from_C_to_B_with_3_lanes(data_t *data)
> +{
> + igt_output_t *output1, *output2;
> + int ret;
> +
> + find_outputs(data, &output1, &output2);
> +
> + igt_info("Pipe %s will use connector %s\n",
> + kmstest_pipe_name(PIPE_B), igt_output_name(output1));
> + igt_info("Pipe %s will use connector %s\n",
> + kmstest_pipe_name(PIPE_C), igt_output_name(output2));
> +
> + ret = set_normal_mode_on_pipe(data, PIPE_C, output2);
> + igt_assert(ret == 0);
> +
> + ret = disable_pipe(data, PIPE_C, output2);
> + igt_assert(ret == 0);
> +
> + ret = set_big_mode_on_pipe(data, PIPE_B, output1);
> + igt_assert(ret == 0);
> +}
> +
> +static void
> +test_fail_enable_pipe_C_while_B_has_3_lanes(data_t *data)
> +{
> + igt_output_t *output1, *output2;
> + int ret;
> +
> + find_outputs(data, &output1, &output2);
> +
> + igt_info("Pipe %s will use connector %s\n",
> + kmstest_pipe_name(PIPE_B), igt_output_name(output1));
> + igt_info("Pipe %s will use connector %s\n",
> + kmstest_pipe_name(PIPE_C), igt_output_name(output2));
> +
> + ret = set_big_mode_on_pipe(data, PIPE_B, output1);
> + igt_assert(ret == 0);
> +
> + ret = set_normal_mode_on_pipe(data, PIPE_C, output2);
> + igt_assert(ret != 0);
> +}
> +
> +static data_t data;
> +igt_main
> +{
> + int devid;
> +
> + igt_skip_on_simulation();
> +
> + igt_fixture {
> + data.drm_fd = drm_open_any_master();
> + devid = intel_get_drm_devid(data.drm_fd);
> +
> + kmstest_set_vt_graphics_mode();
> + igt_display_init(&data.display, data.drm_fd);
> + }
> +
> + igt_skip_on(!IS_IVYBRIDGE(devid));
This needs to go inside an igt_fixture block so that subtest
enumeration works correctly.
> +
> + igt_subtest("pipe-B-dpms-off-modeset-pipe-C")
> + test_dpms(&data);
> +
> + igt_subtest("pipe-B-double-modeset-then-modeset-pipe-C")
> + test_lane_reduction(&data);
> +
> + igt_subtest("disable-pipe-B-enable-pipe-C")
> + test_disable_pipe_B(&data);
> +
> + igt_subtest("from-pipe-C-to-B-with-3-lanes")
> + test_from_C_to_B_with_3_lanes(&data);
> +
> + igt_subtest("enable-pipe-C-while-B-has-3-lanes")
> + test_fail_enable_pipe_C_while_B_has_3_lanes(&data);
> +
> + igt_fixture {
> + igt_display_fini(&data.display);
> + }
> +}
> --
> 2.1.0
>
More information about the Intel-gfx
mailing list