[Intel-gfx] [PATCH 08/16] drm/i915: Add RPS thresholds to debugfs/i915_frequency_info

[Daniel Vetter]

On Mon, Apr 27, 2015 at 01:41:19PM +0100, Chris Wilson wrote:
> Expose some more of our internal RPS bookkeeping for debugging.
> 
> Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c | 25 +++++++++++++++++++++----
>  1 file changed, 21 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index ab55641a0b78..2cbb3e9266f0 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -1217,12 +1217,17 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
>  			   GEN6_CURBSYTAVG_MASK);
>  		seq_printf(m, "RP PREV UP: %dus\n", rpprevup &
>  			   GEN6_CURBSYTAVG_MASK);
> +		seq_printf(m, "Up threshold: %d%%\n",
> +			   dev_priv->rps.up_threshold);
> +
>  		seq_printf(m, "RP CUR DOWN EI: %dus\n", rpdownei &
>  			   GEN6_CURIAVG_MASK);
>  		seq_printf(m, "RP CUR DOWN: %dus\n", rpcurdown &
>  			   GEN6_CURBSYTAVG_MASK);
>  		seq_printf(m, "RP PREV DOWN: %dus\n", rpprevdown &
>  			   GEN6_CURBSYTAVG_MASK);
> +		seq_printf(m, "Down threshold: %d%%\n",
> +			   dev_priv->rps.down_threshold);
>  
>  		max_freq = (rp_state_cap & 0xff0000) >> 16;
>  		max_freq *= (IS_SKYLAKE(dev) ? GEN9_FREQ_SCALER : 1);
> @@ -1238,12 +1243,21 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
>  		max_freq *= (IS_SKYLAKE(dev) ? GEN9_FREQ_SCALER : 1);
>  		seq_printf(m, "Max non-overclocked (RP0) frequency: %dMHz\n",
>  			   intel_gpu_freq(dev_priv, max_freq));
> -
>  		seq_printf(m, "Max overclocked frequency: %dMHz\n",
>  			   intel_gpu_freq(dev_priv, dev_priv->rps.max_freq));
>  
> +		seq_printf(m, "Current freq: %d MHz\n",
> +			   intel_gpu_freq(dev_priv, dev_priv->rps.cur_freq));
> +		seq_printf(m, "Actual freq: %d MHz\n", cagf);
>  		seq_printf(m, "Idle freq: %d MHz\n",
>  			   intel_gpu_freq(dev_priv, dev_priv->rps.idle_freq));
> +		seq_printf(m, "Min freq: %d MHz\n",
> +			   intel_gpu_freq(dev_priv, dev_priv->rps.min_freq));
> +		seq_printf(m, "Max freq: %d MHz\n",
> +			   intel_gpu_freq(dev_priv, dev_priv->rps.max_freq));
> +		seq_printf(m,
> +			   "efficient (RPe) frequency: %d MHz\n",
> +			   intel_gpu_freq(dev_priv, dev_priv->rps.efficient_freq));
>  	} else if (IS_VALLEYVIEW(dev)) {
>  		u32 freq_sts;
>  
> @@ -1252,6 +1266,12 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
>  		seq_printf(m, "PUNIT_REG_GPU_FREQ_STS: 0x%08x\n", freq_sts);
>  		seq_printf(m, "DDR freq: %d MHz\n", dev_priv->mem_freq);
>  
> +		seq_printf(m, "actual GPU freq: %d MHz\n",
> +			   intel_gpu_freq(dev_priv, (freq_sts >> 8) & 0xff));
> +
> +		seq_printf(m, "current GPU freq: %d MHz\n",
> +			   intel_gpu_freq(dev_priv, dev_priv->rps.cur_freq));
> +
>  		seq_printf(m, "max GPU freq: %d MHz\n",
>  			   intel_gpu_freq(dev_priv, dev_priv->rps.max_freq));

Refactoring the common code here would be pretty. Anyway, queued for
-next, thanks for the patch.
-Daniel

>  
> @@ -1264,9 +1284,6 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
>  		seq_printf(m,
>  			   "efficient (RPe) frequency: %d MHz\n",
>  			   intel_gpu_freq(dev_priv, dev_priv->rps.efficient_freq));
> -
> -		seq_printf(m, "current GPU freq: %d MHz\n",
> -			   intel_gpu_freq(dev_priv, (freq_sts >> 8) & 0xff));
>  		mutex_unlock(&dev_priv->rps.hw_lock);
>  	} else {
>  		seq_puts(m, "no P-state info available\n");
> -- 
> 2.1.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch