[Intel-gfx] [PATCH 1/2] drm/i915/dp: there is no audio on port A on non-DDI platforms

[Sivakumar Thulasimani]

two points
1) The eDP spec says Audio is optional so it is allowed to have audio, 
but i am yet to come across any eDP panel that supports Audio.
2) Also, there is no support for audio in DDI A port as well :)

So please change the check to

if (!is_edp(encoder))

On 5/5/2015 2:39 PM, Jani Nikula wrote:
> On Tue, 05 May 2015, Sivakumar Thulasimani <sivakumar.thulasimani at intel.com> wrote:
>> On 5/4/2015 7:50 PM, Jani Nikula wrote:
>>> The eDP port A register on PCH split platforms has a slightly different
>>> register layout from the other ports, with bit 6 being either alternate
>>> scrambler reset or reserved, depending on the generation. Our
>>> misinterpretation of the bit as audio has lead to warnings.
>>>
>>> Fix this by not enabling audio on port A on non-DDI platforms. The check
>>> could be made more specific, but this corresponds to the audio codec
>>> enabling code which emits the warning for port A.
>> shouldn't we disable audio for eDP on all platforms , including DDI ones ?
>>> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89958
>>> Reported-and-tested-by: Chris Bainbridge <chris.bainbridge at gmail.com>
>>> Cc: stable at vger.kernel.org
>>> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
>>> ---
>>>    drivers/gpu/drm/i915/intel_dp.c | 5 +++--
>>>    1 file changed, 3 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
>>> index 937ba31d8dde..fa71fb4d6542 100644
>>> --- a/drivers/gpu/drm/i915/intel_dp.c
>>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>>> @@ -1355,7 +1355,8 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>>>    
>>>    	pipe_config->has_dp_encoder = true;
>>>    	pipe_config->has_drrs = false;
>>> -	pipe_config->has_audio = intel_dp->has_audio;
>>> +	if (HAS_DDI(dev) || port != PORT_A)
>>> +		pipe_config->has_audio = intel_dp->has_audio;
>>>    
>> this still enables audio for PORT_A on for HSW/BDW/etc .  the following
>> is better IMO
>>
>> +	if (!is_edp(encoder))
>> +		pipe_config->has_audio = intel_dp->has_audio;
> I wanted the check to match what's in intel_audio.c for these
> platforms. And those only need the pipe.
>
> Perhaps it's a theoretical question, but is it impossible for edp to
> have audio?
>
> Jani.
>
>
>
>
>>
>>
>> -- 
>> regards,
>> Sivakumar
>>

-- 
regards,
Sivakumar