[Intel-gfx] [PATCH 08/12] drm/i915: Fix the IBX transcoder B workarounds
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Tue May 5 07:17:34 PDT 2015
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Currently the IBX transcoder B workarounds are not working correctly.
Well, the HDMI one seems to be working somewhat, but the DP one is
definitely busted.
After a bit of experimentation it looks like the best way to make this
work is first disable the port on transcoder B, and then re-enable it
transcoder A, and immediately disable it again.
We can also clean up the code by noting that we can't be called without
a valid crtc. And also note that port A on ILK does not need the
workaround, so let's check for that one too.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 37 ++++++++++++++++-------------
drivers/gpu/drm/i915/intel_hdmi.c | 50 ++++++++++++++++++---------------------
drivers/gpu/drm/i915/intel_sdvo.c | 41 +++++++++++++-------------------
3 files changed, 60 insertions(+), 68 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 17b006c..3401cde 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3821,6 +3821,7 @@ static void
intel_dp_link_down(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
enum port port = intel_dig_port->port;
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3837,34 +3838,38 @@ intel_dp_link_down(struct intel_dp *intel_dp)
if ((IS_GEN7(dev) && port == PORT_A) ||
(HAS_PCH_CPT(dev) && port != PORT_A)) {
DP &= ~DP_LINK_TRAIN_MASK_CPT;
- I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT);
+ DP |= DP_LINK_TRAIN_PAT_IDLE_CPT;
} else {
if (IS_CHERRYVIEW(dev))
DP &= ~DP_LINK_TRAIN_MASK_CHV;
else
DP &= ~DP_LINK_TRAIN_MASK;
- I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE);
+ DP |= DP_LINK_TRAIN_PAT_IDLE;
}
+ I915_WRITE(intel_dp->output_reg, DP);
POSTING_READ(intel_dp->output_reg);
- if (HAS_PCH_IBX(dev) &&
- I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
- /* Hardware workaround: leaving our transcoder select
- * set to transcoder B while it's off will prevent the
- * corresponding HDMI output on transcoder A.
- *
- * Combine this with another hardware workaround:
- * transcoder select bit can only be cleared while the
- * port is enabled.
- */
- DP &= ~DP_PIPEB_SELECT;
+ DP &= ~(DP_PORT_EN | DP_AUDIO_OUTPUT_ENABLE);
+ I915_WRITE(intel_dp->output_reg, DP);
+ POSTING_READ(intel_dp->output_reg);
+
+ /*
+ * HW workaround for IBX, we need to move the port
+ * to transcoder A after disabling it to allow the
+ * matching HDMI port to be enabled on transcoder A.
+ */
+ if (HAS_PCH_IBX(dev) && crtc->pipe == PIPE_B && port != PORT_A) {
+ /* always enable with pattern 1 (as per spec) */
+ DP &= ~(DP_PIPEB_SELECT | DP_LINK_TRAIN_MASK);
+ DP |= DP_PORT_EN | DP_LINK_TRAIN_PAT_1;
+ I915_WRITE(intel_dp->output_reg, DP);
+ POSTING_READ(intel_dp->output_reg);
+
+ DP &= ~DP_PORT_EN;
I915_WRITE(intel_dp->output_reg, DP);
POSTING_READ(intel_dp->output_reg);
}
- DP &= ~DP_AUDIO_OUTPUT_ENABLE;
- I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
- POSTING_READ(intel_dp->output_reg);
msleep(intel_dp->panel_power_down_delay);
}
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 308015e..9b9a69e 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1096,39 +1096,13 @@ static void intel_disable_hdmi(struct intel_encoder *encoder)
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
u32 temp;
- u32 enable_bits = SDVO_ENABLE | SDVO_AUDIO_ENABLE;
if (crtc->config->has_audio)
intel_audio_codec_disable(encoder);
temp = I915_READ(intel_hdmi->hdmi_reg);
- /* HW workaround for IBX, we need to move the port to transcoder A
- * before disabling it. */
- if (HAS_PCH_IBX(dev)) {
- struct drm_crtc *crtc = encoder->base.crtc;
- int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1;
-
- if (temp & SDVO_PIPE_B_SELECT) {
- temp &= ~SDVO_PIPE_B_SELECT;
- I915_WRITE(intel_hdmi->hdmi_reg, temp);
- POSTING_READ(intel_hdmi->hdmi_reg);
-
- /* Again we need to write this twice. */
- I915_WRITE(intel_hdmi->hdmi_reg, temp);
- POSTING_READ(intel_hdmi->hdmi_reg);
-
- /* Transcoder selection bits only update
- * effectively on vblank. */
- if (crtc)
- intel_wait_for_vblank(dev, pipe);
- else
- msleep(50);
- }
- }
-
- temp &= ~enable_bits;
-
+ temp &= ~(SDVO_ENABLE | SDVO_AUDIO_ENABLE);
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
@@ -1136,6 +1110,28 @@ static void intel_disable_hdmi(struct intel_encoder *encoder)
chv_powergate_phy_lanes(encoder, 0xf);
intel_hdmi->set_infoframes(&encoder->base, false, NULL);
+
+ /*
+ * HW workaround for IBX, we need to move the port
+ * to transcoder A after disabling it to allow the
+ * matching DP port to be enabled on transcoder A.
+ */
+ if (HAS_PCH_IBX(dev) && crtc->pipe == PIPE_B) {
+ temp &= ~SDVO_PIPE_B_SELECT;
+ temp |= SDVO_ENABLE;
+ /*
+ * HW workaround, need to write this twice for issue
+ * that may result in first write getting masked.
+ */
+ I915_WRITE(intel_hdmi->hdmi_reg, temp);
+ POSTING_READ(intel_hdmi->hdmi_reg);
+ I915_WRITE(intel_hdmi->hdmi_reg, temp);
+ POSTING_READ(intel_hdmi->hdmi_reg);
+
+ temp &= ~SDVO_ENABLE;
+ I915_WRITE(intel_hdmi->hdmi_reg, temp);
+ POSTING_READ(intel_hdmi->hdmi_reg);
+ }
}
static int hdmi_portclock_limit(struct intel_hdmi *hdmi, bool respect_dvi_limit)
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index e3e9c98..4a87691 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1437,6 +1437,7 @@ static void intel_disable_sdvo(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_sdvo *intel_sdvo = to_sdvo(encoder);
+ struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
u32 temp;
intel_sdvo_set_active_outputs(intel_sdvo, 0);
@@ -1445,32 +1446,22 @@ static void intel_disable_sdvo(struct intel_encoder *encoder)
DRM_MODE_DPMS_OFF);
temp = I915_READ(intel_sdvo->sdvo_reg);
- if ((temp & SDVO_ENABLE) != 0) {
- /* HW workaround for IBX, we need to move the port to
- * transcoder A before disabling it. */
- if (HAS_PCH_IBX(encoder->base.dev)) {
- struct drm_crtc *crtc = encoder->base.crtc;
- int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1;
-
- if (temp & SDVO_PIPE_B_SELECT) {
- temp &= ~SDVO_PIPE_B_SELECT;
- I915_WRITE(intel_sdvo->sdvo_reg, temp);
- POSTING_READ(intel_sdvo->sdvo_reg);
-
- /* Again we need to write this twice. */
- I915_WRITE(intel_sdvo->sdvo_reg, temp);
- POSTING_READ(intel_sdvo->sdvo_reg);
-
- /* Transcoder selection bits only update
- * effectively on vblank. */
- if (crtc)
- intel_wait_for_vblank(encoder->base.dev, pipe);
- else
- msleep(50);
- }
- }
- intel_sdvo_write_sdvox(intel_sdvo, temp & ~SDVO_ENABLE);
+ temp &= ~SDVO_ENABLE;
+ intel_sdvo_write_sdvox(intel_sdvo, temp);
+
+ /*
+ * HW workaround for IBX, we need to move the port
+ * to transcoder A after disabling it to allow the
+ * matching DP port to be enabled on transcoder A.
+ */
+ if (HAS_PCH_IBX(dev_priv) && crtc->pipe == PIPE_B) {
+ temp &= ~SDVO_PIPE_B_SELECT;
+ temp |= SDVO_ENABLE;
+ intel_sdvo_write_sdvox(intel_sdvo, temp);
+
+ temp &= ~SDVO_ENABLE;
+ intel_sdvo_write_sdvox(intel_sdvo, temp);
}
}
--
2.0.5
More information about the Intel-gfx
mailing list