[Intel-gfx] [PATCH 06/10] drm/i915: Implement the intel_dp_autotest_edid function for DP EDID complaince tests
Daniel Vetter
daniel at ffwll.ch
Thu May 7 00:35:19 PDT 2015
On Mon, May 04, 2015 at 07:48:20AM -0700, Todd Previte wrote:
> Updates the EDID compliance test function to perform the analyze and react to
> the EDID data read as a result of a hot plug event. The results of this
> analysis are handed off to userspace so that the userspace app can set the
> display mode appropriately for the test result/response.
>
> The compliance_test_active flag now appears at the end of the individual
> test handling functions. This is so that the kernel-side operations can
> be completed without the risk of interruption from the userspace app
> that is polling on that flag.
>
> V2:
> - Addressed mailing list feedback
> - Removed excess debug messages
> - Removed extraneous comments
> - Fixed formatting issues (line length > 80)
> - Updated the debug message in compute_edid_checksum to output hex values
> instead of decimal
> V3:
> - Addressed more list feedback
> - Added the test_active flag to the autotest function
> - Removed test_active flag from handler
> - Added failsafe check on the compliance test active flag
> at the end of the test handler
> - Fixed checkpatch.pl issues
> V4:
> - Removed the checksum computation function and its use as it has been
> rendered superfluous by changes to the core DRM EDID functions
> - Updated to use the raw header corruption detection mechanism
> - Moved the declaration of the test_data variable here
> V5:
> - Update test active flag variable name to match the change in the
> first patch of the series.
> - Relocated the test active flag declaration and initialization
> to this patch
> V6:
> - Updated to use the new flag for raw EDID header corruption
> - Removed the extra EDID read from the autotest function
> - Added the edid_checksum variable to struct intel_dp so that the
> autotest function can write it to the sink device
> - Moved the update to the hpd_pulse function to another patch
> - Removed extraneous constants
> V7:
> - Fixed erroneous placement of the checksum assignment. In some cases
> such as when the EDID read fails and is NULL, this causes a NULL ptr
> dereference in the kernel. Bad news. Fixed now.
> V8:
> - Updated to support the kfree() on the EDID data added previously
> V9:
> - Updated for the long_hpd flag propagation
> V10:
> - Updated to use actual checksum from the EDID read that occurs during
> normal hot plug path execution
> - Removed variables from intel_dp struct that are no longer needed
> - Updated the patch subject to more closely match the nature and contents
> of the patch
> - Fixed formatting problem (long line)
> V11:
> - Removed extra debug messages
> - Updated comments to be more informative
> - Removed extra variable
> V12:
> - Removed the 4 bit offset of the resolution setting in compliance data
> - Changed to DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER
>
> Signed-off-by: Todd Previte <tprevite at gmail.com>
> Reviewed-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
Pulled in the remaining patches, thanks. Aside: Something seems to be
amiss in your patch number when you resend. This one here is 6/10 in the
original patch series which has only 5 patches ...
-Daniel
> ---
> drivers/gpu/drm/i915/intel_dp.c | 42 ++++++++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_drv.h | 2 ++
> 2 files changed, 44 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index b249ee8..a59bd75 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -41,6 +41,12 @@
>
> #define DP_LINK_CHECK_TIMEOUT (10 * 1000)
>
> +/* Compliance test status bits */
> +#define INTEL_DP_RESOLUTION_SHIFT_MASK 0
> +#define INTEL_DP_RESOLUTION_PREFERRED (1 << INTEL_DP_RESOLUTION_SHIFT_MASK)
> +#define INTEL_DP_RESOLUTION_STANDARD (2 << INTEL_DP_RESOLUTION_SHIFT_MASK)
> +#define INTEL_DP_RESOLUTION_FAILSAFE (3 << INTEL_DP_RESOLUTION_SHIFT_MASK)
> +
> struct dp_link_dpll {
> int link_bw;
> struct dpll dpll;
> @@ -3994,6 +4000,39 @@ static uint8_t intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
> static uint8_t intel_dp_autotest_edid(struct intel_dp *intel_dp)
> {
> uint8_t test_result = DP_TEST_NAK;
> + struct intel_connector *intel_connector = intel_dp->attached_connector;
> + struct drm_connector *connector = &intel_connector->base;
> +
> + if (intel_connector->detect_edid == NULL ||
> + connector->edid_corrupt == 1 ||
> + intel_dp->aux.i2c_defer_count > 6) {
> + /* Check EDID read for NACKs, DEFERs and corruption
> + * (DP CTS 1.2 Core r1.1)
> + * 4.2.2.4 : Failed EDID read, I2C_NAK
> + * 4.2.2.5 : Failed EDID read, I2C_DEFER
> + * 4.2.2.6 : EDID corruption detected
> + * Use failsafe mode for all cases
> + */
> + if (intel_dp->aux.i2c_nack_count > 0 ||
> + intel_dp->aux.i2c_defer_count > 0)
> + DRM_DEBUG_KMS("EDID read had %d NACKs, %d DEFERs\n",
> + intel_dp->aux.i2c_nack_count,
> + intel_dp->aux.i2c_defer_count);
> + intel_dp->compliance_test_data = INTEL_DP_RESOLUTION_FAILSAFE;
> + } else {
> + if (!drm_dp_dpcd_write(&intel_dp->aux,
> + DP_TEST_EDID_CHECKSUM,
> + &intel_connector->detect_edid->checksum,
> + 1));
> + DRM_DEBUG_KMS("Failed to write EDID checksum\n");
> +
> + test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE;
> + intel_dp->compliance_test_data = INTEL_DP_RESOLUTION_STANDARD;
> + }
> +
> + /* Set test active flag here so userspace doesn't interrupt things */
> + intel_dp->compliance_test_active = 1;
> +
> return test_result;
> }
>
> @@ -4009,7 +4048,10 @@ static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
> uint8_t rxdata = 0;
> int status = 0;
>
> + intel_dp->compliance_test_active = 0;
> intel_dp->compliance_test_type = 0;
> + intel_dp->compliance_test_data = 0;
> +
> intel_dp->aux.i2c_nack_count = 0;
> intel_dp->aux.i2c_defer_count = 0;
>
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index a4675fa..6c71be9 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -742,6 +742,8 @@ struct intel_dp {
>
> /* Displayport compliance testing */
> unsigned long compliance_test_type;
> + unsigned long compliance_test_data;
> + bool compliance_test_active;
> };
>
> struct intel_digital_port {
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Intel-gfx
mailing list