[Intel-gfx] [PATCH 04/42] drm/i915: use intel_crtc_control everywhere
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Mon May 11 07:24:40 PDT 2015
Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 18 ++++++++--
drivers/gpu/drm/i915/intel_display.c | 68 +++++++++++++-----------------------
drivers/gpu/drm/i915/intel_drv.h | 1 -
3 files changed, 39 insertions(+), 48 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index adbbddab42c6..acd4d2c7613a 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -3606,12 +3606,18 @@ static void hsw_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
*/
if (crtc->config->cpu_transcoder == TRANSCODER_EDP &&
!crtc->config->pch_pfit.enabled) {
+ bool active = crtc->active;
+
+ if (active)
+ intel_crtc_control(&crtc->base, false);
+
crtc->config->pch_pfit.force_thru = true;
intel_display_power_get(dev_priv,
POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
- intel_crtc_reset(crtc);
+ if (active)
+ intel_crtc_control(&crtc->base, true);
}
drm_modeset_unlock_all(dev);
}
@@ -3630,12 +3636,18 @@ static void hsw_undo_trans_edp_pipe_A_crc_wa(struct drm_device *dev)
* routing.
*/
if (crtc->config->pch_pfit.force_thru) {
- crtc->config->pch_pfit.force_thru = false;
+ bool active = crtc->active;
- intel_crtc_reset(crtc);
+ if (active)
+ intel_crtc_control(&crtc->base, false);
+
+ crtc->config->pch_pfit.force_thru = false;
intel_display_power_put(dev_priv,
POWER_DOMAIN_PIPE_PANEL_FITTER(PIPE_A));
+
+ if (active)
+ intel_crtc_control(&crtc->base, true);
}
drm_modeset_unlock_all(dev);
}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 42d0cc329b37..70269da6a6b8 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3206,22 +3206,8 @@ static void intel_update_primary_planes(struct drm_device *dev)
}
}
-void intel_crtc_reset(struct intel_crtc *crtc)
-{
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-
- if (!crtc->active)
- return;
-
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
- dev_priv->display.crtc_enable(&crtc->base);
- intel_crtc_enable_planes(&crtc->base);
-}
-
void intel_prepare_reset(struct drm_device *dev)
{
- struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crtc *crtc;
/* no reset support for gen2 */
@@ -3233,18 +3219,12 @@ void intel_prepare_reset(struct drm_device *dev)
return;
drm_modeset_lock_all(dev);
-
/*
* Disabling the crtcs gracefully seems nicer. Also the
* g33 docs say we should at least disable all the planes.
*/
- for_each_intel_crtc(dev, crtc) {
- if (!crtc->active)
- continue;
-
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
- }
+ for_each_intel_crtc(dev, crtc)
+ intel_crtc_control(&crtc->base, false);
}
void intel_finish_reset(struct drm_device *dev)
@@ -6079,26 +6059,29 @@ void intel_crtc_control(struct drm_crtc *crtc, bool enable)
enum intel_display_power_domain domain;
unsigned long domains;
+ if (enable == intel_crtc->active)
+ return;
+
+ if (enable && !crtc->state->enable)
+ return;
+
+ crtc->state->active = enable;
if (enable) {
- if (!intel_crtc->active) {
- domains = get_crtc_power_domains(crtc);
- for_each_power_domain(domain, domains)
- intel_display_power_get(dev_priv, domain);
- intel_crtc->enabled_power_domains = domains;
-
- dev_priv->display.crtc_enable(crtc);
- intel_crtc_enable_planes(crtc);
- }
+ domains = get_crtc_power_domains(crtc);
+ for_each_power_domain(domain, domains)
+ intel_display_power_get(dev_priv, domain);
+ intel_crtc->enabled_power_domains = domains;
+
+ dev_priv->display.crtc_enable(crtc);
+ intel_crtc_enable_planes(crtc);
} else {
- if (intel_crtc->active) {
- intel_crtc_disable_planes(crtc);
- dev_priv->display.crtc_disable(crtc);
-
- domains = intel_crtc->enabled_power_domains;
- for_each_power_domain(domain, domains)
- intel_display_power_put(dev_priv, domain);
- intel_crtc->enabled_power_domains = 0;
- }
+ intel_crtc_disable_planes(crtc);
+ dev_priv->display.crtc_disable(crtc);
+
+ domains = intel_crtc->enabled_power_domains;
+ for_each_power_domain(domain, domains)
+ intel_display_power_put(dev_priv, domain);
+ intel_crtc->enabled_power_domains = 0;
}
}
@@ -6115,8 +6098,6 @@ void intel_crtc_update_dpms(struct drm_crtc *crtc)
enable |= intel_encoder->connectors_active;
intel_crtc_control(crtc, enable);
-
- crtc->state->active = enable;
}
void intel_encoder_destroy(struct drm_encoder *encoder)
@@ -14543,8 +14524,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
plane = crtc->plane;
to_intel_plane_state(crtc->base.primary->state)->visible = true;
crtc->plane = !plane;
- intel_crtc_disable_planes(&crtc->base);
- dev_priv->display.crtc_disable(&crtc->base);
+ intel_crtc_control(&crtc->base, false);
crtc->plane = plane;
/* ... and break all links. */
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 4c690403942c..7390fe9ba97d 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -993,7 +993,6 @@ void intel_mark_busy(struct drm_device *dev);
void intel_mark_idle(struct drm_device *dev);
void intel_crtc_restore_mode(struct drm_crtc *crtc);
void intel_crtc_control(struct drm_crtc *crtc, bool enable);
-void intel_crtc_reset(struct intel_crtc *crtc);
void intel_crtc_update_dpms(struct drm_crtc *crtc);
void intel_encoder_destroy(struct drm_encoder *encoder);
int intel_connector_init(struct intel_connector *);
--
2.1.0
More information about the Intel-gfx
mailing list