[Intel-gfx] [PATCH 08/42] drm/i915: Implement intel_crtc_toggle using atomic state
Daniel Vetter
daniel at ffwll.ch
Mon May 11 11:12:30 PDT 2015
On Mon, May 11, 2015 at 04:24:44PM +0200, Maarten Lankhorst wrote:
> Assume the function is locked with drm_modeset_lock_all for now.
s/toggle/control/ in the commit message.
And a bit of blabla would be good to explain why we need to make a
mass-replacement of state->enable to state->active here now. And looking
at the enable/active replacement in detail I think we should do this in an
upfront patch first (the state should be consistent already). And have the
reworking of intel_crtc_control in a separate split-out patch.
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_irq.c | 2 +-
> drivers/gpu/drm/i915/intel_display.c | 79 ++++++++++++++++++++++--------------
> 2 files changed, 50 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 9da955e4f355..a6816503a080 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -796,7 +796,7 @@ static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
> return -EINVAL;
> }
>
> - if (!crtc->state->enable) {
> + if (!crtc->state->active) {
> DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
> return -EBUSY;
> }
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 8c2fb951029b..a21b2e51c054 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
One s/state->enable/state->active/ in modeset_update_crtc_power_domains
seems to be missing.
> @@ -4656,7 +4656,7 @@ static void intel_crtc_load_lut(struct drm_crtc *crtc)
> bool reenable_ips = false;
>
> /* The clocks have to be on to load the palette. */
> - if (!crtc->state->enable || !intel_crtc->active)
> + if (!crtc->state->active || !intel_crtc->active)
Replace the check for intel_crtc->active with a WARN_ON?
> return;
>
> if (HAS_GMCH_DISPLAY(dev_priv->dev)) {
> @@ -5767,7 +5767,7 @@ static int valleyview_modeset_global_pipes(struct drm_atomic_state *state)
>
> /* add all active pipes to the state */
> for_each_crtc(state->dev, crtc) {
> - if (!crtc->state->enable)
> + if (!crtc->state->active)
> continue;
>
> crtc_state = drm_atomic_get_crtc_state(state, crtc);
The second state->enable looks a bit funky, imo
if (crtc_state->active)
crtc_state->active_changed
after this patch would make a lot of sense. That way we won't try to frob
pipes which are already off.
> @@ -5865,7 +5865,7 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
> int pipe = intel_crtc->pipe;
> bool is_dsi;
>
> - WARN_ON(!crtc->state->enable);
> + WARN_ON(!crtc->state->active);
You don't update haswell/ironlake_crtc_enable, which is inconsistent.
>
> if (intel_crtc->active)
> return;
> @@ -5943,7 +5943,7 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
> struct intel_encoder *encoder;
> int pipe = intel_crtc->pipe;
>
> - WARN_ON(!crtc->state->enable);
> + WARN_ON(!crtc->state->active);
>
> if (intel_crtc->active)
> return;
intel_connector_check_state should gain a
I915_STATE_WARN(!crtc->state->active,
"crtc not active\n");
imo.
Similar for check_crtc_state:
I915_STATE_WARN(active != crtc->state->active,
"crtc's computed active state doesn't match sw active state "
"(expected %i, found %i)\n", active, crtc->active);
> @@ -6054,10 +6054,13 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
> void intel_crtc_control(struct drm_crtc *crtc, bool enable)
> {
> struct drm_device *dev = crtc->dev;
> - struct drm_i915_private *dev_priv = dev->dev_private;
> + struct drm_mode_config *config = &dev->mode_config;
> + struct drm_modeset_acquire_ctx *ctx = config->acquire_ctx;
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> - enum intel_display_power_domain domain;
> - unsigned long domains;
> + struct intel_crtc_state *pipe_config;
> + struct drm_plane_state *plane_state;
> + struct drm_atomic_state *state;
> + int ret;
>
> if (enable == intel_crtc->active)
> return;
> @@ -6065,24 +6068,40 @@ void intel_crtc_control(struct drm_crtc *crtc, bool enable)
> if (enable && !crtc->state->enable)
> return;
>
> - crtc->state->active = enable;
> - if (enable) {
> - domains = get_crtc_power_domains(crtc);
> - for_each_power_domain(domain, domains)
> - intel_display_power_get(dev_priv, domain);
> - intel_crtc->enabled_power_domains = domains;
> + /* this function should be called with drm_modeset_lock_all for now */
> + if (WARN_ON(!ctx))
> + return;
> + lockdep_assert_held(&ctx->ww_ctx);
>
> - dev_priv->display.crtc_enable(crtc);
> - intel_crtc_enable_planes(crtc);
> - } else {
> - intel_crtc_disable_planes(crtc);
> - dev_priv->display.crtc_disable(crtc);
> + state = drm_atomic_state_alloc(dev);
> + if (WARN_ON(!state))
> + return;
>
> - domains = intel_crtc->enabled_power_domains;
> - for_each_power_domain(domain, domains)
> - intel_display_power_put(dev_priv, domain);
> - intel_crtc->enabled_power_domains = 0;
> + state->acquire_ctx = ctx;
> + state->allow_modeset = true;
> +
> + pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
> + if (IS_ERR(pipe_config)) {
> + ret = PTR_ERR(pipe_config);
> + goto err;
> }
> + pipe_config->base.active = enable;
> +
> + plane_state = drm_atomic_get_plane_state(state, crtc->primary);
> + if (IS_ERR(plane_state)) {
> + ret = PTR_ERR(plane_state);
> + goto err;
> + }
> +
> + ret = intel_set_mode(crtc, state);
> + if (!ret)
> + return;
> +
> + DRM_ERROR("Failed to toggle crtc!\n");
> +
> +err:
> + DRM_ERROR("Updating crtc active failed with %i\n", ret);
> + drm_atomic_state_free(state);
> }
>
> /**
> @@ -6158,7 +6177,7 @@ static void intel_connector_check_state(struct intel_connector *connector)
>
> crtc = encoder->base.crtc;
>
> - I915_STATE_WARN(!crtc->state->enable,
> + I915_STATE_WARN(!crtc->state->active,
> "crtc not enabled\n");
> I915_STATE_WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
> I915_STATE_WARN(pipe != to_intel_crtc(crtc)->pipe,
> @@ -11554,7 +11573,7 @@ intel_modeset_update_state(struct drm_atomic_state *state)
> if (!crtc_state || !needs_modeset(crtc->state))
> continue;
>
> - if (crtc->state->enable) {
> + if (crtc->state->active) {
> struct drm_property *dpms_property =
> dev->mode_config.dpms_property;
>
> @@ -12018,7 +12037,7 @@ check_shared_dpll_state(struct drm_device *dev)
> pll->on, active);
>
> for_each_intel_crtc(dev, crtc) {
> - if (crtc->base.state->enable && intel_crtc_to_shared_dpll(crtc) == pll)
> + if (crtc->base.state->active && intel_crtc_to_shared_dpll(crtc) == pll)
> enabled_crtcs++;
> if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
> active_crtcs++;
> @@ -12185,7 +12204,7 @@ static int __intel_set_mode_setup_plls(struct drm_atomic_state *state)
> goto done;
>
> for_each_crtc_in_state(state, crtc, crtc_state, i) {
> - if (!needs_modeset(crtc_state) || !crtc_state->enable)
> + if (!needs_modeset(crtc_state) || !crtc_state->active)
> continue;
>
> intel_crtc = to_intel_crtc(crtc);
> @@ -12265,7 +12284,7 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
> * pipes; here we assume a single modeset_pipe and only track the
> * single crtc and mode.
> */
> - if (pipe_config->base.enable && needs_modeset(&pipe_config->base)) {
> + if (pipe_config->base.active && needs_modeset(&pipe_config->base)) {
> modeset_crtc->mode = pipe_config->base.mode;
>
> /*
> @@ -12290,7 +12309,7 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
>
> /* Now enable the clocks, plane, pipe, and connectors that we set up. */
> for_each_crtc_in_state(state, crtc, crtc_state, i) {
> - if (!needs_modeset(crtc->state) || !crtc->state->enable)
Why did you drop this needs_modeset check here? Won't this lead to an
enabled pipe getting enabled again, which is troublesome?
> + if (!crtc->state->active)
> continue;
>
> update_scanline_offset(to_intel_crtc(crtc));
__intel_mode_set also seems to have some troublesome use of state->enable.
Or missing checks for state->active maybe, dunno.
> @@ -14516,7 +14535,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
> * have active connectors/encoders. */
> intel_crtc_update_dpms(&crtc->base);
>
> - if (crtc->active != crtc->base.state->enable) {
> + if (crtc->active != crtc->base.state->active) {
> struct intel_encoder *encoder;
>
> /* This can happen either due to bugs in the get_hw_state
> @@ -14665,7 +14684,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev,
>
> crtc->config->quirks |= PIPE_CONFIG_QUIRK_INHERITED_MODE;
>
> - if (crtc->active)
> + if (crtc->base.state->active)
> *crtc_mask |= drm_crtc_index(&crtc->base);
>
> crtc->active = dev_priv->display.get_pipe_config(crtc,
These two hunks look like follow-up or independant work to switch from
intel_crtc->active to state->active. Imo better separate.
Cheers, Daniel
> --
> 2.1.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Intel-gfx
mailing list