[Intel-gfx] [PATCH 1/2] drm/i915: Dump some DPLL fields in pipe config debug

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin at intel.com>

Tried to get the platform split right, please shout if I failed.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 52f9cbc..b3ed8a0 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -11418,6 +11418,32 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 	DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled);
 	DRM_DEBUG_KMS("double wide: %i\n", pipe_config->double_wide);
 
+	if (IS_BROXTON(dev)) {
+		DRM_DEBUG_KMS("dpll_hw_state: ebb0: 0x%x, pll0: 0x%x, pll1: 0x%x, pll2: 0x%x, pll3: 0x%x, pll6: 0x%x, pll8: 0x%x, pcsdw12: 0x%x\n",
+		      pipe_config->dpll_hw_state.ebb0,
+		      pipe_config->dpll_hw_state.pll0,
+		      pipe_config->dpll_hw_state.pll1,
+		      pipe_config->dpll_hw_state.pll2,
+		      pipe_config->dpll_hw_state.pll3,
+		      pipe_config->dpll_hw_state.pll6,
+		      pipe_config->dpll_hw_state.pll8,
+		      pipe_config->dpll_hw_state.pcsdw12);
+	} else if (IS_SKYLAKE(dev)) {
+		DRM_DEBUG_KMS("dpll_hw_state: ctrl1: 0x%x, cfgcr1: 0x%x, cfgcr2: 0x%x\n",
+		      pipe_config->dpll_hw_state.ctrl1,
+		      pipe_config->dpll_hw_state.cfgcr1,
+		      pipe_config->dpll_hw_state.cfgcr2);
+	} else if (HAS_DDI(dev)) {
+		DRM_DEBUG_KMS("dpll_hw_state: wrpll: 0x%x\n",
+		      pipe_config->dpll_hw_state.wrpll);
+	} else {
+		DRM_DEBUG_KMS("dpll_hw_state: dpll: 0x%x, dpll_md: 0x%x, fp0: 0x%x, dp1: 0x%x\n",
+		      pipe_config->dpll_hw_state.dpll,
+		      pipe_config->dpll_hw_state.dpll_md,
+		      pipe_config->dpll_hw_state.fp0,
+		      pipe_config->dpll_hw_state.fp1);
+	}
+
 	DRM_DEBUG_KMS("planes on this crtc\n");
 	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
 		intel_plane = to_intel_plane(plane);
-- 
2.4.0