[Intel-gfx] [PATCH v3.6 20/22] drm/i915: Calculate haswell plane workaround, v4.

[Maarten Lankhorst]

This needs to be a global check because at the time of crtc checking
not all modesets have to be calculated yet. Use intel_crtc->atomic
because there's no reason to keep it in state.

Changes since v1:
 - Use intel_crtc->atomic as a place to put hsw_workaround_pipe.
 - Make sure quirk only applies to haswell.
 - Use first loop to iterate over newly enabled crtc's only.
   This increases readability.
Changes since v2:
 - Move hsw_workaround_pipe back to crtc_state.
Changes since v3:
 - Return errors from haswell_mode_set_planes_workaround.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 109 +++++++++++++++++++++++++----------
 drivers/gpu/drm/i915/intel_drv.h     |   3 +
 2 files changed, 80 insertions(+), 32 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index de13c1c14c93..f6733a777590 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4867,42 +4867,15 @@ static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
 	return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A;
 }
 
-/*
- * This implements the workaround described in the "notes" section of the mode
- * set sequence documentation. When going from no pipes or single pipe to
- * multiple pipes, and planes are enabled after the pipe, we need to wait at
- * least 2 vblanks on the first pipe before enabling planes on the second pipe.
- */
-static void haswell_mode_set_planes_workaround(struct intel_crtc *crtc)
-{
-	struct drm_device *dev = crtc->base.dev;
-	struct intel_crtc *crtc_it, *other_active_crtc = NULL;
-
-	/* We want to get the other_active_crtc only if there's only 1 other
-	 * active crtc. */
-	for_each_intel_crtc(dev, crtc_it) {
-		if (!crtc_it->active || crtc_it == crtc)
-			continue;
-
-		if (other_active_crtc)
-			return;
-
-		other_active_crtc = crtc_it;
-	}
-	if (!other_active_crtc)
-		return;
-
-	intel_wait_for_vblank(dev, other_active_crtc->pipe);
-	intel_wait_for_vblank(dev, other_active_crtc->pipe);
-}
-
 static void haswell_crtc_enable(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_encoder *encoder;
-	int pipe = intel_crtc->pipe;
+	int pipe = intel_crtc->pipe, hsw_workaround_pipe;
+	struct intel_crtc_state *pipe_config =
+		to_intel_crtc_state(crtc->state);
 
 	if (WARN_ON(intel_crtc->active))
 		return;
@@ -4979,7 +4952,11 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 
 	/* If we change the relative order between pipe/planes enabling, we need
 	 * to change the workaround. */
-	haswell_mode_set_planes_workaround(intel_crtc);
+	hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
+	if (IS_HASWELL(dev) && hsw_workaround_pipe != INVALID_PIPE) {
+		intel_wait_for_vblank(dev, hsw_workaround_pipe);
+		intel_wait_for_vblank(dev, hsw_workaround_pipe);
+	}
 }
 
 static void ironlake_pfit_disable(struct intel_crtc *crtc)
@@ -12169,6 +12146,71 @@ static int __intel_set_mode_setup_plls(struct drm_atomic_state *state)
 	return ret;
 }
 
+/*
+ * This implements the workaround described in the "notes" section of the mode
+ * set sequence documentation. When going from no pipes or single pipe to
+ * multiple pipes, and planes are enabled after the pipe, we need to wait at
+ * least 2 vblanks on the first pipe before enabling planes on the second pipe.
+ */
+static int haswell_mode_set_planes_workaround(struct drm_atomic_state *state)
+{
+	struct drm_crtc_state *crtc_state;
+	struct intel_crtc *intel_crtc;
+	struct drm_crtc *crtc;
+	struct intel_crtc_state *first_crtc_state = NULL;
+	struct intel_crtc_state *other_crtc_state = NULL;
+	enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
+	int i;
+
+	/* look at all crtc's that are going to be enabled in during modeset */
+	for_each_crtc_in_state(state, crtc, crtc_state, i) {
+		intel_crtc = to_intel_crtc(crtc);
+
+		if (!crtc_state->active || !needs_modeset(crtc_state))
+			continue;
+
+		if (first_crtc_state) {
+			other_crtc_state = to_intel_crtc_state(crtc_state);
+			break;
+		} else {
+			first_crtc_state = to_intel_crtc_state(crtc_state);
+			first_pipe = intel_crtc->pipe;
+		}
+	}
+
+	/* No workaround needed? */
+	if (!first_crtc_state)
+		return 0;
+
+	/* w/a possibly needed, check how many crtc's are already enabled. */
+	for_each_intel_crtc(state->dev, intel_crtc) {
+		struct intel_crtc_state *pipe_config;
+
+		pipe_config = intel_atomic_get_crtc_state(state, intel_crtc);
+		if (IS_ERR(pipe_config))
+			return PTR_ERR(pipe_config);
+
+		pipe_config->hsw_workaround_pipe = INVALID_PIPE;
+
+		if (!pipe_config->base.active ||
+		    needs_modeset(&pipe_config->base))
+			continue;
+
+		/* 2 or more enabled crtcs means no need for w/a */
+		if (enabled_pipe != INVALID_PIPE)
+			return 0;
+
+		enabled_pipe = intel_crtc->pipe;
+	}
+
+	if (enabled_pipe != INVALID_PIPE)
+		first_crtc_state->hsw_workaround_pipe = enabled_pipe;
+	else if (other_crtc_state)
+		other_crtc_state->hsw_workaround_pipe = first_pipe;
+
+	return 0;
+}
+
 /* Code that should eventually be part of atomic_check() */
 static int __intel_set_mode_checks(struct drm_atomic_state *state)
 {
@@ -12192,7 +12234,10 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
 	if (ret)
 		return ret;
 
-	return 0;
+	if (IS_HASWELL(dev))
+		ret = haswell_mode_set_planes_workaround(state);
+
+	return ret;
 }
 
 static int
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 665e249ae8bf..d5f38e3d732b 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -443,6 +443,9 @@ struct intel_crtc_state {
 	int pbn;
 
 	struct intel_crtc_scaler_state scaler_state;
+
+	/* w/a for waiting 2 vblanks during crtc enable */
+	enum pipe hsw_workaround_pipe;
 };
 
 struct intel_pipe_wm {
-- 
2.1.0