[Intel-gfx] [PATCH] drm/i915/bxt: edp1.4 Intermediate Freq support

Sonika Jindal sonika.jindal at intel.com
Tue May 26 05:20:13 PDT 2015


BXT supports following intermediate link rates for edp:
2.16GHz, 2.43GHz, 3.24GHz, 4.32GHz.
Adding support for programming the intermediate rates.

v2: Adding clock in bxt_clk_div struct and then look for the entry with
required rate (Ville)
v3: 'clock' has the selected value, no need to use link_bw or rate_select
for selecting pll(Ville)
v4: Make bxt_dp_clk_val const and remove size (Ville)
v5: Rebased
v6: Removed setting of vco while rebasing in v5, adding it back

Signed-off-by: Sonika Jindal <sonika.jindal at intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>(v4)
---
 drivers/gpu/drm/i915/intel_ddi.c |   39 ++++++++++++++++----------------------
 drivers/gpu/drm/i915/intel_dp.c  |    7 ++++++-
 2 files changed, 22 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index cacb07b..2a2518d 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1334,6 +1334,7 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,
 
 /* bxt clock parameters */
 struct bxt_clk_div {
+	int clock;
 	uint32_t p1;
 	uint32_t p2;
 	uint32_t m2_int;
@@ -1343,14 +1344,14 @@ struct bxt_clk_div {
 };
 
 /* pre-calculated values for DP linkrates */
-static struct bxt_clk_div bxt_dp_clk_val[7] = {
-	/* 162 */ {4, 2, 32, 1677722, 1, 1},
-	/* 270 */ {4, 1, 27,       0, 0, 1},
-	/* 540 */ {2, 1, 27,       0, 0, 1},
-	/* 216 */ {3, 2, 32, 1677722, 1, 1},
-	/* 243 */ {4, 1, 24, 1258291, 1, 1},
-	/* 324 */ {4, 1, 32, 1677722, 1, 1},
-	/* 432 */ {3, 1, 32, 1677722, 1, 1}
+static const struct bxt_clk_div bxt_dp_clk_val[] = {
+	{162000, 4, 2, 32, 1677722, 1, 1},
+	{270000, 4, 1, 27,       0, 0, 1},
+	{540000, 2, 1, 27,       0, 0, 1},
+	{216000, 3, 2, 32, 1677722, 1, 1},
+	{243000, 4, 1, 24, 1258291, 1, 1},
+	{324000, 4, 1, 32, 1677722, 1, 1},
+	{432000, 3, 1, 32, 1677722, 1, 1}
 };
 
 static bool
@@ -1390,22 +1391,14 @@ bxt_ddi_pll_select(struct intel_crtc *intel_crtc,
 		vco = best_clock.vco;
 	} else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
 			intel_encoder->type == INTEL_OUTPUT_EDP) {
-		struct drm_encoder *encoder = &intel_encoder->base;
-		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+		int i;
 
-		switch (intel_dp->link_bw) {
-		case DP_LINK_BW_1_62:
-			clk_div = bxt_dp_clk_val[0];
-			break;
-		case DP_LINK_BW_2_7:
-			clk_div = bxt_dp_clk_val[1];
-			break;
-		case DP_LINK_BW_5_4:
-			clk_div = bxt_dp_clk_val[2];
-			break;
-		default:
-			clk_div = bxt_dp_clk_val[0];
-			DRM_ERROR("Unknown link rate\n");
+		clk_div = bxt_dp_clk_val[0];
+		for (i = 0; i < ARRAY_SIZE(bxt_dp_clk_val); ++i) {
+			if (bxt_dp_clk_val[i].clock == clock) {
+				clk_div = bxt_dp_clk_val[i];
+				break;
+			}
 		}
 		vco = clock * 10 / 2 * clk_div.p1 * clk_div.p2;
 	}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index abd442a..bd0f958 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -91,6 +91,8 @@ static const struct dp_link_dpll chv_dpll[] = {
 		{ .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
 };
 
+static const int bxt_rates[] = { 162000, 216000, 243000, 270000,
+				  324000, 432000, 540000 };
 static const int skl_rates[] = { 162000, 216000, 270000,
 				  324000, 432000, 540000 };
 static const int chv_rates[] = { 162000, 202500, 210000, 216000,
@@ -1170,7 +1172,10 @@ intel_dp_sink_rates(struct intel_dp *intel_dp, const int **sink_rates)
 static int
 intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
 {
-	if (IS_SKYLAKE(dev)) {
+	if (IS_BROXTON(dev)) {
+		*source_rates = bxt_rates;
+		return ARRAY_SIZE(bxt_rates);
+	} else if (IS_SKYLAKE(dev)) {
 		*source_rates = skl_rates;
 		return ARRAY_SIZE(skl_rates);
 	} else if (IS_CHERRYVIEW(dev)) {
-- 
1.7.10.4



More information about the Intel-gfx mailing list