[Intel-gfx] [PATCH igt] tests: add kms_frontbuffer_tracking
Paulo Zanoni
przanoni at gmail.com
Tue May 26 06:33:17 PDT 2015
2015-05-26 8:13 GMT-03:00 Thomas Wood <thomas.wood at intel.com>:
> On 25 May 2015 at 22:40, Paulo Zanoni <przanoni at gmail.com> wrote:
>> From: Paulo Zanoni <paulo.r.zanoni at intel.com>
>>
>> This is a new test that should exercise the frontbuffer tracking
>> feature of the Kernel in a number of different ways. We use different
>> drawing methods, we use the primary, cursor and sprite planes, we can
>> test both on single and dual pipes, also on buffers not associated
>> with any CRTCs, etc.
>>
>> We currently have assertions for both FBC and PSR, and we also have a
>> "nop" test mode that should disable both FBC and PSR, and can be
>> used for debugging.
>
> It would be good to have this information in the test as a comment
> somewhere as well as adding a short description for the
> IGT_TEST_DESCRIPTION macro.
Will do.
>
> Also, there are a few suggestions from lib/igt.cocci that might be
> worth implementing.
I'll take a look.
>
>
>>
>> This test is also capable of testing both FBC and PSR even if they are
>> disabled by default on the Kernel: the test knows how to change the
>> i915.ko parameters and then set them back after testing.
>>
>> I am getting a small number of failures when I run this test, which
>> means we have some work to do on the Kernel.
>>
>> I also still have a small list of additional subtests that I plan to
>> add to this test, and those tests are documented on the main function.
>>
>> Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
>> ---
>> tests/.gitignore | 1 +
>> tests/Makefile.sources | 1 +
>> tests/kms_frontbuffer_tracking.c | 1825 ++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 1827 insertions(+)
>> create mode 100644 tests/kms_frontbuffer_tracking.c
>>
>> Some interesting details:
>>
>> On a tree from 2015, May 06, I get 18 failures and 357 successes. The
>> only FBC failures I get are from the MMAP_WC draw method, which is
>> maybe lacking proper frontbuffer tracking support on the Kernel. The
>> other 16 failures are for PSR, most of them with GTT MMAPs.
>>
>> But if I use a tree from 2015, May 25, every single PSR test fails. We
>> need to investigate that. Maybe if I had finished this earlier we
>> would have an automated bisect. This also highlights the importance of
>> testing stuff even when they are disabled by default! I plan to patch
>> the other tests to do the same thing.
>>
>> I am also seeing some FBC failures that happen right after booting. It
>> seems that the very first tests fail until I run a test that uses the
>> render ring. I'll have to investigate this.
>>
>> I am also seeing some occasional corruptions on my eDP panel, but on
>> these cases both the pipe and sink CRC tests succeed! Maybe this is
>> some weird panel malfunction caused by the fact that we're doing tons
>> and tons of modesets on the panel.
>>
>> diff --git a/tests/.gitignore b/tests/.gitignore
>> index a3f3143..dcead2c 100644
>> --- a/tests/.gitignore
>> +++ b/tests/.gitignore
>> @@ -134,6 +134,7 @@ kms_flip
>> kms_flip_event_leak
>> kms_flip_tiling
>> kms_force_connector
>> +kms_frontbuffer_tracking
>> kms_legacy_colorkey
>> kms_mmio_vs_cs_flip
>> kms_pipe_b_c_ivb
>> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
>> index 994c31b..3c93337 100644
>> --- a/tests/Makefile.sources
>> +++ b/tests/Makefile.sources
>> @@ -66,6 +66,7 @@ TESTS_progs_M = \
>> kms_flip \
>> kms_flip_event_leak \
>> kms_flip_tiling \
>> + kms_frontbuffer_tracking \
>> kms_legacy_colorkey \
>> kms_mmio_vs_cs_flip \
>> kms_pipe_b_c_ivb \
>> diff --git a/tests/kms_frontbuffer_tracking.c b/tests/kms_frontbuffer_tracking.c
>> new file mode 100644
>> index 0000000..f6554f9
>> --- /dev/null
>> +++ b/tests/kms_frontbuffer_tracking.c
>> @@ -0,0 +1,1825 @@
>> +/*
>> + * Copyright © 2015 Intel Corporation
>> + *
>> + * Permission is hereby granted, free of charge, to any person obtaining a
>> + * copy of this software and associated documentation files (the "Software"),
>> + * to deal in the Software without restriction, including without limitation
>> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
>> + * and/or sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice (including the next
>> + * paragraph) shall be included in all copies or substantial portions of the
>> + * Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
>> + * IN THE SOFTWARE.
>> + *
>> + * Authors: Paulo Zanoni <paulo.r.zanoni at intel.com>
>> + *
>> + */
>> +
>> +#include <sys/types.h>
>> +#include <sys/stat.h>
>> +#include <fcntl.h>
>> +
>> +#include "drmtest.h"
>> +#include "igt_aux.h"
>> +#include "igt_draw.h"
>> +#include "igt_kms.h"
>> +#include "igt_debugfs.h"
>> +#include "intel_chipset.h"
>> +#include "ioctl_wrappers.h"
>> +
>> +#define FBC_PARAM_PATH "/sys/module/i915/parameters/enable_fbc"
>> +#define PSR_PARAM_PATH "/sys/module/i915/parameters/enable_psr"
>> +
>> +struct test_mode {
>> + enum {
>> + PIPE_SINGLE = 0,
>> + PIPE_DUAL,
>> + PIPE_COUNT,
>> + } pipes;
>> +
>> + enum {
>> + SCREEN_PRIM = 0,
>> + SCREEN_SCND,
>> + SCREEN_OFFSCREEN,
>> + SCREEN_COUNT,
>> + } screen;
>> +
>> + enum {
>> + PLANE_PRI = 0,
>> + PLANE_CUR,
>> + PLANE_SPR,
>> + PLANE_COUNT,
>> + } plane;
>> +
>> + enum {
>> + FEATURE_NONE = 0,
>> + FEATURE_FBC,
>> + FEATURE_PSR,
>> + FEATURE_COUNT,
>> + } feature;
>> +
>> + enum igt_draw_method method;
>> +};
>> +
>> +enum feature_status {
>> + ENABLED,
>> + DISABLED,
>> +};
>> +
>> +struct rect {
>> + int x;
>> + int y;
>> + int w;
>> + int h;
>> + uint32_t color;
>> +};
>> +
>> +#define MAX_CONNECTORS 32
>> +struct {
>> + int fd;
>> + drmModeResPtr res;
>> + drmModeConnectorPtr connectors[MAX_CONNECTORS];
>> + drmModePlaneResPtr planes;
>> + drm_intel_bufmgr *bufmgr;
>> +} drm;
>> +
>> +struct {
>> + int fd;
>> +
>> + char param_original_value[16];
>> +
>> + bool supports_compressing;
>> + bool supports_last_action;
>> +
>> + struct timespec last_action;
>> +} fbc = {
>> + .fd = -1,
>> + .supports_last_action = false,
>> + .supports_compressing = false,
>> +};
>> +
>> +struct {
>> + int fd;
>> + bool can_test;
>> +
>> + char param_original_value[16];
>> +} psr = {
>> + .fd = -1,
>> + .can_test = false,
>> +};
>> +
>> +
>> +#define SINK_CRC_SIZE 12
>> +typedef struct {
>> + char data[SINK_CRC_SIZE];
>> +} sink_crc_t;
>> +
>> +struct both_crcs {
>> + igt_crc_t pipe;
>> + sink_crc_t sink;
>> +};
>> +
>> +igt_pipe_crc_t *pipe_crc;
>> +struct both_crcs blue_crc;
>> +struct both_crcs *wanted_crc;
>> +
>> +struct {
>> + int fd;
>> +} sink_crc;
>> +
>> +struct draw_pattern_info {
>> + bool initialized;
>> + bool frames_stack;
>> + int n_rects;
>> + struct both_crcs *crcs;
>> + struct rect (*get_rect)(struct igt_fb *fb, int r);
>> +};
>> +
>> +/* Draw big rectangles on the screen. */
>> +struct draw_pattern_info pattern1;
>> +/* 64x64 rectangles at x:0,y:0, just so we can draw on the cursor and sprite. */
>> +struct draw_pattern_info pattern2;
>> +/* 64x64 rectangles at different positions, same color, for the move test. */
>> +struct draw_pattern_info pattern3;
>> +/* Just a fullscreen green square. */
>> +struct draw_pattern_info pattern4;
>> +
>> +/* Command line parameters. */
>> +struct {
>> + bool check_status;
>> + bool check_crc;
>> + bool fbc_check_compression;
>> + bool fbc_check_last_action;
>> + bool no_edp;
>> + bool small_modes;
>> + int step;
>> + int only_feature;
>> + int only_pipes;
>> +} opt = {
>> + .check_status = true,
>> + .check_crc = true,
>> + .fbc_check_compression = true,
>> + .fbc_check_last_action = true,
>> + .no_edp = false,
>> + .small_modes = false,
>> + .step = 0,
>> + .only_feature = FEATURE_COUNT,
>> + .only_pipes = PIPE_COUNT,
>> +};
>> +
>> +struct modeset_params {
>> + uint32_t crtc_id;
>> + uint32_t connector_id;
>> + uint32_t sprite_id;
>> + drmModeModeInfoPtr mode;
>> + struct igt_fb fb;
>> + struct igt_fb cursor;
>> + struct igt_fb sprite;
>> +};
>> +
>> +struct modeset_params prim_mode_params;
>> +struct modeset_params scnd_mode_params;
>> +struct igt_fb offscreen_fb;
>> +
>> +static drmModeModeInfoPtr get_connector_smallest_mode(drmModeConnectorPtr c)
>> +{
>> + int i;
>> + drmModeModeInfoPtr smallest = NULL;
>> +
>> + for (i = 0; i < c->count_modes; i++) {
>> + drmModeModeInfoPtr mode = &c->modes[i];
>> +
>> + if (!smallest)
>> + smallest = mode;
>> +
>> + if (mode->hdisplay * mode->vdisplay <
>> + smallest->hdisplay * smallest->vdisplay)
>> + smallest = mode;
>> + }
>> +
>> + return smallest;
>> +}
>> +
>> +static drmModeConnectorPtr get_connector(uint32_t id)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < drm.res->count_connectors; i++)
>> + if (drm.res->connectors[i] == id)
>> + return drm.connectors[i];
>> +
>> + igt_assert(false);
>
> igt_assert_f() could be used here to provide a more descriptive error message.
This would be a user of the igt_assert_not_reached() you mentioned
below. We should really never reach this assertion.
>
>
>> +}
>> +
>> +static void print_mode_info(const char *screen, struct modeset_params *params)
>> +{
>> + drmModeConnectorPtr c = get_connector(params->connector_id);
>> +
>> + igt_info("%s screen: %s %s\n",
>> + screen,
>> + kmstest_connector_type_str(c->connector_type),
>> + params->mode->name);
>> +}
>> +
>> +static void init_mode_params(struct modeset_params *params, uint32_t crtc_id,
>> + int crtc_index, uint32_t connector_id,
>> + drmModeModeInfoPtr mode)
>> +{
>> + uint32_t plane_id = 0;
>> + int i;
>> +
>> + igt_create_fb(drm.fd, mode->hdisplay, mode->vdisplay,
>> + DRM_FORMAT_XRGB8888, LOCAL_I915_FORMAT_MOD_X_TILED,
>> + ¶ms->fb);
>> + igt_create_fb(drm.fd, 64, 64, DRM_FORMAT_ARGB8888,
>> + LOCAL_DRM_FORMAT_MOD_NONE, ¶ms->cursor);
>> + igt_create_fb(drm.fd, 64, 64, DRM_FORMAT_XRGB8888,
>> + LOCAL_I915_FORMAT_MOD_X_TILED, ¶ms->sprite);
>> +
>> + for (i = 0; i < drm.planes->count_planes && plane_id == 0; i++) {
>> + drmModePlanePtr plane;
>> +
>> + plane = drmModeGetPlane(drm.fd, drm.planes->planes[i]);
>> + igt_assert(plane);
>> +
>> + if (plane->possible_crtcs & (1 << crtc_index))
>> + plane_id = plane->plane_id;
>> +
>> + drmModeFreePlane(plane);
>> + }
>> + igt_assert(plane_id);
>> +
>> + params->crtc_id = crtc_id;
>> + params->connector_id = connector_id;
>> + params->mode = mode;
>> + params->sprite_id = plane_id;
>> +}
>> +
>> +drmModeModeInfo std_1024_mode = {
>> + .clock = 65000,
>> + .hdisplay = 1024,
>> + .hsync_start = 1048,
>> + .hsync_end = 1184,
>> + .htotal = 1344,
>> + .vtotal = 806,
>> + .hskew = 0,
>> + .vdisplay = 768,
>> + .vsync_start = 771,
>> + .vsync_end = 777,
>> + .vtotal = 806,
>> + .vscan = 0,
>> + .vrefresh = 60,
>> + .flags = 0xA,
>> + .type = 0x40,
>> + .name = "Custom 1024x768",
>> +};
>> +
>> +static bool connector_get_mode(drmModeConnectorPtr c, drmModeModeInfoPtr *mode)
>> +{
>> + *mode = NULL;
>> +
>> + if (c->connection != DRM_MODE_CONNECTED || !c->count_modes)
>> + return false;
>> +
>> + if (c->connector_type == DRM_MODE_CONNECTOR_eDP && opt.no_edp)
>> + return false;
>> +
>> + if (opt.small_modes)
>> + *mode = get_connector_smallest_mode(c);
>> + else
>> + *mode = &c->modes[0];
>> +
>> + /* Because on some machines we don't have enough stolen memory to fit in
>> + * those 3k panels. And on HSW the CRC WA is so awful that it makes you
>> + * think everything is bugged. */
>> + if (c->connector_type == DRM_MODE_CONNECTOR_eDP)
>> + *mode = &std_1024_mode;
>> +
>> + return true;
>> +}
>> +
>> +static bool init_modeset_cached_params(void)
>> +{
>> + int i;
>> + uint32_t prim_connector_id = 0, scnd_connector_id = 0;
>> + drmModeModeInfoPtr prim_mode = NULL, scnd_mode = NULL;
>> + drmModeModeInfoPtr tmp_mode;
>> +
>> + /* First, try to find an eDP monitor since it's the only possible type
>> + * for PSR. */
>> + for (i = 0; i < drm.res->count_connectors; i++) {
>> + if (drm.connectors[i]->connector_type != DRM_MODE_CONNECTOR_eDP)
>> + continue;
>> +
>> + if (connector_get_mode(drm.connectors[i], &tmp_mode)) {
>> + prim_connector_id = drm.res->connectors[i];
>> + prim_mode = tmp_mode;
>> + }
>> + }
>> + for (i = 0; i < drm.res->count_connectors; i++) {
>> + /* Don't pick again what we just selected on the above loop. */
>> + if (drm.res->connectors[i] == prim_connector_id)
>> + continue;
>> +
>> + if (connector_get_mode(drm.connectors[i], &tmp_mode)) {
>> + if (!prim_connector_id) {
>> + prim_connector_id = drm.res->connectors[i];
>> + prim_mode = tmp_mode;
>> + } else if (!scnd_connector_id) {
>> + scnd_connector_id = drm.res->connectors[i];
>> + scnd_mode = tmp_mode;
>> + break;
>> + }
>> + }
>> + }
>> +
>> + if (!prim_connector_id)
>> + return false;
>> +
>> + init_mode_params(&prim_mode_params, drm.res->crtcs[0], 0,
>> + prim_connector_id, prim_mode);
>> + print_mode_info("Primary", &prim_mode_params);
>> +
>> + if (!scnd_connector_id) {
>> + scnd_mode_params.connector_id = 0;
>> + return true;
>> + }
>> +
>> + igt_assert(drm.res->count_crtcs >= 2);
>> + init_mode_params(&scnd_mode_params, drm.res->crtcs[1], 1,
>> + scnd_connector_id, scnd_mode);
>> + print_mode_info("Secondary", &scnd_mode_params);
>> +
>> + return true;
>> +}
>> +
>> +static bool set_mode_for_params(struct modeset_params *params)
>> +{
>> + int rc;
>> +
>> + rc = drmModeSetCrtc(drm.fd, params->crtc_id, params->fb.fb_id, 0, 0,
>> + ¶ms->connector_id, 1, params->mode);
>> + return (rc == 0);
>> +}
>> +
>> +#define DEBUGFS_MSG_SIZE 256
>> +
>> +static void get_debugfs_string(int fd, char *buf)
>> +{
>> + ssize_t n_read;
>> +
>> + lseek(fd, 0, SEEK_SET);
>> +
>> + n_read = read(fd, buf, DEBUGFS_MSG_SIZE -1);
>> + igt_assert(n_read >= 0);
>> + buf[n_read] = '\0';
>> +}
>> +
>> +static enum feature_status fbc_get_status(void)
>> +{
>> + char buf[DEBUGFS_MSG_SIZE];
>> +
>> + get_debugfs_string(fbc.fd, buf);
>> +
>> + if (strstr(buf, "FBC enabled\n"))
>> + return ENABLED;
>> + else
>> + return DISABLED;
>> +}
>> +
>> +static enum feature_status psr_get_status(void)
>> +{
>> + char buf[DEBUGFS_MSG_SIZE];
>> +
>> + get_debugfs_string(psr.fd, buf);
>> +
>> + if (strstr(buf, "\nActive: yes\n"))
>> + return ENABLED;
>> + else
>> + return DISABLED;
>> +}
>> +
>> +static struct timespec fbc_get_last_action(void)
>> +{
>> + struct timespec ret = { 0, 0 };
>> + char buf[DEBUGFS_MSG_SIZE];
>> + char *action;
>> + ssize_t n_read;
>> +
>> + get_debugfs_string(fbc.fd, buf);
>> +
>> + action = strstr(buf, "\nLast action:");
>> + igt_assert(action);
>> +
>> + n_read = sscanf(action, "Last action: %ld.%ld",
>> + &ret.tv_sec, &ret.tv_nsec);
>> + igt_assert(n_read == 2);
>> +
>> + return ret;
>> +}
>> +
>> +static bool fbc_last_action_changed(void)
>> +{
>> + struct timespec t_new, t_old;
>> +
>> + t_old = fbc.last_action;
>> + t_new = fbc_get_last_action();
>> +
>> + fbc.last_action = t_new;
>> +
>> +#if 0
>> + igt_info("old: %ld.%ld\n", t_old.tv_sec, t_old.tv_nsec);
>> + igt_info("new: %ld.%ld\n", t_new.tv_sec, t_new.tv_nsec);
>> +#endif
>> +
>> + return t_old.tv_sec != t_new.tv_sec ||
>> + t_old.tv_nsec != t_new.tv_nsec;
>> +}
>> +
>> +static void fbc_update_last_action(void)
>> +{
>> + if (!fbc.supports_last_action)
>> + return;
>> +
>> + fbc.last_action = fbc_get_last_action();
>> +
>> +#if 0
>> + igt_info("Last action: %ld.%ld\n",
>> + fbc.last_action.tv_sec, fbc.last_action.tv_nsec);
>> +#endif
>> +}
>> +
>> +static void fbc_setup_last_action(void)
>> +{
>> + ssize_t n_read;
>> + char buf[DEBUGFS_MSG_SIZE];
>> + char *action;
>> +
>> + get_debugfs_string(fbc.fd, buf);
>> +
>> + action = strstr(buf, "\nLast action:");
>> + if (!action) {
>> + igt_info("FBC last action not supported\n");
>> + return;
>> + }
>> +
>> + fbc.supports_last_action = true;
>> +
>> + n_read = sscanf(action, "Last action: %ld.%ld",
>> + &fbc.last_action.tv_sec, &fbc.last_action.tv_nsec);
>> + igt_assert(n_read == 2);
>> +}
>> +
>> +static bool fbc_is_compressing(void)
>> +{
>> + char buf[DEBUGFS_MSG_SIZE];
>> +
>> + get_debugfs_string(fbc.fd, buf);
>> + return strstr(buf, "\nCompressing: yes\n") != NULL;
>> +}
>> +
>> +static bool fbc_wait_for_compression(void)
>> +{
>> + return igt_wait(fbc_is_compressing(), 5000, 1);
>> +}
>> +
>> +static void fbc_setup_compressing(void)
>> +{
>> + char buf[DEBUGFS_MSG_SIZE];
>> +
>> + get_debugfs_string(fbc.fd, buf);
>> +
>> + if (strstr(buf, "\nCompressing:"))
>> + fbc.supports_compressing = true;
>> + else
>> + igt_info("FBC compression information not supported\n");
>> +}
>> +
>> +static bool fbc_wait_for_status(enum feature_status status)
>> +{
>> + return igt_wait(fbc_get_status() == status, 5000, 1);
>> +}
>> +
>> +static bool psr_wait_for_status(enum feature_status status)
>> +{
>> + return igt_wait(psr_get_status() == status, 5000, 1);
>> +}
>> +
>> +static void set_param(const char *path, bool enable)
>> +{
>> + int fd;
>> + const char *str;
>> +
>> + fd = open(path, O_RDWR);
>> + igt_assert(fd >= 0);
>> +
>> + str = enable ? "1\n" : "0\n";
>> + igt_assert(write(fd, str, 2) == 2);
>> +
>> + igt_assert(close(fd) == 0);
>> +}
>> +#define fbc_enable() set_param(FBC_PARAM_PATH, true)
>> +#define fbc_disable() set_param(FBC_PARAM_PATH, false)
>> +#define psr_enable() set_param(PSR_PARAM_PATH, true)
>> +#define psr_disable() set_param(PSR_PARAM_PATH, false)
>> +
>> +static void save_param(const char *file_path, char *param_value)
>> +{
>> + int fd;
>> + ssize_t n;
>> +
>> + fd = open(file_path, O_RDWR);
>> + igt_assert(fd >= 0);
>> +
>> + n = read(fd, param_value, 15);
>> + igt_assert(n > 0);
>> + param_value[n] = '\0';
>> + igt_assert(close(fd) == 0);
>> +}
>> +
>> +static void get_sink_crc(sink_crc_t *crc)
>> +{
>> + lseek(sink_crc.fd, 0, SEEK_SET);
>> +
>> + igt_assert(read(sink_crc.fd, crc->data, SINK_CRC_SIZE) ==
>> + SINK_CRC_SIZE);
>> +}
>> +
>> +static bool sink_crc_equal(sink_crc_t *a, sink_crc_t *b)
>> +{
>> + return (memcmp(a->data, b->data, SINK_CRC_SIZE) == 0);
>> +}
>> +
>> +#define assert_sink_crc_equal(a, b) igt_assert(sink_crc_equal(a, b))
>> +
>> +static struct rect pat1_get_rect(struct igt_fb *fb, int r)
>> +{
>> + struct rect rect;
>> +
>> + switch (r) {
>> + case 0:
>> + rect.x = 0;
>> + rect.y = 0;
>> + rect.w = fb->width / 8;
>> + rect.h = fb->height / 8;
>> + rect.color = 0x00FF00;
>> + break;
>> + case 1:
>> + rect.x = fb->width / 8;
>> + rect.y = fb->height / 8;
>> + rect.w = fb->width / 8;
>> + rect.h = fb->height / 8;
>> + rect.color = 0xFF0000;
>> + break;
>> + case 2:
>> + rect.x = fb->width / 8 * 4;
>> + rect.y = fb->height / 8 * 4;
>> + rect.w = fb->width / 8 * 2;
>> + rect.h = fb->height / 8 * 2;
>> + rect.color = 0xFF00FF;
>> + break;
>> + case 3:
>> + rect.x = fb->width / 16;
>> + rect.y = fb->height / 16;
>> + rect.w = fb->width / 8;
>> + rect.h = fb->height / 8;
>> + rect.color = 0x00FFFF;
>> + break;
>> + case 4:
>> + rect.x = fb->width - 64;
>> + rect.y = fb->height - 64;
>> + rect.w = 64;
>> + rect.h = 64;
>> + rect.color = 0xFFFFFF;
>> + break;
>> + default:
>> + igt_assert(0);
>
> It might be worth adding an igt_assert_not_reached function (or
> similar) for these, which could print a better error message.
Agree. I'd totally use that for my tests.
>
>
>> + }
>> +
>> + return rect;
>> +}
>> +
>> +static struct rect pat2_get_rect(struct igt_fb *fb, int r)
>> +{
>> + struct rect rect;
>> +
>> + rect.x = 0;
>> + rect.y = 0;
>> + rect.w = 64;
>> + rect.h = 64;
>> +
>> + switch (r) {
>> + case 0:
>> + rect.color = 0xFF00FF00;
>> + break;
>> + case 1:
>> + rect.w = 32;
>> + rect.h = 32;
>> + rect.color = 0xFFFF0000;
>> + break;
>> + case 2:
>> + rect.x = 32;
>> + rect.y = 32;
>> + rect.w = 32;
>> + rect.h = 32;
>> + rect.color = 0xFFFF00FF;
>> + break;
>> + case 3:
>> + rect.x = 16;
>> + rect.y = 16;
>> + rect.w = 32;
>> + rect.h = 32;
>> + rect.color = 0xFF00FFFF;
>> + break;
>> + case 4:
>> + rect.color = 0xFFFFFF00;
>> + break;
>> + default:
>> + igt_assert(0);
>> + }
>> +
>> + return rect;
>> +}
>> +
>> +static struct rect pat3_get_rect(struct igt_fb *fb, int r)
>> +{
>> + struct rect rect;
>> +
>> + rect.w = 64;
>> + rect.h = 64;
>> + rect.color = 0xFF00FF00;
>> +
>> + switch (r) {
>> + case 0:
>> + rect.x = 0;
>> + rect.y = 0;
>> + break;
>> + case 1:
>> + rect.x = 64;
>> + rect.y = 64;
>> + break;
>> + case 2:
>> + rect.x = 1;
>> + rect.y = 1;
>> + break;
>> + case 3:
>> + rect.x = fb->width - 64;
>> + rect.y = fb->height - 64;
>> + break;
>> + case 4:
>> + rect.x = fb->width / 2 - 32;
>> + rect.y = fb->height / 2 - 32;
>> + break;
>> + default:
>> + igt_assert(0);
>> + }
>> +
>> + return rect;
>> +}
>> +
>> +static struct rect pat4_get_rect(struct igt_fb *fb, int r)
>> +{
>> + struct rect rect;
>> +
>> + igt_assert(r == 0);
>> +
>> + rect.x = 0;
>> + rect.y = 0;
>> + rect.w = fb->width;
>> + rect.h = fb->height;
>> + rect.color = 0xFF00FF00;
>> +
>> + return rect;
>> +}
>> +
>> +static void draw_rect(struct draw_pattern_info *pattern, struct igt_fb *fb,
>> + enum igt_draw_method method, int r)
>> +{
>> + struct rect rect = pattern->get_rect(fb, r);
>> +
>> + igt_draw_rect_fb(drm.fd, drm.bufmgr, NULL, fb, method, rect.x, rect.y,
>> + rect.w, rect.h, rect.color);
>> +}
>> +
>> +static void unset_all_crtcs(void)
>> +{
>> + int i, rc;
>> +
>> + for (i = 0; i < drm.res->count_crtcs; i++) {
>> + rc = drmModeSetCrtc(drm.fd, drm.res->crtcs[i], -1, 0, 0, NULL,
>> + 0, NULL);
>> + igt_assert(rc == 0);
>> +
>> + rc = drmModeSetCursor(drm.fd, drm.res->crtcs[i], 0, 0, 0);
>> + igt_assert(rc == 0);
>> + }
>> +
>> + for (i = 0; i < drm.planes->count_planes; i++) {
>> + rc = drmModeSetPlane(drm.fd, drm.planes->planes[i], 0, 0, 0, 0,
>> + 0, 0, 0, 0, 0, 0, 0);
>> + igt_assert(rc == 0);
>> + }
>> +}
>> +
>> +static void disable_features(void)
>> +{
>> + fbc_disable();
>> + psr_disable();
>> +}
>> +
>> +static void print_crc(const char *str, struct both_crcs *crc)
>> +{
>> + int i;
>> + char *pipe_str;
>> +
>> + pipe_str = igt_crc_to_string(&crc->pipe);
>> +
>> + igt_debug("%s pipe:[%s] sink:[", str, pipe_str);
>> + for (i = 0; i < SINK_CRC_SIZE; i++)
>> + igt_debug("%c", crc->sink.data[i]);
>> + igt_debug("]\n");
>> +
>> + free(pipe_str);
>> +}
>> +
>> +static void collect_crcs(struct both_crcs *crcs)
>> +{
>> + drmModeConnectorPtr c;
>> +
>> + igt_pipe_crc_collect_crc(pipe_crc, &crcs->pipe);
>> +
>> + c = get_connector(prim_mode_params.connector_id);
>> + if (c->connector_type == DRM_MODE_CONNECTOR_eDP)
>> + get_sink_crc(&crcs->sink);
>> + else
>> + memcpy(&crcs->sink, "unsupported!", SINK_CRC_SIZE);
>> +}
>> +
>> +static void init_blue_crc(void)
>> +{
>> + struct igt_fb blue;
>> + int rc;
>> +
>> + disable_features();
>> + unset_all_crtcs();
>> +
>> + igt_create_fb(drm.fd, prim_mode_params.mode->hdisplay,
>> + prim_mode_params.mode->vdisplay, DRM_FORMAT_XRGB8888,
>> + LOCAL_I915_FORMAT_MOD_X_TILED, &blue);
>> +
>> + igt_draw_fill_fb(drm.fd, &blue, 0xFF);
>> +
>> + rc = drmModeSetCrtc(drm.fd, prim_mode_params.crtc_id,
>> + blue.fb_id, 0, 0, &prim_mode_params.connector_id, 1,
>> + prim_mode_params.mode);
>> + igt_assert(rc == 0);
>> + collect_crcs(&blue_crc);
>> +
>> + print_crc("Blue CRC: ", &blue_crc);
>> +
>> + igt_remove_fb(drm.fd, &blue);
>> +}
>> +
>> +static void init_crcs(struct draw_pattern_info *pattern)
>> +{
>> + int r, r_, rc;
>> + struct igt_fb fbs[pattern->n_rects];
>> +
>> + if (pattern->initialized)
>> + return;
>> +
>> + pattern->crcs = calloc(pattern->n_rects, sizeof(*(pattern->crcs)));
>> +
>> + for (r = 0; r < pattern->n_rects; r++)
>> + igt_create_fb(drm.fd, prim_mode_params.mode->hdisplay,
>> + prim_mode_params.mode->vdisplay,
>> + DRM_FORMAT_XRGB8888,
>> + LOCAL_I915_FORMAT_MOD_X_TILED, &fbs[r]);
>> +
>> + for (r = 0; r < pattern->n_rects; r++)
>> + igt_draw_fill_fb(drm.fd, &fbs[r], 0xFF);
>> +
>> + if (pattern->frames_stack) {
>> + for (r = 0; r < pattern->n_rects; r++)
>> + for (r_ = 0; r_ <= r; r_++)
>> + draw_rect(pattern, &fbs[r], IGT_DRAW_PWRITE,
>> + r_);
>> + } else {
>> + for (r = 0; r < pattern->n_rects; r++)
>> + draw_rect(pattern, &fbs[r], IGT_DRAW_PWRITE, r);
>> + }
>> +
>> + for (r = 0; r < pattern->n_rects; r++) {
>> + rc = drmModeSetCrtc(drm.fd, prim_mode_params.crtc_id,
>> + fbs[r].fb_id, 0, 0,
>> + &prim_mode_params.connector_id, 1,
>> + prim_mode_params.mode);
>> + igt_assert(rc == 0);
>> + collect_crcs(&pattern->crcs[r]);
>> + }
>> +
>> + for (r = 0; r < pattern->n_rects; r++) {
>> + igt_debug("Rect %d CRC:", r);
>> + print_crc("", &pattern->crcs[r]);
>> + }
>> +
>> + unset_all_crtcs();
>> +
>> + for (r = 0; r < pattern->n_rects; r++)
>> + igt_remove_fb(drm.fd, &fbs[r]);
>> +
>> + pattern->initialized = true;
>> +}
>> +
>> +static void setup_drm(void)
>> +{
>> + int i;
>> +
>> + drm.fd = drm_open_any_master();
>> + igt_require(drm.fd >= 0);
>
> The file descriptor check is done inside drm_open_any_master.
>
>> +
>> + drm.res = drmModeGetResources(drm.fd);
>> + igt_assert(drm.res->count_connectors <= MAX_CONNECTORS);
>> +
>> + for (i = 0; i < drm.res->count_connectors; i++)
>> + drm.connectors[i] = drmModeGetConnector(drm.fd,
>> + drm.res->connectors[i]);
>> +
>> + drm.planes = drmModeGetPlaneResources(drm.fd);
>> +
>> + drm.bufmgr = drm_intel_bufmgr_gem_init(drm.fd, 4096);
>> + igt_assert(drm.bufmgr);
>> + drm_intel_bufmgr_gem_enable_reuse(drm.bufmgr);
>> +}
>> +
>> +static void teardown_drm(void)
>> +{
>> + int i;
>> +
>> + drm_intel_bufmgr_destroy(drm.bufmgr);
>> +
>> + drmModeFreePlaneResources(drm.planes);
>> +
>> + for (i = 0; i < drm.res->count_connectors; i++)
>> + drmModeFreeConnector(drm.connectors[i]);
>> +
>> + drmModeFreeResources(drm.res);
>> + close(drm.fd);
>> +}
>> +
>> +static void setup_modeset(void)
>> +{
>> + igt_require(init_modeset_cached_params());
>> +
>> + kmstest_set_vt_graphics_mode();
>> +
>> + igt_create_fb(drm.fd, 1024, 1024, DRM_FORMAT_XRGB8888,
>> + LOCAL_I915_FORMAT_MOD_X_TILED, &offscreen_fb);
>> +}
>> +
>> +static void teardown_modeset(void)
>> +{
>> + if (scnd_mode_params.connector_id) {
>> + igt_remove_fb(drm.fd, &scnd_mode_params.fb);
>> + igt_remove_fb(drm.fd, &scnd_mode_params.cursor);
>> + igt_remove_fb(drm.fd, &scnd_mode_params.sprite);
>> + }
>> + igt_remove_fb(drm.fd, &prim_mode_params.fb);
>> + igt_remove_fb(drm.fd, &prim_mode_params.cursor);
>> + igt_remove_fb(drm.fd, &prim_mode_params.sprite);
>> + igt_remove_fb(drm.fd, &offscreen_fb);
>> +}
>> +
>> +static void setup_crcs(void)
>> +{
>> + pipe_crc = igt_pipe_crc_new(0, INTEL_PIPE_CRC_SOURCE_AUTO);
>> +
>> + sink_crc.fd = open("/sys/kernel/debug/dri/0/i915_sink_crc_eDP1",
>> + O_RDONLY);
>
> igt_debugfs_open would take care of ensuring debugfs is mounted and
> the path is correct.
Oh, I see. Will use it.
>
>
>> + igt_assert(sink_crc.fd >= 0);
>> +
>> + init_blue_crc();
>> +
>> + pattern1.initialized = false;
>> + pattern1.frames_stack = true;
>> + pattern1.n_rects = 5;
>> + pattern1.crcs = NULL;
>> + pattern1.get_rect = pat1_get_rect;
>> +
>> + pattern2.initialized = false;
>> + pattern2.frames_stack = true;
>> + pattern2.n_rects = 5;
>> + pattern2.crcs = NULL;
>> + pattern2.get_rect = pat2_get_rect;
>> +
>> + pattern3.initialized = false;
>> + pattern3.frames_stack = false;
>> + pattern3.n_rects = 5;
>> + pattern3.crcs = NULL;
>> + pattern3.get_rect = pat3_get_rect;
>> +
>> + pattern4.initialized = false;
>> + pattern4.frames_stack = false;
>> + pattern4.n_rects = 1;
>> + pattern4.crcs = NULL;
>> + pattern4.get_rect = pat4_get_rect;
>> +}
>> +
>> +static void teardown_crcs(void)
>> +{
>> + if (pattern1.crcs)
>> + free(pattern1.crcs);
>> + if (pattern2.crcs)
>> + free(pattern2.crcs);
>> + if (pattern3.crcs)
>> + free(pattern3.crcs);
>> + if (pattern4.crcs)
>> + free(pattern4.crcs);
>> +
>> + close(sink_crc.fd);
>> +
>> + igt_pipe_crc_free(pipe_crc);
>> +}
>> +
>> +static void restore_param(const char *file_path, char *param_value)
>> +{
>> + int fd;
>> +
>> + fd = open(file_path, O_RDWR);
>> + if (fd >= 0) {
>> + write(fd, param_value, strlen(param_value));
>> + close(fd);
>> + }
>> +}
>> +
>> +static void exit_handler(int sig)
>> +{
>> + restore_param(FBC_PARAM_PATH, fbc.param_original_value);
>> + restore_param(PSR_PARAM_PATH, psr.param_original_value);
>> +}
>> +
>> +static void setup_fbc(void)
>> +{
>> + fbc.fd = open("/sys/kernel/debug/dri/0/i915_fbc_status", O_RDONLY);
>> + igt_assert(fbc.fd >= 0);
>> +
>> + save_param(FBC_PARAM_PATH, fbc.param_original_value);
>> +
>> + fbc_setup_last_action();
>> + fbc_setup_compressing();
>> +}
>> +
>> +static void teardown_fbc(void)
>> +{
>> + if (fbc.fd != -1)
>> + close(fbc.fd);
>> +}
>> +
>> +static bool psr_sink_has_support(void)
>> +{
>> + char buf[DEBUGFS_MSG_SIZE];
>> +
>> + get_debugfs_string(psr.fd, buf);
>> +
>> + return strstr(buf, "Sink_Support: yes\n");
>> +}
>> +
>> +static void setup_psr(void)
>> +{
>> + if (get_connector(prim_mode_params.connector_id)->connector_type !=
>> + DRM_MODE_CONNECTOR_eDP) {
>> + igt_info("Can't test PSR: no usable eDP screen.\n");
>> + return;
>> + }
>> +
>> + psr.fd = open("/sys/kernel/debug/dri/0/i915_edp_psr_status", O_RDONLY);
>> + igt_assert(psr.fd >= 0);
>> +
>> + if (!psr_sink_has_support()) {
>> + igt_info("Can't test PSR: not supported by sink.\n");
>> + return;
>> + }
>> + psr.can_test = true;
>> +
>> + save_param(PSR_PARAM_PATH, psr.param_original_value);
>> +}
>> +
>> +static void teardown_psr(void)
>> +{
>> + if (psr.fd != -1)
>> + close(psr.fd);
>> +}
>> +
>> +static void setup_environment(void)
>> +{
>> + setup_drm();
>> + setup_modeset();
>> +
>> + igt_install_exit_handler(exit_handler);
>> + setup_fbc();
>> + setup_psr();
>> +
>> + setup_crcs();
>> +}
>> +
>> +static void teardown_environment(void)
>> +{
>> + teardown_crcs();
>> + teardown_psr();
>> + teardown_fbc();
>> + teardown_modeset();
>> + teardown_drm();
>> +}
>> +
>> +static void wait_user(void)
>> +{
>> + igt_info("Press enter...\n");
>> + while (getchar() != '\n')
>> + ;
>
> Could this be done with the interactive debug option? (i.e. using
> igt_debug_wait_for_keypress)
What I don't like about igt_debug_wait_for_keypress() is that I
usually ctrl+c the test after I get past the part I want, so I'm left
with a terminal that just doesn't work, so I have to blindly "reset"
the terminal. I'm willing to add 100 lines of code to each test I
write in order to avoid that annoyance.
>
>> +}
>> +
>> +static struct modeset_params *pick_params(const struct test_mode *t)
>> +{
>> + switch (t->screen) {
>> + case SCREEN_PRIM:
>> + return &prim_mode_params;
>> + case SCREEN_SCND:
>> + return &scnd_mode_params;
>> + case SCREEN_OFFSCREEN:
>> + return NULL;
>> + default:
>> + igt_assert(false);
>> + }
>> +}
>> +
>> +static struct igt_fb *pick_target(const struct test_mode *t,
>> + struct modeset_params *params)
>> +{
>> + if (!params)
>> + return &offscreen_fb;
>> +
>> + switch (t->plane) {
>> + case PLANE_PRI:
>> + return ¶ms->fb;
>> + case PLANE_CUR:
>> + return ¶ms->cursor;
>> + case PLANE_SPR:
>> + return ¶ms->sprite;
>> + default:
>> + igt_assert(false);
>> + }
>> +}
>> +
>> +static void do_flush(const struct test_mode *t)
>> +{
>> + struct modeset_params *params = pick_params(t);
>> + struct igt_fb *target = pick_target(t, params);
>> +
>> + gem_set_domain(drm.fd, target->gem_handle, I915_GEM_DOMAIN_GTT, 0);
>> +}
>> +
>> +#define DONT_ASSERT_CRC (1 << 0)
>> +
>> +#define FBC_ASSERT_FLAGS (0xF << 1)
>> +#define ASSERT_FBC_ENABLED (1 << 1)
>> +#define ASSERT_FBC_DISABLED (1 << 2)
>> +#define ASSERT_LAST_ACTION_CHANGED (1 << 3)
>> +#define ASSERT_NO_ACTION_CHANGE (1 << 4)
>> +
>> +#define PSR_ASSERT_FLAGS (3 << 5)
>> +#define ASSERT_PSR_ENABLED (1 << 5)
>> +#define ASSERT_PSR_DISABLED (1 << 6)
>> +
>> +static int adjust_assertion_flags(const struct test_mode *t, int flags)
>> +{
>> + if (!(flags & ASSERT_FBC_DISABLED))
>> + flags |= ASSERT_FBC_ENABLED;
>> + if (!(flags & ASSERT_PSR_DISABLED))
>> + flags |= ASSERT_PSR_ENABLED;
>> +
>> + if (t->feature != FEATURE_FBC)
>> + flags &= ~FBC_ASSERT_FLAGS;
>> + if (t->feature != FEATURE_PSR)
>> + flags &= ~PSR_ASSERT_FLAGS;
>> +
>> + return flags;
>> +}
>> +
>> +#define do_crc_assertions(flags) do { \
>> + int flags__ = (flags); \
>> + struct both_crcs crc_; \
>> + \
>> + if (!opt.check_crc || (flags__ & DONT_ASSERT_CRC)) \
>> + break; \
>> + \
>> + collect_crcs(&crc_); \
>> + print_crc("Calculated CRC:", &crc_); \
>> + \
>> + igt_assert(wanted_crc); \
>> + igt_assert_crc_equal(&crc_.pipe, &wanted_crc->pipe); \
>> + assert_sink_crc_equal(&crc_.sink, &wanted_crc->sink); \
>> +} while (0)
>> +
>> +#define do_assertions(flags) do { \
>
> Could this be a function rather than a macro to make debugging easier?
Nooooooo. Macros give me a correct line number when igt_assert()
fails, while functions would always give me the same line number for
every assertion in the code. I know we print the backtrace, but I
don't get line numbers from the backtraces either, so they're not very
useful. By the way, I have the same complaint about
igt_assert_crc_equal(): can we please revert it back to a macro?
>
>
>> + int flags_ = adjust_assertion_flags(t, (flags)); \
>> + \
>> + if (opt.step > 1) \
>> + wait_user(); \
>> + \
>> + /* Check the CRC to make sure the drawing operations work \
>> + * immediately, independently of the features being enabled */ \
>> + do_crc_assertions(flags_); \
>> + \
>> + /* Now we can flush things to make the test faster. */ \
>> + do_flush(t); \
>> + \
>> + if (opt.check_status) { \
>> + if (flags_ & ASSERT_FBC_ENABLED) { \
>> + igt_assert(fbc_wait_for_status(ENABLED)); \
>> + \
>> + if (fbc.supports_compressing && \
>> + opt.fbc_check_compression) \
>> + igt_assert(fbc_wait_for_compression()); \
>> + } else if (flags_ & ASSERT_FBC_DISABLED) { \
>> + igt_assert(fbc_wait_for_status(DISABLED)); \
>> + } \
>> + \
>> + if (flags_ & ASSERT_PSR_ENABLED) \
>> + igt_assert(psr_wait_for_status(ENABLED)); \
>> + else if (flags_ & ASSERT_PSR_DISABLED) \
>> + igt_assert(psr_wait_for_status(DISABLED)); \
>> + } else { \
>> + /* Make sure we settle before continuing. */ \
>> + sleep(1); \
>> + } \
>> + \
>> + /* Check CRC again to make sure the compressed screen is ok. */ \
>> + do_crc_assertions(flags_); \
>> + \
>> + if (fbc.supports_last_action && opt.fbc_check_last_action) { \
>> + if (flags_ & ASSERT_LAST_ACTION_CHANGED) \
>> + igt_assert(fbc_last_action_changed()); \
>> + else if (flags_ & ASSERT_NO_ACTION_CHANGE) \
>> + igt_assert(!fbc_last_action_changed()); \
>> + } \
>> + \
>> + if (opt.step) \
>> + wait_user(); \
>> +} while (0)
>> +
>> +static void enable_prim_screen_and_wait(const struct test_mode *t)
>> +{
>> + igt_draw_fill_fb(drm.fd, &prim_mode_params.fb, 0xFF);
>> + set_mode_for_params(&prim_mode_params);
>> +
>> + wanted_crc = &blue_crc;
>> + fbc_update_last_action();
>> +
>> + do_assertions(ASSERT_NO_ACTION_CHANGE);
>> +}
>> +
>> +static void enable_scnd_screen_and_wait(const struct test_mode *t)
>> +{
>> + igt_draw_fill_fb(drm.fd, &scnd_mode_params.fb, 0x80);
>> + set_mode_for_params(&scnd_mode_params);
>> + do_assertions(ASSERT_NO_ACTION_CHANGE);
>> +}
>> +
>> +static void set_cursor_for_test(const struct test_mode *t,
>> + struct modeset_params *params)
>> +{
>> + int rc;
>> +
>> + igt_draw_fill_fb(drm.fd, ¶ms->cursor, 0xFF0000FF);
>> +
>> + rc = drmModeMoveCursor(drm.fd, params->crtc_id, 0, 0);
>> + igt_assert(rc == 0);
>> +
>> + rc = drmModeSetCursor(drm.fd, params->crtc_id,
>> + params->cursor.gem_handle, params->cursor.width,
>> + params->cursor.height);
>> + igt_assert(rc == 0);
>> +
>> + do_assertions(ASSERT_NO_ACTION_CHANGE);
>> +}
>> +
>> +static void set_sprite_for_test(const struct test_mode *t,
>> + struct modeset_params *params)
>> +{
>> + int rc;
>> +
>> + igt_draw_fill_fb(drm.fd, ¶ms->sprite, 0xFF0000FF);
>> +
>> + rc = drmModeSetPlane(drm.fd, params->sprite_id, params->crtc_id,
>> + params->sprite.fb_id, 0, 0, 0,
>> + params->sprite.width, params->sprite.height,
>> + 0, 0, params->sprite.width << 16,
>> + params->sprite.height << 16);
>> + igt_assert(rc == 0);
>> +
>> + do_assertions(ASSERT_NO_ACTION_CHANGE);
>> +}
>> +
>> +static void enable_features_for_test(const struct test_mode *t)
>> +{
>> + switch (t->feature) {
>> + case FEATURE_NONE:
>> + break;
>> + case FEATURE_FBC:
>> + fbc_enable();
>> + break;
>> + case FEATURE_PSR:
>> + psr_enable();
>> + break;
>> + default:
>> + igt_assert(false);
>> + }
>> +}
>> +
>> +static void check_test_requirements(const struct test_mode *t)
>> +{
>> + if (t->pipes == PIPE_DUAL)
>> + igt_require(scnd_mode_params.connector_id);
>
> It might be nice to use igt_require_f on these checks, so that a
> better message is printed if the test skips.
Yeah, that one is going to happen a lot.
>
>
>> +
>> + if (t->feature == FEATURE_PSR)
>> + igt_require(psr.can_test);
>> +
>> + if (opt.only_feature != FEATURE_COUNT)
>> + igt_require(t->feature == opt.only_feature);
>> +
>> + if (opt.only_pipes != PIPE_COUNT)
>> + igt_require(t->pipes == opt.only_pipes);
>> +}
>> +
>> +static void set_screens_for_test(const struct test_mode *t,
>> + struct draw_pattern_info *pattern)
>> +{
>> + check_test_requirements(t);
>> +
>> + if (t->screen == SCREEN_OFFSCREEN)
>> + igt_draw_fill_fb(drm.fd, &offscreen_fb, 0x80);
>> +
>> + disable_features();
>> + unset_all_crtcs();
>> + init_crcs(pattern);
>> + enable_features_for_test(t);
>> +
>> + enable_prim_screen_and_wait(t);
>> + if (t->screen == SCREEN_PRIM) {
>> + if (t->plane == PLANE_CUR)
>> + set_cursor_for_test(t, &prim_mode_params);
>> + if (t->plane == PLANE_SPR)
>> + set_sprite_for_test(t, &prim_mode_params);
>> + }
>> +
>> + if (t->pipes == PIPE_SINGLE)
>> + return;
>> +
>> + enable_scnd_screen_and_wait(t);
>> + if (t->screen == SCREEN_SCND) {
>> + if (t->plane == PLANE_CUR)
>> + set_cursor_for_test(t, &scnd_mode_params);
>> + if (t->plane == PLANE_SPR)
>> + set_sprite_for_test(t, &scnd_mode_params);
>> + }
>> +}
>> +
>> +static void rte_subtest(const struct test_mode *t)
>> +{
>> + check_test_requirements(t);
>> +
>> + disable_features();
>> + enable_features_for_test(t);
>> + unset_all_crtcs();
>> + do_assertions(ASSERT_FBC_DISABLED | ASSERT_PSR_DISABLED |
>> + DONT_ASSERT_CRC);
>> +
>> + enable_prim_screen_and_wait(t);
>> + set_cursor_for_test(t, &prim_mode_params);
>> + set_sprite_for_test(t, &prim_mode_params);
>> +
>> + if (t->pipes == PIPE_SINGLE)
>> + return;
>> +
>> + enable_scnd_screen_and_wait(t);
>> + set_cursor_for_test(t, &scnd_mode_params);
>> + set_sprite_for_test(t, &scnd_mode_params);
>> +}
>> +
>> +static void update_wanted_crc(const struct test_mode *t, struct both_crcs *crc)
>> +{
>> + if (t->screen == SCREEN_PRIM)
>> + wanted_crc = crc;
>> +}
>> +
>> +static void draw_subtest(const struct test_mode *t)
>> +{
>> + int r;
>> + int assertions = 0;
>> + struct draw_pattern_info *pattern;
>> + struct modeset_params *params = pick_params(t);
>> + struct igt_fb *target = pick_target(t, params);
>> +
>> + switch (t->screen) {
>> + case SCREEN_PRIM:
>> + if (t->method != IGT_DRAW_MMAP_GTT && t->plane == PLANE_PRI)
>> + assertions |= ASSERT_LAST_ACTION_CHANGED;
>> + break;
>> + case SCREEN_SCND:
>> + case SCREEN_OFFSCREEN:
>> + assertions |= ASSERT_NO_ACTION_CHANGE;
>> + break;
>> + default:
>> + igt_assert(false);
>> + }
>> +
>> + switch (t->plane) {
>> + case PLANE_PRI:
>> + pattern = &pattern1;
>> + break;
>> + case PLANE_CUR:
>> + case PLANE_SPR:
>> + pattern = &pattern2;
>> + break;
>> + default:
>> + igt_assert(false);
>> + }
>> +
>> + set_screens_for_test(t, pattern);
>> +
>> + for (r = 0; r < pattern->n_rects; r++) {
>> + draw_rect(pattern, target, t->method, r);
>> + update_wanted_crc(t, &pattern->crcs[r]);
>> + do_assertions(assertions);
>> + }
>> +}
>> +
>> +static void flip_subtest(const struct test_mode *t)
>> +{
>> + int r, rc;
>> + int assertions = 0;
>> + struct igt_fb fb2, *target;
>> + struct modeset_params *params = pick_params(t);
>> + struct draw_pattern_info *pattern = &pattern1;
>> + uint32_t bg_color;
>> +
>> + switch (t->screen) {
>> + case SCREEN_PRIM:
>> + assertions |= ASSERT_LAST_ACTION_CHANGED;
>> + bg_color = 0xFF;
>> + break;
>> + case SCREEN_SCND:
>> + assertions |= ASSERT_NO_ACTION_CHANGE;
>> + bg_color = 0x80;
>> + break;
>> + default:
>> + igt_assert(false);
>> + }
>> +
>> + set_screens_for_test(t, pattern);
>> +
>> + igt_create_fb(drm.fd, params->mode->hdisplay, params->mode->vdisplay,
>> + DRM_FORMAT_XRGB8888, LOCAL_I915_FORMAT_MOD_X_TILED, &fb2);
>> + igt_draw_fill_fb(drm.fd, &fb2, bg_color);
>> +
>> + for (r = 0; r < pattern->n_rects; r++) {
>> + target = (r % 2 == 0) ? &fb2 : ¶ms->fb;
>> +
>> + if (r != 0)
>> + draw_rect(pattern, target, t->method, r - 1);
>> + draw_rect(pattern, target, t->method, r);
>> + update_wanted_crc(t, &pattern->crcs[r]);
>> +
>> + rc = drmModePageFlip(drm.fd, params->crtc_id, target->fb_id, 0,
>> + NULL);
>> + igt_assert(rc == 0);
>> +
>> + do_assertions(assertions);
>> + }
>> +
>> + igt_remove_fb(drm.fd, &fb2);
>> +}
>> +
>> +static void move_subtest(const struct test_mode *t)
>> +{
>> + int r, rc;
>> + int assertions = ASSERT_NO_ACTION_CHANGE;
>> + struct modeset_params *params = pick_params(t);
>> + struct draw_pattern_info *pattern = &pattern3;
>> + bool repeat = false;
>> +
>> + set_screens_for_test(t, pattern);
>> +
>> + /* Just paint the right color since we start at 0x0. */
>> + draw_rect(pattern, pick_target(t, params), t->method, 0);
>> + update_wanted_crc(t, &pattern->crcs[0]);
>> +
>> + do_assertions(assertions);
>> +
>> + for (r = 1; r < pattern->n_rects; r++) {
>> + struct rect rect = pattern->get_rect(¶ms->fb, r);
>> +
>> + switch (t->plane) {
>> + case PLANE_CUR:
>> + rc = drmModeMoveCursor(drm.fd, params->crtc_id, rect.x,
>> + rect.y);
>> + igt_assert(rc == 0);
>> + break;
>> + case PLANE_SPR:
>> + rc = drmModeSetPlane(drm.fd, params->sprite_id,
>> + params->crtc_id,
>> + params->sprite.fb_id, 0,
>> + rect.x, rect.y, rect.w,
>> + rect.h, 0, 0, rect.w << 16,
>> + rect.h << 16);
>> + igt_assert(rc == 0);
>> + break;
>> + default:
>> + igt_assert(false);
>> + }
>> + update_wanted_crc(t, &pattern->crcs[r]);
>> +
>> + do_assertions(assertions);
>> +
>> + /* "Move" the last rect to the same position just to make sure
>> + * this works too. */
>> + if (r+1 == pattern->n_rects && !repeat) {
>> + repeat = true;
>> + r--;
>> + }
>> + }
>> +}
>> +
>> +static void onoff_subtest(const struct test_mode *t)
>> +{
>> + int r, rc;
>> + int assertions = ASSERT_NO_ACTION_CHANGE;
>> + struct modeset_params *params = pick_params(t);
>> + struct draw_pattern_info *pattern = &pattern3;
>> +
>> + set_screens_for_test(t, pattern);
>> +
>> + /* Just paint the right color since we start at 0x0. */
>> + draw_rect(pattern, pick_target(t, params), t->method, 0);
>> + update_wanted_crc(t, &pattern->crcs[0]);
>> + do_assertions(assertions);
>> +
>> + for (r = 0; r < 4; r++) {
>> + if (r % 2 == 0) {
>> + switch (t->plane) {
>> + case PLANE_CUR:
>> + rc = drmModeSetCursor(drm.fd, params->crtc_id,
>> + 0, 0, 0);
>> + igt_assert(rc == 0);
>> + break;
>> + case PLANE_SPR:
>> + rc = drmModeSetPlane(drm.fd, params->sprite_id,
>> + 0, 0, 0, 0, 0, 0, 0, 0, 0,
>> + 0, 0);
>> + igt_assert(rc == 0);
>> + break;
>> + default:
>> + igt_assert(false);
>> + }
>> + update_wanted_crc(t, &blue_crc);
>> +
>> + } else {
>> + switch (t->plane) {
>> + case PLANE_CUR:
>> + rc = drmModeSetCursor(drm.fd, params->crtc_id,
>> + params->cursor.gem_handle,
>> + params->cursor.width,
>> + params->cursor.height);
>> + igt_assert(rc == 0);
>> + break;
>> + case PLANE_SPR:
>> + rc = drmModeSetPlane(drm.fd, params->sprite_id,
>> + params->crtc_id,
>> + params->sprite.fb_id, 0,
>> + 0, 0, params->sprite.width,
>> + params->sprite.height, 0,
>> + 0,
>> + params->sprite.width << 16,
>> + params->sprite.height << 16);
>> + igt_assert(rc == 0);
>> + break;
>> + default:
>> + igt_assert(false);
>> + }
>> + update_wanted_crc(t, &pattern->crcs[0]);
>> +
>> + }
>> +
>> + do_assertions(assertions);
>> + }
>> +}
>> +
>> +static void fullscreen_plane_subtest(const struct test_mode *t)
>> +{
>> + struct draw_pattern_info *pattern = &pattern4;
>> + struct igt_fb fullscreen_fb;
>> + struct rect rect;
>> + struct modeset_params *params = pick_params(t);
>> + int assertions;
>> + int rc;
>> +
>> + set_screens_for_test(t, pattern);
>> +
>> + rect = pattern->get_rect(¶ms->fb, 0);
>> + igt_create_fb(drm.fd, rect.w, rect.h, DRM_FORMAT_XRGB8888,
>> + LOCAL_I915_FORMAT_MOD_X_TILED, &fullscreen_fb);
>> + igt_draw_fill_fb(drm.fd, &fullscreen_fb, rect.color);
>> +
>> + rc = drmModeSetPlane(drm.fd, params->sprite_id, params->crtc_id,
>> + fullscreen_fb.fb_id, 0, 0, 0, fullscreen_fb.width,
>> + fullscreen_fb.height, 0, 0,
>> + fullscreen_fb.width << 16,
>> + fullscreen_fb.height << 16);
>> + igt_assert(rc == 0);
>> + update_wanted_crc(t, &pattern->crcs[0]);
>> +
>> + switch (t->screen) {
>> + case SCREEN_PRIM:
>> + assertions = ASSERT_FBC_DISABLED |
>> + ASSERT_LAST_ACTION_CHANGED;
>> + break;
>> + case SCREEN_SCND:
>> + assertions = ASSERT_NO_ACTION_CHANGE;
>> + break;
>> + default:
>> + igt_assert(false);
>> + }
>> + do_assertions(assertions);
>> +
>> + rc = drmModeSetPlane(drm.fd, params->sprite_id, 0, 0, 0, 0, 0, 0, 0, 0,
>> + 0, 0, 0);
>> + igt_assert(rc == 0);
>> +
>> + if (t->screen == SCREEN_PRIM)
>> + assertions = ASSERT_LAST_ACTION_CHANGED;
>> + update_wanted_crc(t, &blue_crc);
>> + do_assertions(assertions);
>> +
>> + igt_remove_fb(drm.fd, &fullscreen_fb);
>> +}
>> +
>> +static int opt_handler(int option, int option_index)
>> +{
>> + switch (option) {
>> + case 's':
>> + opt.check_status = false;
>> + break;
>> + case 'c':
>> + opt.check_crc = false;
>> + break;
>> + case 'o':
>> + opt.fbc_check_compression = false;
>> + break;
>> + case 'a':
>> + opt.fbc_check_last_action = false;
>> + break;
>> + case 'e':
>> + opt.no_edp = true;
>> + break;
>> + case 'm':
>> + opt.small_modes = true;
>> + break;
>> + case 't':
>> + opt.step++;
>> + break;
>> + case 'n':
>> + igt_assert(opt.only_feature == FEATURE_COUNT);
>> + opt.only_feature = FEATURE_NONE;
>> + break;
>> + case 'f':
>> + igt_assert(opt.only_feature == FEATURE_COUNT);
>> + opt.only_feature = FEATURE_FBC;
>> + break;
>> + case 'p':
>> + igt_assert(opt.only_feature == FEATURE_COUNT);
>> + opt.only_feature = FEATURE_PSR;
>> + break;
>> + case '1':
>> + igt_assert(opt.only_pipes == PIPE_COUNT);
>> + opt.only_pipes = PIPE_SINGLE;
>> + break;
>> + case '2':
>> + igt_assert(opt.only_pipes == PIPE_COUNT);
>> + opt.only_pipes = PIPE_DUAL;
>> + break;
>> + default:
>> + igt_assert(false);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +const char *help_str =
>> +" --no-status-check Don't check for enable/disable status\n"
>> +" --no-crc-check Don't check for CRC values\n"
>> +" --no-fbc-compression-check Don't check for the FBC compression status\n"
>> +" --no-fbc-action-check Don't check for the FBC last action\n"
>> +" --no-edp Don't use eDP monitors\n"
>> +" --use-small-modes Use smaller resolutions for the modes\n"
>> +" --step Stop on each step so you can check the screen\n"
>> +" --nop-only Only run the \"nop\" feature subtests\n"
>> +" --fbc-only Only run the \"fbc\" feature subtests\n"
>> +" --psr-only Only run the \"psr\" feature subtests\n"
>> +" --1p-only Only run subtests that use 1 pipe\n"
>> +" --2p-only Only run subtests that use 2 pipes\n";
>> +
>> +static const char *pipes_str(int pipes)
>> +{
>> + switch (pipes) {
>> + case PIPE_SINGLE:
>> + return "1p";
>> + case PIPE_DUAL:
>> + return "2p";
>> + default:
>> + igt_assert(false);
>> + }
>> +}
>> +
>> +static const char *screen_str(int screen)
>> +{
>> + switch (screen) {
>> + case SCREEN_PRIM:
>> + return "primscrn";
>> + case SCREEN_SCND:
>> + return "scndscrn";
>> + case SCREEN_OFFSCREEN:
>> + return "offscren";
>> + default:
>> + igt_assert(false);
>> + }
>> +}
>> +
>> +static const char *plane_str(int plane)
>> +{
>> + switch (plane) {
>> + case PLANE_PRI:
>> + return "pri";
>> + case PLANE_CUR:
>> + return "cur";
>> + case PLANE_SPR:
>> + return "spr";
>> + default:
>> + igt_assert(false);
>> + }
>> +}
>> +
>> +static const char *feature_str(int feature)
>> +{
>> + switch (feature) {
>> + case FEATURE_NONE:
>> + return "nop";
>> + case FEATURE_FBC:
>> + return "fbc";
>> + case FEATURE_PSR:
>> + return "psr";
>> + default:
>> + igt_assert(false);
>> + }
>> +}
>> +
>> +#define TEST_MODE_ITER_BEGIN(t) \
>> + for (t.pipes = 0; t.pipes < PIPE_COUNT; t.pipes++) { \
>> + for (t.screen = 0; t.screen < SCREEN_COUNT; t.screen++) { \
>> + for (t.plane = 0; t.plane < PLANE_COUNT; t.plane++) { \
>> + for (t.method = 0; t.method < IGT_DRAW_METHOD_COUNT; t.method++) { \
>> + for (t.feature = 0; t.feature < FEATURE_COUNT; t.feature++) { \
>> + if (t.pipes == PIPE_SINGLE && t.screen == SCREEN_SCND) \
>> + continue;
>> +
>> +#define TEST_MODE_ITER_END } } } } }
>> +
>> +int main(int argc, char *argv[])
>> +{
>> + struct test_mode t;
>> + struct option long_options[] = {
>> + { "no-status-check", 0, 0, 's'},
>> + { "no-crc-check", 0, 0, 'c'},
>> + { "no-fbc-compression-check", 0, 0, 'o'},
>> + { "no-fbc-action-check", 0, 0, 'a'},
>> + { "no-edp", 0, 0, 'e'},
>> + { "use-small-modes", 0, 0, 'm'},
>> + { "step", 0, 0, 't'},
>> + { "nop-only", 0, 0, 'n'},
>> + { "fbc-only", 0, 0, 'f'},
>> + { "psr-only", 0, 0, 'p'},
>> + { "1p-only", 0, 0, '1'},
>> + { "2p-only", 0, 0, '2'},
>> + { 0, 0, 0, 0 }
>> + };
>> +
>> + igt_subtest_init_parse_opts(&argc, argv, "", long_options, help_str,
>> + opt_handler);
>
> This needs updating for the latest changes as this function and the
> option handler now have a user data pointer.
I'll take a look at the other users.
Thanks for reviewing such a big file!
>
>
>> +
>> + igt_fixture
>> + setup_environment();
>> +
>> + for (t.pipes = 0; t.pipes < PIPE_COUNT; t.pipes++) {
>> + for (t.feature = 0; t.feature < FEATURE_COUNT; t.feature++) {
>> + t.screen = SCREEN_PRIM;
>> + t.plane = PLANE_PRI;
>> + /* Make sure nothing is using this value. */
>> + t.method = -1;
>> +
>> + igt_subtest_f("%s-rte-%s",
>> + pipes_str(t.pipes),
>> + feature_str(t.feature))
>> + rte_subtest(&t);
>> + }
>> + }
>> +
>> + TEST_MODE_ITER_BEGIN(t)
>> + igt_subtest_f("%s-%s-%s-draw-%s-%s",
>> + pipes_str(t.pipes),
>> + screen_str(t.screen),
>> + plane_str(t.plane),
>> + igt_draw_get_method_name(t.method),
>> + feature_str(t.feature))
>> + draw_subtest(&t);
>> + TEST_MODE_ITER_END
>> +
>> +
>> + TEST_MODE_ITER_BEGIN(t)
>> + if (t.plane != PLANE_PRI)
>> + continue;
>> +
>> + if (t.screen == SCREEN_OFFSCREEN)
>> + continue;
>> +
>> + igt_subtest_f("%s-%s-flip-%s-%s",
>> + pipes_str(t.pipes),
>> + screen_str(t.screen),
>> + igt_draw_get_method_name(t.method),
>> + feature_str(t.feature))
>> + flip_subtest(&t);
>> + TEST_MODE_ITER_END
>> +
>> + TEST_MODE_ITER_BEGIN(t)
>> + if (t.screen == SCREEN_OFFSCREEN)
>> + continue;
>> + if (t.method != IGT_DRAW_BLT)
>> + continue;
>> + if (t.plane == PLANE_PRI)
>> + continue;
>> +
>> + igt_subtest_f("%s-%s-%s-move-%s",
>> + pipes_str(t.pipes),
>> + screen_str(t.screen),
>> + plane_str(t.plane),
>> + feature_str(t.feature))
>> + move_subtest(&t);
>> +
>> + igt_subtest_f("%s-%s-%s-onoff-%s",
>> + pipes_str(t.pipes),
>> + screen_str(t.screen),
>> + plane_str(t.plane),
>> + feature_str(t.feature))
>> + onoff_subtest(&t);
>> + TEST_MODE_ITER_END
>> +
>> + TEST_MODE_ITER_BEGIN(t)
>> + if (t.screen == SCREEN_OFFSCREEN)
>> + continue;
>> + if (t.method != IGT_DRAW_BLT)
>> + continue;
>> + if (t.plane != PLANE_SPR)
>> + continue;
>> +
>> + igt_subtest_f("%s-%s-%s-fullscreen-%s",
>> + pipes_str(t.pipes),
>> + screen_str(t.screen),
>> + plane_str(t.plane),
>> + feature_str(t.feature))
>> + fullscreen_plane_subtest(&t);
>> + TEST_MODE_ITER_END
>> +
>> + /*
>> + * TODO: ideas for subtests:
>> + * - Add a new pipe configuration where both pipes can share a big
>> + * framebuffer (instead of each pipe having its own FB). This will
>> + * possibly require some wrapping of struct igt_fb to make the
>> + * implementation easier.
>> + * - Add a test that alternates between different writing methods. Don't
>> + * forget to add the proper domain handling.
>> + * - Add a new enum to struct test_mode that allows us to specify the
>> + * BPP/depth configuration.
>> + */
>> +
>> + igt_fixture
>> + teardown_environment();
>> +
>> + igt_exit();
>> +}
>> --
>> 2.1.4
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Paulo Zanoni
More information about the Intel-gfx
mailing list