[Intel-gfx] [PATCH 15/16] drm/i915: Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset
Michel Thierry
michel.thierry at intel.com
Tue May 26 09:56:33 PDT 2015
On 5/26/2015 4:25 PM, Daniel Vetter wrote:
> On Tue, May 26, 2015 at 03:21:22PM +0100, Michel Thierry wrote:
>> There are some allocations that must be only referenced by 32bit
>> offsets. To limit the chances of having the first 4GB already full,
>> objects not requiring this workaround don't use the first 2 PDPs.
>>
>> User must pass EXEC_OBJECT_NEEDS_32BADDRESS flag to indicate it needs a
>> 32b address.
>>
>> The flag is ignored in 32b PPGTT.
>>
>> Signed-off-by: Michel Thierry <michel.thierry at intel.com>
>> ---
>> drivers/gpu/drm/i915/i915_drv.h | 1 +
>> drivers/gpu/drm/i915/i915_gem.c | 11 +++++++++++
>> drivers/gpu/drm/i915/i915_gem_execbuffer.c | 3 +++
>> include/uapi/drm/i915_drm.h | 3 ++-
>> 4 files changed, 17 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
>> index 32493f0..a06f19c 100644
>> --- a/drivers/gpu/drm/i915/i915_drv.h
>> +++ b/drivers/gpu/drm/i915/i915_drv.h
>> @@ -2714,6 +2714,7 @@ void i915_gem_vma_destroy(struct i915_vma *vma);
>> #define PIN_OFFSET_BIAS (1<<3)
>> #define PIN_USER (1<<4)
>> #define PIN_UPDATE (1<<5)
>> +#define PIN_FULL_RANGE (1<<6)
>> #define PIN_OFFSET_MASK (~4095)
>> int __must_check
>> i915_gem_object_pin(struct drm_i915_gem_object *obj,
>> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
>> index acd928d..a133b7d 100644
>> --- a/drivers/gpu/drm/i915/i915_gem.c
>> +++ b/drivers/gpu/drm/i915/i915_gem.c
>> @@ -3713,6 +3713,17 @@ i915_gem_object_bind_to_vm(struct drm_i915_gem_object *obj,
>> obj->tiling_mode,
>> false);
>> size = flags & PIN_MAPPABLE ? fence_size : obj->base.size;
>> +
>> + /* Wa32bitGeneralStateOffset & Wa32bitInstructionBaseOffset,
>> + * limit address to 4GB-1 for objects requiring this wa; for
>> + * others, start on the 2nd PDP.
>> + */
>> + if (USES_FULL_48BIT_PPGTT(dev)) {
>> + if (flags & PIN_FULL_RANGE)
>> + start += (2ULL << GEN8_PDPE_SHIFT);
>> + else
>> + end = ((4ULL << GEN8_PDPE_SHIFT) - 1);
>> + }
>> }
>>
>> if (alignment == 0)
>> diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
>> index bd0e4bd..3de7f0f 100644
>> --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
>> +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
>> @@ -588,6 +588,9 @@ i915_gem_execbuffer_reserve_vma(struct i915_vma *vma,
>> if (entry->flags & EXEC_OBJECT_NEEDS_GTT)
>> flags |= PIN_GLOBAL;
>>
>> + if (!(entry->flags & EXEC_OBJECT_NEEDS_32BADDRESS))
>> + flags |= PIN_FULL_RANGE;
>> +
>> if (!drm_mm_node_allocated(&vma->node)) {
>> if (entry->flags & __EXEC_OBJECT_NEEDS_MAP)
>> flags |= PIN_GLOBAL | PIN_MAPPABLE;
>> diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h
>> index 4851d66..ebdf6dd 100644
>> --- a/include/uapi/drm/i915_drm.h
>> +++ b/include/uapi/drm/i915_drm.h
>> @@ -680,7 +680,8 @@ struct drm_i915_gem_exec_object2 {
>> #define EXEC_OBJECT_NEEDS_FENCE (1<<0)
>> #define EXEC_OBJECT_NEEDS_GTT (1<<1)
>> #define EXEC_OBJECT_WRITE (1<<2)
>> -#define __EXEC_OBJECT_UNKNOWN_FLAGS -(EXEC_OBJECT_WRITE<<1)
>> +#define EXEC_OBJECT_NEEDS_32BADDRESS (1<<3)
>> +#define __EXEC_OBJECT_UNKNOWN_FLAGS -(EXEC_OBJECT_NEEDS_32BADDRESS<<1)
> This is the wrong way round for existing userspace (and remember, bdw is
> shipping already so we can't opt out of that). Instead the w/a needs to
> allow 32bit+ addresses only if the new bit is set.
>
> Also this needs the usual pile of userspace enabling (libdrm+mesa).
> -Daniel
Hi,
Ok, I'll change it to something like EXEC_OBJECT_SUPPORTS_48BADDRESS.
--Michel
>> __u64 flags;
>>
>> __u64 rsvd1;
>> --
>> 2.4.0
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list