[Intel-gfx] [PATCH 02/29] drm/i915: Remove the magic AUX_CTL is at DP + foo tricks
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Wed Nov 4 13:19:50 PST 2015
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Currently we determine the location of the AUX registers in a confusing
way. First we assume the PCH registers are used always, but then we
override it for everything but HSW/BDW to use DP+0x10. Very confusing.
Let's just make it straightforward and simply add a few functions to
pick the right AUX_CTL based on the DP port.
To deal with VLV/CHV we'll include the display_mmio_offset into the
AUX register defines.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 54 ++++++++---------
drivers/gpu/drm/i915/intel_dp.c | 124 ++++++++++++++++++++++++++++------------
2 files changed, 113 insertions(+), 65 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 8942532..57eec4e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4232,33 +4232,33 @@ enum skl_disp_power_wells {
* is 20 bytes in each direction, hence the 5 fixed
* data registers
*/
-#define DPA_AUX_CH_CTL 0x64010
-#define DPA_AUX_CH_DATA1 0x64014
-#define DPA_AUX_CH_DATA2 0x64018
-#define DPA_AUX_CH_DATA3 0x6401c
-#define DPA_AUX_CH_DATA4 0x64020
-#define DPA_AUX_CH_DATA5 0x64024
-
-#define DPB_AUX_CH_CTL 0x64110
-#define DPB_AUX_CH_DATA1 0x64114
-#define DPB_AUX_CH_DATA2 0x64118
-#define DPB_AUX_CH_DATA3 0x6411c
-#define DPB_AUX_CH_DATA4 0x64120
-#define DPB_AUX_CH_DATA5 0x64124
-
-#define DPC_AUX_CH_CTL 0x64210
-#define DPC_AUX_CH_DATA1 0x64214
-#define DPC_AUX_CH_DATA2 0x64218
-#define DPC_AUX_CH_DATA3 0x6421c
-#define DPC_AUX_CH_DATA4 0x64220
-#define DPC_AUX_CH_DATA5 0x64224
-
-#define DPD_AUX_CH_CTL 0x64310
-#define DPD_AUX_CH_DATA1 0x64314
-#define DPD_AUX_CH_DATA2 0x64318
-#define DPD_AUX_CH_DATA3 0x6431c
-#define DPD_AUX_CH_DATA4 0x64320
-#define DPD_AUX_CH_DATA5 0x64324
+#define DPA_AUX_CH_CTL (dev_priv->info.display_mmio_offset + 0x64010)
+#define DPA_AUX_CH_DATA1 (dev_priv->info.display_mmio_offset + 0x64014)
+#define DPA_AUX_CH_DATA2 (dev_priv->info.display_mmio_offset + 0x64018)
+#define DPA_AUX_CH_DATA3 (dev_priv->info.display_mmio_offset + 0x6401c)
+#define DPA_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64020)
+#define DPA_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64024)
+
+#define DPB_AUX_CH_CTL (dev_priv->info.display_mmio_offset + 0x64110)
+#define DPB_AUX_CH_DATA1 (dev_priv->info.display_mmio_offset + 0x64114)
+#define DPB_AUX_CH_DATA2 (dev_priv->info.display_mmio_offset + 0x64118)
+#define DPB_AUX_CH_DATA3 (dev_priv->info.display_mmio_offset + 0x6411c)
+#define DPB_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64120)
+#define DPB_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64124)
+
+#define DPC_AUX_CH_CTL (dev_priv->info.display_mmio_offset + 0x64210)
+#define DPC_AUX_CH_DATA1 (dev_priv->info.display_mmio_offset + 0x64214)
+#define DPC_AUX_CH_DATA2 (dev_priv->info.display_mmio_offset + 0x64218)
+#define DPC_AUX_CH_DATA3 (dev_priv->info.display_mmio_offset + 0x6421c)
+#define DPC_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64220)
+#define DPC_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64224)
+
+#define DPD_AUX_CH_CTL (dev_priv->info.display_mmio_offset + 0x64310)
+#define DPD_AUX_CH_DATA1 (dev_priv->info.display_mmio_offset + 0x64314)
+#define DPD_AUX_CH_DATA2 (dev_priv->info.display_mmio_offset + 0x64318)
+#define DPD_AUX_CH_DATA3 (dev_priv->info.display_mmio_offset + 0x6431c)
+#define DPD_AUX_CH_DATA4 (dev_priv->info.display_mmio_offset + 0x64320)
+#define DPD_AUX_CH_DATA5 (dev_priv->info.display_mmio_offset + 0x64324)
#define DP_AUX_CH_CTL_SEND_BUSY (1 << 31)
#define DP_AUX_CH_CTL_DONE (1 << 30)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 4655af0..a26995a 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -743,6 +743,7 @@ static uint32_t i9xx_get_aux_send_ctl(struct intel_dp *intel_dp,
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
uint32_t precharge, timeout;
if (IS_GEN6(dev))
@@ -1008,6 +1009,85 @@ intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
return ret;
}
+static uint32_t g4x_aux_ctl_reg(struct drm_i915_private *dev_priv,
+ enum port port)
+{
+ switch (port) {
+ case PORT_B:
+ return DPB_AUX_CH_CTL;
+ case PORT_C:
+ return DPC_AUX_CH_CTL;
+ case PORT_D:
+ return DPD_AUX_CH_CTL;
+ default:
+ MISSING_CASE(port);
+ return DPB_AUX_CH_CTL;
+ }
+}
+
+static uint32_t ilk_aux_ctl_reg(struct drm_i915_private *dev_priv,
+ enum port port)
+{
+ switch (port) {
+ case PORT_A:
+ return DPA_AUX_CH_CTL;
+ case PORT_B:
+ return PCH_DPB_AUX_CH_CTL;
+ case PORT_C:
+ return PCH_DPC_AUX_CH_CTL;
+ case PORT_D:
+ return PCH_DPD_AUX_CH_CTL;
+ default:
+ MISSING_CASE(port);
+ return DPA_AUX_CH_CTL;
+ }
+}
+
+/*
+ * On SKL we don't have Aux for port E so we rely
+ * on VBT to set a proper alternate aux channel.
+ */
+static enum port skl_porte_aux_port(struct drm_i915_private *dev_priv)
+{
+ const struct ddi_vbt_port_info *info =
+ &dev_priv->vbt.ddi_port_info[PORT_E];
+
+ switch (info->alternate_aux_channel) {
+ case DP_AUX_A:
+ return PORT_A;
+ case DP_AUX_B:
+ return PORT_B;
+ case DP_AUX_C:
+ return PORT_C;
+ case DP_AUX_D:
+ return PORT_D;
+ default:
+ MISSING_CASE(info->alternate_aux_channel);
+ return PORT_A;
+ }
+}
+
+static uint32_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv,
+ enum port port)
+{
+ if (port == PORT_E)
+ port = skl_porte_aux_port(dev_priv);
+
+ switch (port) {
+ case PORT_A:
+ return DPA_AUX_CH_CTL;
+ case PORT_B:
+ return DPB_AUX_CH_CTL;
+ case PORT_C:
+ return DPC_AUX_CH_CTL;
+ case PORT_D:
+ return DPD_AUX_CH_CTL;
+ default:
+ MISSING_CASE(port);
+ return DPA_AUX_CH_CTL;
+ }
+}
+
static void
intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
{
@@ -1015,67 +1095,35 @@ intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
enum port port = intel_dig_port->port;
- struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port];
const char *name = NULL;
- uint32_t porte_aux_ctl_reg = DPA_AUX_CH_CTL;
int ret;
- /* On SKL we don't have Aux for port E so we rely on VBT to set
- * a proper alternate aux channel.
- */
- if ((IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) && port == PORT_E) {
- switch (info->alternate_aux_channel) {
- case DP_AUX_B:
- porte_aux_ctl_reg = DPB_AUX_CH_CTL;
- break;
- case DP_AUX_C:
- porte_aux_ctl_reg = DPC_AUX_CH_CTL;
- break;
- case DP_AUX_D:
- porte_aux_ctl_reg = DPD_AUX_CH_CTL;
- break;
- case DP_AUX_A:
- default:
- porte_aux_ctl_reg = DPA_AUX_CH_CTL;
- }
- }
-
switch (port) {
case PORT_A:
- intel_dp->aux_ch_ctl_reg = DPA_AUX_CH_CTL;
name = "DPDDC-A";
break;
case PORT_B:
- intel_dp->aux_ch_ctl_reg = PCH_DPB_AUX_CH_CTL;
name = "DPDDC-B";
break;
case PORT_C:
- intel_dp->aux_ch_ctl_reg = PCH_DPC_AUX_CH_CTL;
name = "DPDDC-C";
break;
case PORT_D:
- intel_dp->aux_ch_ctl_reg = PCH_DPD_AUX_CH_CTL;
name = "DPDDC-D";
break;
case PORT_E:
- intel_dp->aux_ch_ctl_reg = porte_aux_ctl_reg;
name = "DPDDC-E";
break;
default:
BUG();
}
- /*
- * The AUX_CTL register is usually DP_CTL + 0x10.
- *
- * On Haswell and Broadwell though:
- * - Both port A DDI_BUF_CTL and DDI_AUX_CTL are on the CPU
- * - Port B/C/D AUX channels are on the PCH, DDI_BUF_CTL on the CPU
- *
- * Skylake moves AUX_CTL back next to DDI_BUF_CTL, on the CPU.
- */
- if (!IS_HASWELL(dev) && !IS_BROADWELL(dev) && port != PORT_E)
- intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
+ if (INTEL_INFO(dev_priv)->gen >= 9)
+ intel_dp->aux_ch_ctl_reg = skl_aux_ctl_reg(dev_priv, port);
+ else if (HAS_PCH_SPLIT(dev_priv))
+ intel_dp->aux_ch_ctl_reg = ilk_aux_ctl_reg(dev_priv, port);
+ else
+ intel_dp->aux_ch_ctl_reg = g4x_aux_ctl_reg(dev_priv, port);
intel_dp->aux.name = name;
intel_dp->aux.dev = dev->dev;
--
2.4.10
More information about the Intel-gfx
mailing list