[Intel-gfx] [PATCH 08/29] drm/i915: s/PCH_DP_/PORT_/ in intel_trans_dp_port_sel() and move it next to its only user

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h      |  1 -
 drivers/gpu/drm/i915/intel_display.c | 22 +++++++++++++++++++---
 drivers/gpu/drm/i915/intel_dp.c      | 19 -------------------
 3 files changed, 19 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index cf0367a..cfac5c3 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3355,7 +3355,6 @@ extern void intel_set_rps(struct drm_device *dev, u8 val);
 extern void intel_set_memory_cxsr(struct drm_i915_private *dev_priv,
 				  bool enable);
 extern void intel_detect_pch(struct drm_device *dev);
-extern int intel_trans_dp_port_sel(struct drm_crtc *crtc);
 extern int intel_enable_rc6(const struct drm_device *dev);
 
 extern bool i915_semaphore_is_enabled(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7b3cfb6..50d6749 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4086,6 +4086,22 @@ static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
 	}
 }
 
+/* Return which DP Port should be selected for Transcoder DP control */
+static enum port
+intel_trans_dp_port_sel(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct intel_encoder *encoder;
+
+	for_each_encoder_on_crtc(dev, crtc, encoder) {
+		if (encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
+		    encoder->type == INTEL_OUTPUT_EDP)
+			return enc_to_dig_port(&encoder->base)->port;
+	}
+
+	return -1;
+}
+
 /*
  * Enable PCH resources required for PCH ports:
  *   - PCH PLLs
@@ -4162,13 +4178,13 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
 			temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
 
 		switch (intel_trans_dp_port_sel(crtc)) {
-		case PCH_DP_B:
+		case PORT_B:
 			temp |= TRANS_DP_PORT_SEL_B;
 			break;
-		case PCH_DP_C:
+		case PORT_C:
 			temp |= TRANS_DP_PORT_SEL_C;
 			break;
-		case PCH_DP_D:
+		case PORT_D:
 			temp |= TRANS_DP_PORT_SEL_D;
 			break;
 		default:
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 2325c81..74e4dd58 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -5326,25 +5326,6 @@ put_power:
 	return ret;
 }
 
-/* Return which DP Port should be selected for Transcoder DP control */
-int
-intel_trans_dp_port_sel(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct intel_encoder *intel_encoder;
-	struct intel_dp *intel_dp;
-
-	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
-		intel_dp = enc_to_intel_dp(&intel_encoder->base);
-
-		if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
-		    intel_encoder->type == INTEL_OUTPUT_EDP)
-			return intel_dp->output_reg;
-	}
-
-	return -1;
-}
-
 /* check the VBT to see whether the eDP is on another port */
 bool intel_dp_is_edp(struct drm_device *dev, enum port port)
 {
-- 
2.4.10