[Intel-gfx] [PATCH v3 11/12] drm/i915/gen9: Add boot parameter for disabling DC6

[Patrik Jakobsson]

v2: Use _unsafe (Jani)
v3: Allow specifying specific DC-states instead of just DC6 (Imre)

Signed-off-by: Patrik Jakobsson <patrik.jakobsson at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h         |  1 +
 drivers/gpu/drm/i915/i915_params.c      |  6 ++++++
 drivers/gpu/drm/i915/intel_runtime_pm.c | 14 +++++++++++---
 3 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index c0252ef..c85c1ec 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -2639,6 +2639,7 @@ struct i915_params {
 	int panel_use_ssc;
 	int vbt_sdvo_panel_type;
 	int enable_rc6;
+	int enable_dc;
 	int enable_fbc;
 	int enable_ppgtt;
 	int enable_execlists;
diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
index 368df67..ccc15c9 100644
--- a/drivers/gpu/drm/i915/i915_params.c
+++ b/drivers/gpu/drm/i915/i915_params.c
@@ -32,6 +32,7 @@ struct i915_params i915 __read_mostly = {
 	.panel_use_ssc = -1,
 	.vbt_sdvo_panel_type = -1,
 	.enable_rc6 = -1,
+	.enable_dc = -1,
 	.enable_fbc = -1,
 	.enable_execlists = -1,
 	.enable_hangcheck = true,
@@ -79,6 +80,11 @@ MODULE_PARM_DESC(enable_rc6,
 	"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
 	"default: -1 (use per-chip default)");
 
+module_param_named_unsafe(enable_dc, i915.enable_dc, int, 0400);
+MODULE_PARM_DESC(enable_dc,
+	"Enable power-saving display C-states. "
+	"(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6)");
+
 module_param_named_unsafe(enable_fbc, i915.enable_fbc, int, 0600);
 MODULE_PARM_DESC(enable_fbc,
 	"Enable frame buffer compression for power savings "
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index b6ee48e..4d6f777 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -417,6 +417,11 @@ static void gen9_set_dc_state(struct drm_i915_private *dev_priv, uint32_t state)
 
 	WARN_ON_ONCE(state & ~mask);
 
+	if (i915.enable_dc == 0)
+		state = DC_STATE_DISABLE;
+	else if (i915.enable_dc == 1 && state > DC_STATE_EN_UPTO_DC5)
+		state = DC_STATE_EN_UPTO_DC5;
+
 	if (state & DC_STATE_EN_UPTO_DC5_DC6_MASK)
 		gen9_set_dc_state_debugmask_memory_up(dev_priv);
 
@@ -524,7 +529,9 @@ static void assert_can_disable_dc6(struct drm_i915_private *dev_priv)
 static void gen9_disable_dc5_dc6(struct drm_i915_private *dev_priv)
 {
 	assert_can_disable_dc5(dev_priv);
-	assert_can_disable_dc6(dev_priv);
+
+	if (IS_SKYLAKE(dev_priv) && i915.enable_dc != 0 && i915.enable_dc != 1)
+		assert_can_disable_dc6(dev_priv);
 
 	gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
 }
@@ -709,7 +716,7 @@ static void gen9_dc_off_power_well_enable(struct drm_i915_private *dev_priv,
 static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv,
 					  struct i915_power_well *power_well)
 {
-	if (IS_SKYLAKE(dev_priv))
+	if (IS_SKYLAKE(dev_priv) && i915.enable_dc != 0 && i915.enable_dc != 1)
 		skl_enable_dc6(dev_priv);
 	else
 		gen9_enable_dc5(dev_priv);
@@ -721,7 +728,8 @@ static void gen9_dc_off_power_well_sync_hw(struct drm_i915_private *dev_priv,
 	if (power_well->count > 0) {
 		gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
 	} else {
-		if (IS_SKYLAKE(dev_priv))
+		if (IS_SKYLAKE(dev_priv) && i915.enable_dc != 0 &&
+		    i915.enable_dc != 1)
 			gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6);
 		else
 			gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5);
-- 
2.5.0