[Intel-gfx] [PATCH] drm/i915: Splitting intel_dp_detect

[Shubhangi Shrivastava]

This patch moves probing for panel, DPCD read etc to another
function intel_dp_long_pulse, while intel_dp_detect returns
the status as connected or disconnected depending on
whether the edid is available or not.
This change will be required by further patches in the series
to avoid performing multiple DPCD operations and removing
their duplication.

v2: Moved a hunk to next patch of the series.
    Moved intel_dp_unset_edid to out. (Ander)

Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani at intel.com>
Signed-off-by: Shubhangi Shrivastava <shubhangi.shrivastava at intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 52 ++++++++++++++++++++++++++++-------------
 1 file changed, 36 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 8071247..dd2b9da 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4631,9 +4631,10 @@ intel_dp_power_put(struct intel_dp *dp,
 	intel_display_power_put(to_i915(encoder->base.dev), power_domain);
 }
 
-static enum drm_connector_status
-intel_dp_detect(struct drm_connector *connector, bool force)
+static void
+intel_dp_long_pulse(struct intel_connector *intel_connector)
 {
+	struct drm_connector *connector = &intel_connector->base;
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	struct intel_encoder *intel_encoder = &intel_dig_port->base;
@@ -4643,17 +4644,6 @@ intel_dp_detect(struct drm_connector *connector, bool force)
 	bool ret;
 	u8 sink_irq_vector;
 
-	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
-		      connector->base.id, connector->name);
-	intel_dp_unset_edid(intel_dp);
-
-	if (intel_dp->is_mst) {
-		/* MST devices are disconnected from a monitor POV */
-		if (intel_encoder->type != INTEL_OUTPUT_EDP)
-			intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
-		return connector_status_disconnected;
-	}
-
 	power_domain = intel_dp_power_get(intel_dp);
 
 	/* Can't disconnect eDP, but you can close the lid... */
@@ -4670,8 +4660,10 @@ intel_dp_detect(struct drm_connector *connector, bool force)
 
 	ret = intel_dp_probe_mst(intel_dp);
 	if (ret) {
-		/* if we are in MST mode then this connector
-		   won't appear connected or have anything with EDID on it */
+		/*
+		 * if we are in MST mode then this connector
+		 * won't appear connected or have anything with EDID on it
+		 */
 		if (intel_encoder->type != INTEL_OUTPUT_EDP)
 			intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
 		status = connector_status_disconnected;
@@ -4699,8 +4691,36 @@ intel_dp_detect(struct drm_connector *connector, bool force)
 	}
 
 out:
+	if (status != connector_status_connected)
+		intel_dp_unset_edid(intel_dp);
 	intel_dp_power_put(intel_dp, power_domain);
-	return status;
+	return;
+}
+
+static enum drm_connector_status
+intel_dp_detect(struct drm_connector *connector, bool force)
+{
+	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct intel_encoder *intel_encoder = &intel_dig_port->base;
+	struct intel_connector *intel_connector = to_intel_connector(connector);
+
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
+		      connector->base.id, connector->name);
+
+	if (intel_dp->is_mst) {
+		/* MST devices are disconnected from a monitor POV */
+		if (intel_encoder->type != INTEL_OUTPUT_EDP)
+			intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
+		return connector_status_disconnected;
+	}
+
+	intel_dp_long_pulse(intel_dp->attached_connector);
+
+	if (intel_connector->detect_edid)
+		return connector_status_connected;
+	else
+		return connector_status_disconnected;
 }
 
 static void
-- 
2.6.1