[Intel-gfx] [PATCH 3/5] scripts/kernel-doc: Improve Markdown results
Daniel Vetter
daniel.vetter at ffwll.ch
Wed Nov 25 09:07:57 PST 2015
From: Danilo Cesar Lemes de Paula <danilo.cesar at collabora.co.uk>
Using pandoc as the Markdown engine cause some minor side effects as
pandoc includes main <para> tags for almost everything.
Original Markdown support approach removes those main tags, but it caused
some inconsistencies when that tag is not the main one, like:
<something>..</something>
<para>...</para>
As kernel-doc was already including a <para> tag, it causes the presence
of double <para> tags (<para><para>), which is not supported by DocBook
spec.
Html target gets away with it, so it causes no harm, although other
targets might not be so lucky (pdf as example).
We're now delegating the inclusion of the main <para> tag to pandoc
only, as it knows when it's necessary or not.
That behavior causes a corner case, the only situation where we're
certainly that <para> is not needed, which is the <refpurpose> content.
For those cases, we're using a $output_markdown_nopara = 1 control var.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.cesar at collabora.co.uk>
Cc: Randy Dunlap <rdunlap at infradead.org>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Cc: Jonathan Corbet <corbet at lwn.net>
Cc: Herbert Xu <herbert at gondor.apana.org.au>
Cc: Stephan Mueller <smueller at chronox.de>
Cc: Michal Marek <mmarek at suse.cz>
Cc: linux-kernel at vger.kernel.org
Cc: linux-doc at vger.kernel.org
Cc: intel-gfx <intel-gfx at lists.freedesktop.org>
Cc: dri-devel <dri-devel at lists.freedesktop.org>
Cc: Graham Whaley <graham.whaley at linux.intel.com>
---
scripts/kernel-doc | 48 ++++++++++++++++++++++++++++++++++--------------
1 file changed, 34 insertions(+), 14 deletions(-)
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 28737053395a..e01e74f15a22 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -288,6 +288,7 @@ my $use_markdown = 0;
my $verbose = 0;
my $output_mode = "man";
my $output_preformatted = 0;
+my $output_markdown_nopara = 0;
my $no_doc_sections = 0;
my @highlights = @highlights_man;
my $blankline = $blankline_man;
@@ -538,8 +539,11 @@ sub markdown_to_docbook {
close(CHLD_OUT);
close(CHLD_ERR);
- # pandoc insists in adding Main <para></para>, we should remove them.
- $content =~ s:\A\s*<para>\s*\n(.*)\n</para>\Z$:$1:egsm;
+ if ($output_markdown_nopara) {
+ # pandoc insists in adding Main <para></para>, sometimes we
+ # want to remove them.
+ $content =~ s:\A\s*<para>\s*\n(.*)\n</para>\Z$:$1:egsm;
+ }
return $content;
}
@@ -614,7 +618,7 @@ sub output_highlight {
$line =~ s/^\s*//;
}
if ($line eq ""){
- if (! $output_preformatted) {
+ if (! $output_preformatted && ! $use_markdown) {
print $lineprefix, local_unescape($blankline);
}
} else {
@@ -1035,7 +1039,7 @@ sub output_section_xml(%) {
# programlisting is already included by pandoc
print "<programlisting>\n" unless $use_markdown;
$output_preformatted = 1;
- } else {
+ } elsif (! $use_markdown) {
print "<para>\n";
}
output_highlight($args{'sections'}{$section});
@@ -1043,7 +1047,7 @@ sub output_section_xml(%) {
if ($section =~ m/EXAMPLE/i) {
print "</programlisting>\n" unless $use_markdown;
print "</informalexample>\n";
- } else {
+ } elsif (! $use_markdown) {
print "</para>\n";
}
print "</refsect1>\n";
@@ -1075,7 +1079,9 @@ sub output_function_xml(%) {
print " <refname>" . $args{'function'} . "</refname>\n";
print " <refpurpose>\n";
print " ";
+ $output_markdown_nopara = 1;
output_highlight ($args{'purpose'});
+ $output_markdown_nopara = 0;
print " </refpurpose>\n";
print "</refnamediv>\n";
@@ -1113,10 +1119,12 @@ sub output_function_xml(%) {
$parameter_name =~ s/\[.*//;
print " <varlistentry>\n <term><parameter>$parameter</parameter></term>\n";
- print " <listitem>\n <para>\n";
+ print " <listitem>\n";
+ print " <para>\n" unless $use_markdown;
$lineprefix=" ";
output_highlight($args{'parameterdescs'}{$parameter_name});
- print " </para>\n </listitem>\n </varlistentry>\n";
+ print " </para>\n" unless $use_markdown;
+ print " </listitem>\n </varlistentry>\n";
}
print " </variablelist>\n";
} else {
@@ -1152,7 +1160,9 @@ sub output_struct_xml(%) {
print " <refname>" . $args{'type'} . " " . $args{'struct'} . "</refname>\n";
print " <refpurpose>\n";
print " ";
+ $output_markdown_nopara = 1;
output_highlight ($args{'purpose'});
+ $output_markdown_nopara = 0;
print " </refpurpose>\n";
print "</refnamediv>\n";
@@ -1205,9 +1215,11 @@ sub output_struct_xml(%) {
($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
print " <varlistentry>";
print " <term>$parameter</term>\n";
- print " <listitem><para>\n";
+ print " <listitem>\n";
+ print " <para>\n" unless $use_markdown;
output_highlight($args{'parameterdescs'}{$parameter_name});
- print " </para></listitem>\n";
+ print " </para>\n" unless $use_markdown;
+ print " </listitem>\n";
print " </varlistentry>\n";
}
print " </variablelist>\n";
@@ -1246,7 +1258,9 @@ sub output_enum_xml(%) {
print " <refname>enum " . $args{'enum'} . "</refname>\n";
print " <refpurpose>\n";
print " ";
+ $output_markdown_nopara = 1;
output_highlight ($args{'purpose'});
+ $output_markdown_nopara = 0;
print " </refpurpose>\n";
print "</refnamediv>\n";
@@ -1276,9 +1290,11 @@ sub output_enum_xml(%) {
print " <varlistentry>";
print " <term>$parameter</term>\n";
- print " <listitem><para>\n";
+ print " <listitem>\n";
+ print " <para>\n" unless $use_markdown;
output_highlight($args{'parameterdescs'}{$parameter_name});
- print " </para></listitem>\n";
+ print " </para>\n" unless $use_markdown;
+ print " </listitem>\n";
print " </varlistentry>\n";
}
print " </variablelist>\n";
@@ -1344,14 +1360,14 @@ sub output_blockhead_xml(%) {
if ($section =~ m/EXAMPLE/i) {
print "<example><para>\n";
$output_preformatted = 1;
- } else {
+ } elsif (! $use_markdown) {
print "<para>\n";
}
output_highlight($args{'sections'}{$section});
$output_preformatted = 0;
if ($section =~ m/EXAMPLE/i) {
print "</para></example>\n";
- } else {
+ } elsif (! $use_markdown) {
print "</para>";
}
if (!$args{'content-only'}) {
@@ -2721,7 +2737,11 @@ sub process_file($) {
{
if ( $1 eq "" )
{
- $contents .= $blankline;
+ if ($use_markdown) {
+ $contents .= "\n";
+ } else {
+ $contents .= $blankline;
+ }
}
else
{
--
2.5.1
More information about the Intel-gfx
mailing list