[Intel-gfx] [PATCH 11/11] drm/i915: Clean up .get_aux_clock_divider() functions

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Now that the mess with AUX clock divder rounding is sorted out and
we have both cdclk and rawclk cached in dev_priv, we can clean up
the .get_aux_clock_divider() functions a bit.

The main thing here is just calling ilk_get_aux_clock_divider()
from hsw_get_aux_clock_divider() except for the LPT:H special
case.

We could got further and call g4x_get_aux_clock_divider() from
ilk_get_aux_clock_divider() for the PCH ports, but I'm sure Jani
would object, so leave that be.

While at it repeat the comment where the AUX clock comes from
in ilk_get_aux_clock_divider().

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 28 +++++++++++++++-------------
 1 file changed, 15 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 39a1689bac7d..df9fc396d18d 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -677,22 +677,29 @@ static uint32_t g4x_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
 
+	if (index)
+		return 0;
+
 	/*
 	 * The clock divider is based off the hrawclk, and would like to run at
-	 * 2MHz.  So, take the hrawclk value and divide by 2 and use that
+	 * 2MHz.  So, take the hrawclk value and divide by 2000 and use that
 	 */
-	return index ? 0 : DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 2000);
+	return DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 2000);
 }
 
 static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-	struct drm_device *dev = intel_dig_port->base.base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
 
 	if (index)
 		return 0;
 
+	/*
+	 * The clock divider is based off the cdclk or PCH rawclk, and would
+	 * like to run at 2MHz.  So, take the cdclk or PCH rawclk value and
+	 * divide by 2000 and use that
+	 */
 	if (intel_dig_port->port == PORT_A)
 		return DIV_ROUND_CLOSEST(dev_priv->cdclk_freq, 2000);
 	else
@@ -702,23 +709,18 @@ static uint32_t ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 static uint32_t hsw_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
-	struct drm_device *dev = intel_dig_port->base.base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
 
-	if (intel_dig_port->port == PORT_A) {
-		if (index)
-			return 0;
-		return DIV_ROUND_CLOSEST(dev_priv->cdclk_freq, 2000);
-	} else if (HAS_PCH_LPT_H(dev_priv)) {
+	if (intel_dig_port->port != PORT_A && HAS_PCH_LPT_H(dev_priv)) {
 		/* Workaround for non-ULT HSW */
 		switch (index) {
 		case 0: return 63;
 		case 1: return 72;
 		default: return 0;
 		}
-	} else  {
-		return index ? 0 : DIV_ROUND_CLOSEST(dev_priv->rawclk_freq, 2000);
 	}
+
+	return ilk_get_aux_clock_divider(intel_dp, index);
 }
 
 static uint32_t skl_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
-- 
2.4.10