[Intel-gfx] [PATCH 2/2] igt/pm_rps: Add checks for freq = idle (RPn) in specific cases.

[Bob Paauwe]

Now that the frequency can drop below the user specified minimum when
the gpu is idle, add some checking to verify that it really does drop
down to the RPn frequency in specific cases.

To do this, modify the main test flow to take two 'check' routines
instead of one. When running the config-min-max-idle subtest make
use of the second check routine to verify that the frequency drops
to RPn instead of simply <= user min frequency.  For all other
subtests, use the original check routines for both checks.

Signed-off-by: Bob Paauwe <bob.j.paauwe at intel.com>
---
 tests/pm_rps.c | 47 ++++++++++++++++++++++++++++++++++-------------
 1 file changed, 34 insertions(+), 13 deletions(-)

diff --git a/tests/pm_rps.c b/tests/pm_rps.c
index f919625..96225ce 100644
--- a/tests/pm_rps.c
+++ b/tests/pm_rps.c
@@ -364,7 +364,7 @@ static int get_hw_rounded_freq(int target)
 	return ret;
 }
 
-static void min_max_config(void (*check)(void), bool load_gpu)
+static void min_max_config(void (*check)(void), void (*check2)(void), bool load_gpu)
 {
 	int fmid = (origfreqs[RPn] + origfreqs[RP0]) / 2;
 
@@ -384,7 +384,7 @@ static void min_max_config(void (*check)(void), bool load_gpu)
 	writeval(stuff[MAX].filp, origfreqs[RP0]);
 	if (load_gpu)
 		do_load_gpu();
-	check();
+	check2();
 
 	igt_debug("\nIncrease min to midpoint...\n");
 	writeval(stuff[MIN].filp, fmid);
@@ -412,7 +412,7 @@ static void min_max_config(void (*check)(void), bool load_gpu)
 	writeval(stuff[MIN].filp, origfreqs[RPn]);
 	if (load_gpu)
 		do_load_gpu();
-	check();
+	check2();
 
 	igt_debug("\nDecrease min below RPn (invalid)...\n");
 	writeval_inval(stuff[MIN].filp, 0);
@@ -420,11 +420,11 @@ static void min_max_config(void (*check)(void), bool load_gpu)
 
 	igt_debug("\nDecrease max to midpoint...\n");
 	writeval(stuff[MAX].filp, fmid);
-	check();
+	check2();
 
 	igt_debug("\nDecrease max to RPn...\n");
 	writeval(stuff[MAX].filp, origfreqs[RPn]);
-	check();
+	check2();
 
 	igt_debug("\nDecrease max below RPn (invalid)...\n");
 	writeval_inval(stuff[MAX].filp, 0);
@@ -436,11 +436,11 @@ static void min_max_config(void (*check)(void), bool load_gpu)
 
 	igt_debug("\nIncrease max to midpoint...\n");
 	writeval(stuff[MAX].filp, fmid);
-	check();
+	check2();
 
 	igt_debug("\nIncrease max to RP0...\n");
 	writeval(stuff[MAX].filp, origfreqs[RP0]);
-	check();
+	check2();
 
 	igt_debug("\nIncrease max above RP0 (invalid)...\n");
 	writeval_inval(stuff[MAX].filp, origfreqs[RP0] + 1000);
@@ -461,7 +461,7 @@ static void basic_check(void)
 
 #define IDLE_WAIT_TIMESTEP_MSEC 100
 #define IDLE_WAIT_TIMEOUT_MSEC 10000
-static void idle_check(void)
+static void idle_check_min(void)
 {
 	int freqs[NUMFREQ];
 	int wait = 0;
@@ -482,6 +482,27 @@ static void idle_check(void)
 	igt_debug("Required %d msec to reach cur<=min\n", wait);
 }
 
+static void idle_check_idle(void)
+{
+	int freqs[NUMFREQ];
+	int wait = 0;
+
+	/* Monitor frequencies until cur settles down to min, which should
+	 * happen within the allotted time */
+	do {
+		read_freqs(freqs);
+		dump(freqs);
+		checkit(freqs);
+		if (freqs[CUR] == freqs[RPn])
+			break;
+		usleep(1000 * IDLE_WAIT_TIMESTEP_MSEC);
+		wait += IDLE_WAIT_TIMESTEP_MSEC;
+	} while (wait < IDLE_WAIT_TIMEOUT_MSEC);
+
+	igt_assert_eq(freqs[CUR], freqs[RPn]);
+	igt_debug("Required %d msec to reach cur=idle\n", wait);
+}
+
 #define LOADED_WAIT_TIMESTEP_MSEC 100
 #define LOADED_WAIT_TIMEOUT_MSEC 3000
 static void loaded_check(void)
@@ -577,7 +598,7 @@ static void reset(void)
 
 	igt_debug("Removing load...\n");
 	load_helper_stop();
-	idle_check();
+	idle_check_min();
 }
 
 /*
@@ -635,7 +656,7 @@ static void blocking(void)
 	matchit(pre_freqs, post_freqs);
 
 	igt_debug("Removing load...\n");
-	idle_check();
+	idle_check_min();
 }
 
 static void pm_rps_exit_handler(int sig)
@@ -686,14 +707,14 @@ igt_main
 	}
 
 	igt_subtest("basic-api")
-		min_max_config(basic_check, false);
+		min_max_config(basic_check, basic_check, false);
 
 	igt_subtest("min-max-config-idle")
-		min_max_config(idle_check, true);
+		min_max_config(idle_check_min, idle_check_idle, true);
 
 	igt_subtest("min-max-config-loaded") {
 		load_helper_run(HIGH);
-		min_max_config(loaded_check, false);
+		min_max_config(loaded_check, loaded_check, false);
 		load_helper_stop();
 	}
 
-- 
2.4.3