[Intel-gfx] [PATCH 2/2] drm/i915: Add hot_plug hook for hdmi encoder
Daniel Vetter
daniel at ffwll.ch
Tue Oct 6 01:28:21 PDT 2015
On Mon, Oct 05, 2015 at 04:43:15PM +0530, Sonika Jindal wrote:
> This patch adds a separate probe function for HDMI
> EDID read over DDC channel. This function has been
> registered as a .hot_plug handler for HDMI encoder.
>
> The current implementation of hdmi_detect()
> function re-sets the cached HDMI edid (in connector->detect_edid) in
> every detect call.This function gets called many times, sometimes
> directly from userspace probes, forcing drivers to read EDID every
> detect function call.This causes several problems like:
>
> 1. Race conditions in multiple hot_plug / unplug cases, between
> interrupts bottom halves and userspace detections.
> 2. Many Un-necessary EDID reads for single hotplug/unplug
> 3. HDMI complaince failures which expects only one EDID read per hotplug
>
> This function will be serving the purpose of really reading the EDID
> by really probing the DDC channel, and updating the cached EDID.
>
> The plan is to:
> 1. i915 IRQ handler bottom half function already calls
> intel_encoder->hotplug() function. Adding This probe function which
> will read the EDID only in case of a hotplug / unplug.
> 2. During init_connector this probe will be called to read the edid
> 3. Reuse the cached EDID in hdmi_detect() function.
>
> The "< gen7" check is there because this was tested only for >=gen7
> platforms. For older platforms the hotplug/reading edid path remains same.
>
> v2: Calling set_edid instead of hdmi_probe during init.
> Also, for platforms having DDI, intel_encoder for DP and HDMI is same
> (taken from intel_dig_port), so for DP also, hot_plug function gets called
> which is not intended here. So, check for HDMI in intel_hdmi_probe
> Rely on HPD for updating edid only for platforms gen > 8 and also for VLV.
>
> v3: Dropping the gen < 8 || !VLV check. Now all platforms should rely on
> hotplug or init for updating the edid.(Daniel)
> Also, calling hdmi_probe in init instead of set_edid
>
> v4: Renaming intel_hdmi_probe to intel_hdmi_hot_plug.
> Also calling this hotplug handler from intel_hpd_init to take care of init
> resume scenarios.
>
> v5: Moved the call to encoder hotplug during init to separate patch(Daniel)
>
> Signed-off-by: Shashank Sharma <shashank.sharma at intel.com>
> Signed-off-by: Sonika Jindal <sonika.jindal at intel.com>
I merged the first patch in this series, but I have a quick question on
this one here. Can you pls ping me on irc?
Thanks, Daniel
> ---
> drivers/gpu/drm/i915/intel_hdmi.c | 54 +++++++++++++++++++++++++++++--------
> 1 file changed, 43 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index bb33c66..9c1a308 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -1369,18 +1369,16 @@ intel_hdmi_set_edid(struct drm_connector *connector, bool force)
> return connected;
> }
>
> -static enum drm_connector_status
> -intel_hdmi_detect(struct drm_connector *connector, bool force)
> +void intel_hdmi_hot_plug(struct intel_encoder *intel_encoder)
> {
> - enum drm_connector_status status;
> - struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
> - struct drm_i915_private *dev_priv = to_i915(connector->dev);
> + struct intel_hdmi *intel_hdmi =
> + enc_to_intel_hdmi(&intel_encoder->base);
> + struct intel_connector *intel_connector =
> + intel_hdmi->attached_connector;
> + struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
> bool live_status = false;
> unsigned int retry = 3;
>
> - DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
> - connector->base.id, connector->name);
> -
> while (!live_status && --retry) {
> live_status = intel_digital_port_connected(dev_priv,
> hdmi_to_dig_port(intel_hdmi));
> @@ -1390,15 +1388,48 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
> if (!live_status)
> DRM_DEBUG_KMS("Live status not up!");
>
> - intel_hdmi_unset_edid(connector);
> + /*
> + * We are here, means there is a hotplug or a force
> + * detection. Clear the cached EDID and probe the
> + * DDC bus to check the current status of HDMI.
> + */
> + intel_hdmi_unset_edid(&intel_connector->base);
> + if (intel_hdmi_set_edid(&intel_connector->base, live_status))
> + DRM_DEBUG_DRIVER("DDC probe: got EDID\n");
> + else
> + DRM_DEBUG_DRIVER("DDC probe: no EDID\n");
> +}
>
> - if (intel_hdmi_set_edid(connector, live_status)) {
> +static enum drm_connector_status
> +intel_hdmi_detect(struct drm_connector *connector, bool force)
> +{
> + enum drm_connector_status status;
> + struct intel_connector *intel_connector =
> + to_intel_connector(connector);
> +
> + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
> + connector->base.id, connector->name);
> +
> + /*
> + * There are many userspace calls which probe EDID from
> + * detect path. In case of multiple hotplug/unplug, these
> + * can cause race conditions while probing EDID. Also its
> + * waste of CPU cycles to read the EDID again and again
> + * unless there is a real hotplug.
> + * So, rely on hotplugs and init to read edid.
> + * Check connector status based on availability of cached EDID.
> + */
> +
> + if (intel_connector->detect_edid) {
> struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
>
> hdmi_to_dig_port(intel_hdmi)->base.type = INTEL_OUTPUT_HDMI;
> status = connector_status_connected;
> - } else
> + DRM_DEBUG_DRIVER("hdmi status = connected\n");
> + } else {
> status = connector_status_disconnected;
> + DRM_DEBUG_DRIVER("hdmi status = disconnected\n");
> + }
>
> return status;
> }
> @@ -2131,6 +2162,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
> intel_connector->unregister = intel_connector_unregister;
>
> intel_hdmi_add_properties(intel_hdmi, connector);
> + intel_encoder->hot_plug = intel_hdmi_hot_plug;
>
> intel_connector_attach_encoder(intel_connector, intel_encoder);
> drm_connector_register(connector);
> --
> 1.7.10.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Intel-gfx
mailing list