[Intel-gfx] [PATCH 2/3] drm/i915/bxt: add revision id for A1 stepping and use it
Jani Nikula
jani.nikula at intel.com
Tue Oct 6 06:43:11 PDT 2015
On Tue, 06 Oct 2015, Ville Syrjälä <ville.syrjala at linux.intel.com> wrote:
> On Tue, Oct 06, 2015 at 02:41:15PM +0300, Jani Nikula wrote:
>> Prefer inclusive ranges for revision checks rather than "below B0". Per
>> specs A2 is not used, so revid <= A1 matches revid < B0.
>
> The w/a db would say UNTIL_B0 etc., so might be easier to check against
> it if we keep to the same convention.
So I wanted to double check what the convention is. I picked
WaRsDisableCoarsePowerGating.
KBL - SIWA_FOREVER
BXT - SI_WA_BEFORE(BXT_REV_ID_B0)
SKL - SIWA_UNTIL_SKL_E0
Description "Disable coarse power gating for GT4 until GT F0 stepping."
*rolls eyes*
So is that "until" there inclusive or non-inclusive? The db is
contradicting itself... Cc: Sarah who has also looked at workarounds
recently.
Rodrigo, for one thing, I'll want workarounds for SKL and KBL in
different conditions instead of conflated into SKL!
But what about this non-inclusive end of range? It'll matter in patch
3/3. It's not so much a problem for ranges, but rather for specific
revisions, where you'd have to include a revision not mentioned in the
spec at all, e.g. for B0 only:
IS_SKL_REVID(dev, SKL_REVID_B0, SKL_REVID_C0)
instead of the current proposal:
IS_SKL_REVID(dev, SKL_REVID_B0, SKL_REVID_B0)
I'm not really fond of adding separate macros for checking specific
vs. ranges.
Thoughts?
BR,
Jani.
>
>>
>> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
>> ---
>> drivers/gpu/drm/i915/i915_drv.h | 1 +
>> drivers/gpu/drm/i915/i915_gem.c | 2 +-
>> drivers/gpu/drm/i915/i915_guc_submission.c | 2 +-
>> drivers/gpu/drm/i915/intel_ddi.c | 2 +-
>> drivers/gpu/drm/i915/intel_dp.c | 2 +-
>> drivers/gpu/drm/i915/intel_hdmi.c | 2 +-
>> drivers/gpu/drm/i915/intel_lrc.c | 8 ++++----
>> drivers/gpu/drm/i915/intel_pm.c | 6 +++---
>> drivers/gpu/drm/i915/intel_ringbuffer.c | 6 +++---
>> 9 files changed, 16 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
>> index a3b137715604..9833a2055930 100644
>> --- a/drivers/gpu/drm/i915/i915_drv.h
>> +++ b/drivers/gpu/drm/i915/i915_drv.h
>> @@ -2509,6 +2509,7 @@ struct drm_i915_cmd_table {
>> #define SKL_REVID_F0 0x5
>>
>> #define BXT_REVID_A0 0x0
>> +#define BXT_REVID_A1 0x1
>> #define BXT_REVID_B0 0x3
>> #define BXT_REVID_C0 0x9
>>
>> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
>> index f0cfbb9ee12c..fd2d880656b2 100644
>> --- a/drivers/gpu/drm/i915/i915_gem.c
>> +++ b/drivers/gpu/drm/i915/i915_gem.c
>> @@ -3757,7 +3757,7 @@ int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data,
>> * cacheline, whereas normally such cachelines would get
>> * invalidated.
>> */
>> - if (IS_BROXTON(dev) && INTEL_REVID(dev) < BXT_REVID_B0)
>> + if (IS_BROXTON(dev) && INTEL_REVID(dev) <= BXT_REVID_A1)
>> return -ENODEV;
>>
>> level = I915_CACHE_LLC;
>> diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c b/drivers/gpu/drm/i915/i915_guc_submission.c
>> index 036b42bae827..863aa5c82466 100644
>> --- a/drivers/gpu/drm/i915/i915_guc_submission.c
>> +++ b/drivers/gpu/drm/i915/i915_guc_submission.c
>> @@ -161,7 +161,7 @@ static int host2guc_sample_forcewake(struct intel_guc *guc,
>> data[0] = HOST2GUC_ACTION_SAMPLE_FORCEWAKE;
>> /* WaRsDisableCoarsePowerGating:skl,bxt */
>> if (!intel_enable_rc6(dev_priv->dev) ||
>> - (IS_BROXTON(dev) && (INTEL_REVID(dev) < BXT_REVID_B0)) ||
>> + (IS_BROXTON(dev) && (INTEL_REVID(dev) <= BXT_REVID_A1)) ||
>> (IS_SKL_GT3(dev) && (INTEL_REVID(dev) <= SKL_REVID_E0)) ||
>> (IS_SKL_GT4(dev) && (INTEL_REVID(dev) <= SKL_REVID_E0)))
>> data[1] = 0;
>> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
>> index b25e99a432fb..b80e0f5ec5dc 100644
>> --- a/drivers/gpu/drm/i915/intel_ddi.c
>> +++ b/drivers/gpu/drm/i915/intel_ddi.c
>> @@ -3247,7 +3247,7 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
>> * On BXT A0/A1, sw needs to activate DDIA HPD logic and
>> * interrupts to check the external panel connection.
>> */
>> - if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0)
>> + if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) <= BXT_REVID_A1)
>> && port == PORT_B)
>> dev_priv->hotplug.irq_port[PORT_A] = intel_dig_port;
>> else
>> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
>> index 8d34ca7b287a..8baf6fe06313 100644
>> --- a/drivers/gpu/drm/i915/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>> @@ -6087,7 +6087,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
>> break;
>> case PORT_B:
>> intel_encoder->hpd_pin = HPD_PORT_B;
>> - if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
>> + if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) <= BXT_REVID_A1))
>> intel_encoder->hpd_pin = HPD_PORT_A;
>> break;
>> case PORT_C:
>> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
>> index 03d85909c6ab..32e9117ee8e3 100644
>> --- a/drivers/gpu/drm/i915/intel_hdmi.c
>> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
>> @@ -2068,7 +2068,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
>> * On BXT A0/A1, sw needs to activate DDIA HPD logic and
>> * interrupts to check the external panel connection.
>> */
>> - if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) < BXT_REVID_B0))
>> + if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) <= BXT_REVID_A1))
>> intel_encoder->hpd_pin = HPD_PORT_A;
>> else
>> intel_encoder->hpd_pin = HPD_PORT_B;
>> diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
>> index 825fa7a8df86..acd4fa332a80 100644
>> --- a/drivers/gpu/drm/i915/intel_lrc.c
>> +++ b/drivers/gpu/drm/i915/intel_lrc.c
>> @@ -1986,7 +1986,7 @@ static int logical_render_ring_init(struct drm_device *dev)
>> ring->init_hw = gen8_init_render_ring;
>> ring->init_context = gen8_init_rcs_context;
>> ring->cleanup = intel_fini_pipe_control;
>> - if (IS_BROXTON(dev) && INTEL_REVID(dev) < BXT_REVID_B0) {
>> + if (IS_BROXTON(dev) && INTEL_REVID(dev) <= BXT_REVID_A1) {
>> ring->get_seqno = bxt_a_get_seqno;
>> ring->set_seqno = bxt_a_set_seqno;
>> } else {
>> @@ -2038,7 +2038,7 @@ static int logical_bsd_ring_init(struct drm_device *dev)
>> GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VCS1_IRQ_SHIFT;
>>
>> ring->init_hw = gen8_init_common_ring;
>> - if (IS_BROXTON(dev) && INTEL_REVID(dev) < BXT_REVID_B0) {
>> + if (IS_BROXTON(dev) && INTEL_REVID(dev) <= BXT_REVID_A1) {
>> ring->get_seqno = bxt_a_get_seqno;
>> ring->set_seqno = bxt_a_set_seqno;
>> } else {
>> @@ -2093,7 +2093,7 @@ static int logical_blt_ring_init(struct drm_device *dev)
>> GT_CONTEXT_SWITCH_INTERRUPT << GEN8_BCS_IRQ_SHIFT;
>>
>> ring->init_hw = gen8_init_common_ring;
>> - if (IS_BROXTON(dev) && INTEL_REVID(dev) < BXT_REVID_B0) {
>> + if (IS_BROXTON(dev) && INTEL_REVID(dev) <= BXT_REVID_A1) {
>> ring->get_seqno = bxt_a_get_seqno;
>> ring->set_seqno = bxt_a_set_seqno;
>> } else {
>> @@ -2123,7 +2123,7 @@ static int logical_vebox_ring_init(struct drm_device *dev)
>> GT_CONTEXT_SWITCH_INTERRUPT << GEN8_VECS_IRQ_SHIFT;
>>
>> ring->init_hw = gen8_init_common_ring;
>> - if (IS_BROXTON(dev) && INTEL_REVID(dev) < BXT_REVID_B0) {
>> + if (IS_BROXTON(dev) && INTEL_REVID(dev) <= BXT_REVID_A1) {
>> ring->get_seqno = bxt_a_get_seqno;
>> ring->set_seqno = bxt_a_set_seqno;
>> } else {
>> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
>> index 60d120c472ab..e25791e8748f 100644
>> --- a/drivers/gpu/drm/i915/intel_pm.c
>> +++ b/drivers/gpu/drm/i915/intel_pm.c
>> @@ -4348,7 +4348,7 @@ static void gen6_set_rps(struct drm_device *dev, u8 val)
>> struct drm_i915_private *dev_priv = dev->dev_private;
>>
>> /* WaGsvDisableTurbo: Workaround to disable turbo on BXT A* */
>> - if (IS_BROXTON(dev) && (INTEL_REVID(dev) < BXT_REVID_B0))
>> + if (IS_BROXTON(dev) && (INTEL_REVID(dev) <= BXT_REVID_A1))
>> return;
>>
>> WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
>> @@ -4672,7 +4672,7 @@ static void gen9_enable_rps(struct drm_device *dev)
>> gen6_init_rps_frequencies(dev);
>>
>> /* WaGsvDisableTurbo: Workaround to disable turbo on BXT A* */
>> - if (IS_BROXTON(dev) && (INTEL_REVID(dev) < BXT_REVID_B0)) {
>> + if (IS_BROXTON(dev) && (INTEL_REVID(dev) <= BXT_REVID_A1)) {
>> intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
>> return;
>> }
>> @@ -4758,7 +4758,7 @@ static void gen9_enable_rc6(struct drm_device *dev)
>> * 3b: Enable Coarse Power Gating only when RC6 is enabled.
>> * WaRsDisableCoarsePowerGating:skl,bxt - Render/Media PG need to be disabled with RC6.
>> */
>> - if ((IS_BROXTON(dev) && (INTEL_REVID(dev) < BXT_REVID_B0)) ||
>> + if ((IS_BROXTON(dev) && (INTEL_REVID(dev) <= BXT_REVID_A1)) ||
>> ((IS_SKL_GT3(dev) || IS_SKL_GT4(dev)) && (INTEL_REVID(dev) <= SKL_REVID_E0)))
>> I915_WRITE(GEN9_PG_ENABLE, 0);
>> else
>> diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
>> index c82c74caa73c..3753e7518d49 100644
>> --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
>> +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
>> @@ -916,14 +916,14 @@ static int gen9_init_workarounds(struct intel_engine_cs *ring)
>>
>> if ((IS_SKYLAKE(dev) && (INTEL_REVID(dev) == SKL_REVID_A0 ||
>> INTEL_REVID(dev) == SKL_REVID_B0)) ||
>> - (IS_BROXTON(dev) && INTEL_REVID(dev) < BXT_REVID_B0)) {
>> + (IS_BROXTON(dev) && INTEL_REVID(dev) <= BXT_REVID_A1)) {
>> /* WaDisableDgMirrorFixInHalfSliceChicken5:skl,bxt */
>> WA_CLR_BIT_MASKED(GEN9_HALF_SLICE_CHICKEN5,
>> GEN9_DG_MIRROR_FIX_ENABLE);
>> }
>>
>> if ((IS_SKYLAKE(dev) && INTEL_REVID(dev) <= SKL_REVID_B0) ||
>> - (IS_BROXTON(dev) && INTEL_REVID(dev) < BXT_REVID_B0)) {
>> + (IS_BROXTON(dev) && INTEL_REVID(dev) <= BXT_REVID_A1)) {
>> /* WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken:skl,bxt */
>> WA_SET_BIT_MASKED(GEN7_COMMON_SLICE_CHICKEN1,
>> GEN9_RHWO_OPTIMIZATION_DISABLE);
>> @@ -952,7 +952,7 @@ static int gen9_init_workarounds(struct intel_engine_cs *ring)
>>
>> /* WaDisableMaskBasedCammingInRCC:skl,bxt */
>> if ((IS_SKYLAKE(dev) && INTEL_REVID(dev) == SKL_REVID_C0) ||
>> - (IS_BROXTON(dev) && INTEL_REVID(dev) < BXT_REVID_B0))
>> + (IS_BROXTON(dev) && INTEL_REVID(dev) <= BXT_REVID_A1))
>> WA_SET_BIT_MASKED(SLICE_ECO_CHICKEN0,
>> PIXEL_MASK_CAMMING_DISABLE);
>>
>> --
>> 2.1.4
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Ville Syrjälä
> Intel OTC
--
Jani Nikula, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list