[Intel-gfx] [v4.3/-fixes PATCH/BACKPORT 2/4] drm/i915: Assign hwmode after encoder state readout

Jani Nikula jani.nikula at intel.com
Wed Oct 14 02:06:41 PDT 2015


From: Ville Syrjälä <ville.syrjala at linux.intel.com>

The dotclock is often calculated in encoder .get_config(), so we
shouldn't copy the adjusted_mode to hwmode until we have read out the
dotclock.

Gets rid of some warnings like these:
[drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 21: Can't calculate constants, dotclock = 0!
[drm:i915_get_vblank_timestamp] crtc 0 is disabled

v2: Steal Maarten's idea to move crtc->mode etc. assignment too

Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Cc: Patrik Jakobsson <patrik.jakobsson at linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91428
Reviewed-by: Patrik Jakobsson <patrik.jakobsson at linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 57 +++++++++++++++++++-----------------
 1 file changed, 30 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7704315e067f..ed87a7e4c32a 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -15132,33 +15132,6 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 		crtc->base.state->active = crtc->active;
 		crtc->base.enabled = crtc->active;
 
-		memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
-		if (crtc->base.state->active) {
-			intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
-			intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
-			WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
-
-			/*
-			 * The initial mode needs to be set in order to keep
-			 * the atomic core happy. It wants a valid mode if the
-			 * crtc's enabled, so we do the above call.
-			 *
-			 * At this point some state updated by the connectors
-			 * in their ->detect() callback has not run yet, so
-			 * no recalculation can be done yet.
-			 *
-			 * Even if we could do a recalculation and modeset
-			 * right now it would cause a double modeset if
-			 * fbdev or userspace chooses a different initial mode.
-			 *
-			 * If that happens, someone indicated they wanted a
-			 * mode change, which means it's safe to do a full
-			 * recalculation.
-			 */
-			crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
-		}
-
-		crtc->base.hwmode = crtc->config->base.adjusted_mode;
 		readout_plane_state(crtc, to_intel_crtc_state(crtc->base.state));
 
 		DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
@@ -15218,6 +15191,36 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 			      connector->base.name,
 			      connector->base.encoder ? "enabled" : "disabled");
 	}
+
+	for_each_intel_crtc(dev, crtc) {
+		crtc->base.hwmode = crtc->config->base.adjusted_mode;
+
+		memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
+		if (crtc->base.state->active) {
+			intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
+			intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
+			WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
+
+			/*
+			 * The initial mode needs to be set in order to keep
+			 * the atomic core happy. It wants a valid mode if the
+			 * crtc's enabled, so we do the above call.
+			 *
+			 * At this point some state updated by the connectors
+			 * in their ->detect() callback has not run yet, so
+			 * no recalculation can be done yet.
+			 *
+			 * Even if we could do a recalculation and modeset
+			 * right now it would cause a double modeset if
+			 * fbdev or userspace chooses a different initial mode.
+			 *
+			 * If that happens, someone indicated they wanted a
+			 * mode change, which means it's safe to do a full
+			 * recalculation.
+			 */
+			crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
+		}
+	}
 }
 
 /* Scan out the current hw modeset state,
-- 
2.1.4



More information about the Intel-gfx mailing list