[Intel-gfx] [PATCH 2.9/5] drm/i915: Do not wait for flips in intel_crtc_disable_noatomic.
Daniel Vetter
daniel at ffwll.ch
Tue Oct 20 11:33:04 PDT 2015
On Mon, Oct 19, 2015 at 05:09:23PM +0200, Maarten Lankhorst wrote:
> Op 19-10-15 om 15:16 schreef Ander Conselvan De Oliveira:
> > On Wed, 2015-09-23 at 13:27 +0200, Maarten Lankhorst wrote:
> >> Move it from intel_crtc_atomic_commit to prepare_plane_fb.
> >> Waiting is done before committing, otherwise it's too late
> >> to undo the changes.
> >>
> >> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> >> ---
> >> drivers/gpu/drm/i915/intel_atomic.c | 2 -
> >> drivers/gpu/drm/i915/intel_display.c | 107 ++++++++++++++++++++--------------
> >> -
> >> drivers/gpu/drm/i915/intel_drv.h | 2 -
> >> 3 files changed, 62 insertions(+), 49 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/i915/intel_atomic.c
> >> b/drivers/gpu/drm/i915/intel_atomic.c
> >> index f1975f267710..25a891aa3824 100644
> >> --- a/drivers/gpu/drm/i915/intel_atomic.c
> >> +++ b/drivers/gpu/drm/i915/intel_atomic.c
> >> @@ -205,8 +205,6 @@ int intel_atomic_setup_scalers(struct drm_device *dev,
> >> * but since this plane is unchanged just do
> >> the
> >> * minimum required validation.
> >> */
> >> - if (plane->type == DRM_PLANE_TYPE_PRIMARY)
> >> - intel_crtc->atomic.wait_for_flips =
> >> true;
> >> crtc_state->base.planes_changed = true;
> >> }
> >>
> >> diff --git a/drivers/gpu/drm/i915/intel_display.c
> >> b/drivers/gpu/drm/i915/intel_display.c
> >> index 25e1eac260fd..cd651ff6c15b 100644
> >> --- a/drivers/gpu/drm/i915/intel_display.c
> >> +++ b/drivers/gpu/drm/i915/intel_display.c
> >> @@ -3221,32 +3221,6 @@ void intel_finish_reset(struct drm_device *dev)
> >> drm_modeset_unlock_all(dev);
> >> }
> >>
> >> -static void
> >> -intel_finish_fb(struct drm_framebuffer *old_fb)
> >> -{
> >> - struct drm_i915_gem_object *obj = intel_fb_obj(old_fb);
> >> - struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
> >> - bool was_interruptible = dev_priv->mm.interruptible;
> >> - int ret;
> >> -
> >> - /* Big Hammer, we also need to ensure that any pending
> >> - * MI_WAIT_FOR_EVENT inside a user batch buffer on the
> >> - * current scanout is retired before unpinning the old
> >> - * framebuffer. Note that we rely on userspace rendering
> >> - * into the buffer attached to the pipe they are waiting
> >> - * on. If not, userspace generates a GPU hang with IPEHR
> >> - * point to the MI_WAIT_FOR_EVENT.
> >> - *
> >> - * This should only fail upon a hung GPU, in which case we
> >> - * can safely continue.
> >> - */
> >> - dev_priv->mm.interruptible = false;
> >> - ret = i915_gem_object_wait_rendering(obj, true);
> >> - dev_priv->mm.interruptible = was_interruptible;
> >> -
> >> - WARN_ON(ret);
> >> -}
> >> -
> >> static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
> >> {
> >> struct drm_device *dev = crtc->dev;
> >> @@ -3867,15 +3841,23 @@ static void page_flip_completed(struct intel_crtc
> >> *intel_crtc)
> >> work->pending_flip_obj);
> >> }
> >>
> >> -void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
> >> +static int intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
> >> {
> >> struct drm_device *dev = crtc->dev;
> >> struct drm_i915_private *dev_priv = dev->dev_private;
> >> + long ret;
> >>
> >> WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
> >> - if (WARN_ON(wait_event_timeout(dev_priv->pending_flip_queue,
> >> - !intel_crtc_has_pending_flip(crtc),
> >> - 60*HZ) == 0)) {
> >> +
> >> + ret = wait_event_interruptible_timeout(
> >> + dev_priv->pending_flip_queue,
> >> + !intel_crtc_has_pending_flip(crtc),
> >> + 60*HZ);
> >> +
> >> + if (ret < 0)
> >> + return ret;
> >> +
> >> + if (ret == 0) {
> >> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> >>
> >> spin_lock_irq(&dev->event_lock);
> >> @@ -3886,11 +3868,7 @@ void intel_crtc_wait_for_pending_flips(struct drm_crtc
> >> *crtc)
> >> spin_unlock_irq(&dev->event_lock);
> >> }
> >>
> >> - if (crtc->primary->fb) {
> >> - mutex_lock(&dev->struct_mutex);
> >> - intel_finish_fb(crtc->primary->fb);
> >> - mutex_unlock(&dev->struct_mutex);
> >> - }
> > There is another caller of intel_crtc_wait_for_pending_flips() besides the one
> > touched in this patch: intel_crtc_disable_noatomic(). In your previous series
> > you dropped that call based on the fact that there shouldn't be any pending
> > flips at that point, but that patch has been dropped.
> >
> > Wouldn't it be better to add a WARN_ON as Chris suggested then instead of
> > keeping the wait for flips but without the work around?
> >
> Apply with --scissors
>
> ---8<------
> intel_crtc_disable_noatomic is called from hw readout during init, resume and possibly reset.
> During init it's too early to have a page flip queued, before suspending all page flips
> should be finished and during hw reset all page flips should be removed.
>
> It's a bug when there are pending flips here, complain with WARN_ON instead of handling it.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> --
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index f59029c3e577..95c59b5202c5 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -6225,7 +6225,8 @@ static void intel_crtc_disable_noatomic(struct drm_crtc *crtc)
> return;
>
> if (to_intel_plane_state(crtc->primary->state)->visible) {
> - intel_crtc_wait_for_pending_flips(crtc);
> + WARN_ON(intel_crtc->unpin_work);
> +
> intel_pre_disable_primary(crtc);
> }
>
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Intel-gfx
mailing list