[Intel-gfx] [PATCH v2] drm/i915: Don't pass *DP around to link training functions
Thulasimani, Sivakumar
sivakumar.thulasimani at intel.com
Wed Oct 21 07:08:14 PDT 2015
On 10/21/2015 7:22 PM, Ander Conselvan de Oliveira wrote:
> It just makes the code more confusing, so just reference intel_dp->DP
> directly.
>
> Note that this also fix a bug where the value of intel_dp->DP could be
> different than the last value written to the hw, due to an early return
> that would skip the 'intel_dp->DP = DP' line.
>
> v2: Don't preserve old DP value on failure. (Sivakumar)
> - Don't call drm_dp_clock_recovery_ok() twice. (Sivakumar)
> - Keep return type of clock recovery and channel equalization
> functions as void. (Ander)
>
> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 43 +++++++++++++++++------------------------
> 1 file changed, 18 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 8287df4..f310dab 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3596,7 +3596,6 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
>
> static bool
> intel_dp_set_link_train(struct intel_dp *intel_dp,
> - uint32_t *DP,
> uint8_t dp_train_pat)
> {
> struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> @@ -3605,9 +3604,9 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
> uint8_t buf[sizeof(intel_dp->train_set) + 1];
> int ret, len;
>
> - _intel_dp_set_link_train(intel_dp, DP, dp_train_pat);
> + _intel_dp_set_link_train(intel_dp, &intel_dp->DP, dp_train_pat);
>
> - I915_WRITE(intel_dp->output_reg, *DP);
> + I915_WRITE(intel_dp->output_reg, intel_dp->DP);
> POSTING_READ(intel_dp->output_reg);
>
> buf[0] = dp_train_pat;
> @@ -3628,17 +3627,17 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
> }
>
> static bool
> -intel_dp_reset_link_train(struct intel_dp *intel_dp, uint32_t *DP,
> +intel_dp_reset_link_train(struct intel_dp *intel_dp,
> uint8_t dp_train_pat)
> {
> if (!intel_dp->train_set_valid)
> memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set));
> - intel_dp_set_signal_levels(intel_dp, DP);
> - return intel_dp_set_link_train(intel_dp, DP, dp_train_pat);
> + intel_dp_set_signal_levels(intel_dp, &intel_dp->DP);
can this be removed as well ? we are already passing intel_dp so same as
other places.
> + return intel_dp_set_link_train(intel_dp, dp_train_pat);
> }
>
> static bool
> -intel_dp_update_link_train(struct intel_dp *intel_dp, uint32_t *DP,
> +intel_dp_update_link_train(struct intel_dp *intel_dp,
> const uint8_t link_status[DP_LINK_STATUS_SIZE])
> {
> struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> @@ -3647,9 +3646,9 @@ intel_dp_update_link_train(struct intel_dp *intel_dp, uint32_t *DP,
> int ret;
>
> intel_get_adjust_train(intel_dp, link_status);
> - intel_dp_set_signal_levels(intel_dp, DP);
> + intel_dp_set_signal_levels(intel_dp, &intel_dp->DP);
>
> - I915_WRITE(intel_dp->output_reg, *DP);
> + I915_WRITE(intel_dp->output_reg, intel_dp->DP);
> POSTING_READ(intel_dp->output_reg);
>
> ret = drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET,
> @@ -3698,7 +3697,6 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
> int i;
> uint8_t voltage;
> int voltage_tries, loop_tries;
> - uint32_t DP = intel_dp->DP;
> uint8_t link_config[2];
> uint8_t link_bw, rate_select;
>
> @@ -3722,10 +3720,10 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
> link_config[1] = DP_SET_ANSI_8B10B;
> drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2);
>
> - DP |= DP_PORT_EN;
> + intel_dp->DP |= DP_PORT_EN;
>
> /* clock recovery */
> - if (!intel_dp_reset_link_train(intel_dp, &DP,
> + if (!intel_dp_reset_link_train(intel_dp,
> DP_TRAINING_PATTERN_1 |
> DP_LINK_SCRAMBLING_DISABLE)) {
> DRM_ERROR("failed to enable link training\n");
> @@ -3757,7 +3755,7 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
> DRM_DEBUG_KMS("clock recovery not ok, reset");
> /* clear the flag as we are not reusing train set */
> intel_dp->train_set_valid = false;
> - if (!intel_dp_reset_link_train(intel_dp, &DP,
> + if (!intel_dp_reset_link_train(intel_dp,
> DP_TRAINING_PATTERN_1 |
> DP_LINK_SCRAMBLING_DISABLE)) {
> DRM_ERROR("failed to enable link training\n");
> @@ -3776,7 +3774,7 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
> DRM_ERROR("too many full retries, give up\n");
> break;
> }
> - intel_dp_reset_link_train(intel_dp, &DP,
> + intel_dp_reset_link_train(intel_dp,
> DP_TRAINING_PATTERN_1 |
> DP_LINK_SCRAMBLING_DISABLE);
> voltage_tries = 0;
> @@ -3795,13 +3793,11 @@ intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
> voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
>
> /* Update training set as requested by target */
> - if (!intel_dp_update_link_train(intel_dp, &DP, link_status)) {
> + if (!intel_dp_update_link_train(intel_dp, link_status)) {
> DRM_ERROR("failed to update link training\n");
> break;
> }
> }
> -
> - intel_dp->DP = DP;
> }
>
> static void
> @@ -3811,7 +3807,6 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
> struct drm_device *dev = dig_port->base.base.dev;
> bool channel_eq = false;
> int tries, cr_tries;
> - uint32_t DP = intel_dp->DP;
> uint32_t training_pattern = DP_TRAINING_PATTERN_2;
>
> /*
> @@ -3830,7 +3825,7 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
> DRM_ERROR("5.4 Gbps link rate without HBR2/TPS3 support\n");
>
> /* channel equalization */
> - if (!intel_dp_set_link_train(intel_dp, &DP,
> + if (!intel_dp_set_link_train(intel_dp,
> training_pattern |
> DP_LINK_SCRAMBLING_DISABLE)) {
> DRM_ERROR("failed to start channel equalization\n");
> @@ -3859,7 +3854,7 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
> intel_dp->lane_count)) {
> intel_dp->train_set_valid = false;
> intel_dp_link_training_clock_recovery(intel_dp);
> - intel_dp_set_link_train(intel_dp, &DP,
> + intel_dp_set_link_train(intel_dp,
> training_pattern |
> DP_LINK_SCRAMBLING_DISABLE);
> cr_tries++;
> @@ -3876,7 +3871,7 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
> if (tries > 5) {
> intel_dp->train_set_valid = false;
> intel_dp_link_training_clock_recovery(intel_dp);
> - intel_dp_set_link_train(intel_dp, &DP,
> + intel_dp_set_link_train(intel_dp,
> training_pattern |
> DP_LINK_SCRAMBLING_DISABLE);
> tries = 0;
> @@ -3885,7 +3880,7 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
> }
>
> /* Update training set as requested by target */
> - if (!intel_dp_update_link_train(intel_dp, &DP, link_status)) {
> + if (!intel_dp_update_link_train(intel_dp, link_status)) {
> DRM_ERROR("failed to update link training\n");
> break;
> }
> @@ -3894,8 +3889,6 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
>
> intel_dp_set_idle_link_train(intel_dp);
>
> - intel_dp->DP = DP;
> -
> if (channel_eq) {
> intel_dp->train_set_valid = true;
> DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n");
> @@ -3904,7 +3897,7 @@ intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp)
>
> void intel_dp_stop_link_train(struct intel_dp *intel_dp)
> {
> - intel_dp_set_link_train(intel_dp, &intel_dp->DP,
> + intel_dp_set_link_train(intel_dp,
> DP_TRAINING_PATTERN_DISABLE);
> }
>
More information about the Intel-gfx
mailing list