[Intel-gfx] [PATCH 09/14] drm/i915: Hide underruns from eDP PLL and port enable on ILK

[Jesse Barnes]

On 10/29/2015 12:25 PM, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> We get underruns on the other pipe when enabling the CPU eDP PLL and
> port on ILK.
> 
> Bspec knows about the PLL issue, and recommends doing a vblank wait just
> prior to enabling the PLL. That does seem to help, but unfortunately we
> get another underrun when actually enabling the CPU eDP port. Bspec
> doesn't mention that at all, and the same vblank wait trick doesn't
> appear to be effective there.
> 
> Since I have no better clue how to deal with this, just hide the errors.
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_dp.c | 34 +++++++++++++++++++++++++++++++---
>  1 file changed, 31 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 4a0fb63..0b9b440 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -2575,6 +2575,8 @@ static void intel_enable_dp(struct intel_encoder *encoder)
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
>  	uint32_t dp_reg = I915_READ(intel_dp->output_reg);
> +	enum port port = dp_to_dig_port(intel_dp)->port;
> +	enum pipe pipe = crtc->pipe;
>  
>  	if (WARN_ON(dp_reg & DP_PORT_EN))
>  		return;
> @@ -2586,6 +2588,17 @@ static void intel_enable_dp(struct intel_encoder *encoder)
>  
>  	intel_dp_enable_port(intel_dp);
>  
> +	if (port == PORT_A && IS_GEN5(dev_priv)) {
> +		/*
> +		 * Underrun reporting for the other pipe was disabled in
> +		 * g4x_pre_enable_dp(). The eDP PLL and port have now been
> +		 * enabled, so it's now safe to re-enable underrun reporting.
> +		 */
> +		intel_wait_for_vblank_if_active(dev_priv->dev, !pipe);
> +		intel_set_cpu_fifo_underrun_reporting(dev_priv, !pipe, true);
> +		intel_set_pch_fifo_underrun_reporting(dev_priv, !pipe, true);
> +	}
> +
>  	edp_panel_vdd_on(intel_dp);
>  	edp_panel_on(intel_dp);
>  	edp_panel_vdd_off(intel_dp, true);
> @@ -2608,7 +2621,7 @@ static void intel_enable_dp(struct intel_encoder *encoder)
>  
>  	if (crtc->config->has_audio) {
>  		DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
> -				 pipe_name(crtc->pipe));
> +				 pipe_name(pipe));
>  		intel_audio_codec_enable(encoder);
>  	}
>  }
> @@ -2631,13 +2644,28 @@ static void vlv_enable_dp(struct intel_encoder *encoder)
>  
>  static void g4x_pre_enable_dp(struct intel_encoder *encoder)
>  {
> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>  	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> -	struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
> +	enum port port = dp_to_dig_port(intel_dp)->port;
> +	enum pipe pipe = to_intel_crtc(encoder->base.crtc)->pipe;
>  
>  	intel_dp_prepare(encoder);
>  
> +	if (port == PORT_A && IS_GEN5(dev_priv)) {
> +		/*
> +		 * We get FIFO underruns on the other pipe when
> +		 * enabling the CPU eDP PLL, and when enabling CPU
> +		 * eDP port. We could potentially avoid the PLL
> +		 * underrun with a vblank wait just prior to enabling
> +		 * the PLL, but that doesn't appear to help the port
> +		 * enable case. Just sweep it all under the rug.
> +		 */
> +		intel_set_cpu_fifo_underrun_reporting(dev_priv, !pipe, false);
> +		intel_set_pch_fifo_underrun_reporting(dev_priv, !pipe, false);
> +	}
> +
>  	/* Only ilk+ has port A */
> -	if (dport->port == PORT_A) {
> +	if (port == PORT_A) {
>  		ironlake_set_pll_cpu_edp(intel_dp);
>  		ironlake_edp_pll_on(intel_dp);
>  	}
> 

Wish we had a nice hook to hide the gen5 bits somewhere better, but it's
fine as is with the comment.

Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org>