[Intel-gfx] [PATCH 12/14] drm/i915: Hook up pfit for DSI
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Thu Sep 3 11:50:14 PDT 2015
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Add the scaling mode property to DSI connectors, handle changes in the
property value, and compute the panel fitter state during
.compute_config().
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/intel_dsi.c | 69 +++++++++++++++++++++++++++++++++++++---
1 file changed, 64 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 4cf6c0d..8977ee3 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -268,15 +268,20 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,
struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
base);
struct intel_connector *intel_connector = intel_dsi->attached_connector;
- struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
+ struct intel_crtc *crtc = to_intel_crtc(config->base.crtc);
+ const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
struct drm_display_mode *adjusted_mode = &config->base.adjusted_mode;
int ret;
DRM_DEBUG_KMS("\n");
- if (fixed_mode)
+ if (fixed_mode) {
intel_fixed_panel_mode(fixed_mode, adjusted_mode);
+ intel_gmch_panel_fitting(crtc, config,
+ intel_connector->panel.fitting_mode);
+ }
+
/* DSI uses short packets for sync events, so clear mode flags for DSI */
adjusted_mode->flags = 0;
@@ -644,7 +649,7 @@ intel_dsi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
- struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
+ const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
DRM_DEBUG_KMS("\n");
@@ -945,6 +950,43 @@ static int intel_dsi_get_modes(struct drm_connector *connector)
return 1;
}
+static int intel_dsi_set_property(struct drm_connector *connector,
+ struct drm_property *property,
+ uint64_t val)
+{
+ struct drm_device *dev = connector->dev;
+ struct intel_connector *intel_connector = to_intel_connector(connector);
+ struct drm_crtc *crtc;
+ int ret;
+
+ ret = drm_object_property_set_value(&connector->base, property, val);
+ if (ret)
+ return ret;
+
+ if (property == dev->mode_config.scaling_mode_property) {
+ if (val == DRM_MODE_SCALE_NONE) {
+ DRM_DEBUG_KMS("no scaling not supported\n");
+ return -EINVAL;
+ }
+
+ if (intel_connector->panel.fitting_mode == val)
+ return 0;
+
+ intel_connector->panel.fitting_mode = val;
+ }
+
+ crtc = intel_attached_encoder(connector)->base.crtc;
+ if (crtc && crtc->state->enable) {
+ /*
+ * If the CRTC is enabled, the display will be changed
+ * according to the new panel fitting mode.
+ */
+ intel_crtc_restore_mode(crtc);
+ }
+
+ return 0;
+}
+
static void intel_dsi_connector_destroy(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
@@ -987,11 +1029,25 @@ static const struct drm_connector_funcs intel_dsi_connector_funcs = {
.detect = intel_dsi_detect,
.destroy = intel_dsi_connector_destroy,
.fill_modes = drm_helper_probe_single_connector_modes,
+ .set_property = intel_dsi_set_property,
.atomic_get_property = intel_connector_atomic_get_property,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
};
+static void intel_dsi_add_properties(struct intel_connector *connector)
+{
+ struct drm_device *dev = connector->base.dev;
+
+ if (connector->panel.fixed_mode) {
+ drm_mode_create_scaling_mode_property(dev);
+ drm_object_attach_property(&connector->base.base,
+ dev->mode_config.scaling_mode_property,
+ DRM_MODE_SCALE_ASPECT);
+ connector->panel.fitting_mode = DRM_MODE_SCALE_ASPECT;
+ }
+}
+
void intel_dsi_init(struct drm_device *dev)
{
struct intel_dsi *intel_dsi;
@@ -1111,8 +1167,6 @@ void intel_dsi_init(struct drm_device *dev)
intel_connector_attach_encoder(intel_connector, intel_encoder);
- drm_connector_register(connector);
-
drm_panel_attach(intel_dsi->panel, connector);
mutex_lock(&dev->mode_config.mutex);
@@ -1131,6 +1185,11 @@ void intel_dsi_init(struct drm_device *dev)
}
intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
+
+ intel_dsi_add_properties(intel_connector);
+
+ drm_connector_register(connector);
+
intel_panel_setup_backlight(connector, INVALID_PIPE);
return;
--
2.4.6
More information about the Intel-gfx
mailing list