[Intel-gfx] [PATCH i-g-t] tools: remove quick_dump

Ville Syrjälä ville.syrjala at linux.intel.com
Fri Sep 4 04:48:42 PDT 2015


On Fri, Sep 04, 2015 at 02:38:41PM +0300, Ville Syrjälä wrote:
> On Fri, Sep 04, 2015 at 11:22:28AM +0100, Thomas Wood wrote:
> > Remove quick_dump as it has been replaced by the intel_reg tool and move
> > the register definition files to tools/registers.
> > 
> > Signed-off-by: Thomas Wood <thomas.wood at intel.com>
> 
> NAK
> 
> It's the only tool that works on VLV/CHV reasonably.

OK, I take it back.

intel_reg dump --spec=... works fine, and the patch doens't kill the reg
list files.

> 
> > ---
> >  README                                             |  13 ---
> >  configure.ac                                       |  27 +----
> >  man/intel_reg.rst                                  |   3 +-
> >  tools/Makefile.am                                  |   6 +-
> >  tools/quick_dump/.gitignore                        |   2 -
> >  tools/quick_dump/Makefile.am                       |  34 ------
> >  tools/quick_dump/chipset.i                         |  41 --------
> >  tools/quick_dump/chipset_macro_wrap.c              |  68 ------------
> >  tools/quick_dump/quick_dump.py                     | 117 ---------------------
> >  tools/quick_dump/reg_access.py                     |  62 -----------
> >  tools/registers/Makefile.am                        |   1 +
> >  .../audio_config_haswell_plus.txt                  |   0
> >  .../audio_debug_haswell_plus.txt                   |   0
> >  tools/{quick_dump => registers}/base_interrupt.txt |   0
> >  tools/{quick_dump => registers}/base_other.txt     |   0
> >  tools/{quick_dump => registers}/base_power.txt     |   0
> >  tools/{quick_dump => registers}/base_rings.txt     |   0
> >  tools/{quick_dump => registers}/broadwell          |   0
> >  tools/{quick_dump => registers}/cherryview         |   0
> >  .../{quick_dump => registers}/chv_display_base.txt |   0
> >  .../{quick_dump => registers}/chv_dpio_phy_x1.txt  |   0
> >  .../{quick_dump => registers}/chv_dpio_phy_x2.txt  |   0
> >  tools/{quick_dump => registers}/chv_pipe_c.txt     |   0
> >  tools/{quick_dump => registers}/common_display.txt |   0
> >  tools/{quick_dump => registers}/gen6_other.txt     |   0
> >  tools/{quick_dump => registers}/gen7_other.txt     |   0
> >  tools/{quick_dump => registers}/gen8_interrupt.txt |   0
> >  tools/{quick_dump => registers}/gen8_other.txt     |   0
> >  tools/{quick_dump => registers}/haswell            |   0
> >  tools/{quick_dump => registers}/haswell_other.txt  |   0
> >  tools/{quick_dump => registers}/ivybridge          |   0
> >  tools/{quick_dump => registers}/sandybridge        |   0
> >  tools/{quick_dump => registers}/skl_display.txt    |   0
> >  tools/{quick_dump => registers}/skl_powerwells.txt |   0
> >  tools/{quick_dump => registers}/skylake            |   0
> >  tools/{quick_dump => registers}/valleyview         |   0
> >  .../{quick_dump => registers}/vlv_display_base.txt |   0
> >  tools/{quick_dump => registers}/vlv_dpio_phy.txt   |   0
> >  tools/{quick_dump => registers}/vlv_dsi.txt        |   0
> >  tools/{quick_dump => registers}/vlv_flisdsi.txt    |   0
> >  tools/{quick_dump => registers}/vlv_pipe_a.txt     |   0
> >  tools/{quick_dump => registers}/vlv_pipe_b.txt     |   0
> >  tools/{quick_dump => registers}/vlv_power.txt      |   0
> >  43 files changed, 6 insertions(+), 368 deletions(-)
> >  delete mode 100644 tools/quick_dump/.gitignore
> >  delete mode 100644 tools/quick_dump/Makefile.am
> >  delete mode 100644 tools/quick_dump/chipset.i
> >  delete mode 100644 tools/quick_dump/chipset_macro_wrap.c
> >  delete mode 100755 tools/quick_dump/quick_dump.py
> >  delete mode 100755 tools/quick_dump/reg_access.py
> >  create mode 100644 tools/registers/Makefile.am
> >  rename tools/{quick_dump => registers}/audio_config_haswell_plus.txt (100%)
> >  rename tools/{quick_dump => registers}/audio_debug_haswell_plus.txt (100%)
> >  rename tools/{quick_dump => registers}/base_interrupt.txt (100%)
> >  rename tools/{quick_dump => registers}/base_other.txt (100%)
> >  rename tools/{quick_dump => registers}/base_power.txt (100%)
> >  rename tools/{quick_dump => registers}/base_rings.txt (100%)
> >  rename tools/{quick_dump => registers}/broadwell (100%)
> >  rename tools/{quick_dump => registers}/cherryview (100%)
> >  rename tools/{quick_dump => registers}/chv_display_base.txt (100%)
> >  rename tools/{quick_dump => registers}/chv_dpio_phy_x1.txt (100%)
> >  rename tools/{quick_dump => registers}/chv_dpio_phy_x2.txt (100%)
> >  rename tools/{quick_dump => registers}/chv_pipe_c.txt (100%)
> >  rename tools/{quick_dump => registers}/common_display.txt (100%)
> >  rename tools/{quick_dump => registers}/gen6_other.txt (100%)
> >  rename tools/{quick_dump => registers}/gen7_other.txt (100%)
> >  rename tools/{quick_dump => registers}/gen8_interrupt.txt (100%)
> >  rename tools/{quick_dump => registers}/gen8_other.txt (100%)
> >  rename tools/{quick_dump => registers}/haswell (100%)
> >  rename tools/{quick_dump => registers}/haswell_other.txt (100%)
> >  rename tools/{quick_dump => registers}/ivybridge (100%)
> >  rename tools/{quick_dump => registers}/sandybridge (100%)
> >  rename tools/{quick_dump => registers}/skl_display.txt (100%)
> >  rename tools/{quick_dump => registers}/skl_powerwells.txt (100%)
> >  rename tools/{quick_dump => registers}/skylake (100%)
> >  rename tools/{quick_dump => registers}/valleyview (100%)
> >  rename tools/{quick_dump => registers}/vlv_display_base.txt (100%)
> >  rename tools/{quick_dump => registers}/vlv_dpio_phy.txt (100%)
> >  rename tools/{quick_dump => registers}/vlv_dsi.txt (100%)
> >  rename tools/{quick_dump => registers}/vlv_flisdsi.txt (100%)
> >  rename tools/{quick_dump => registers}/vlv_pipe_a.txt (100%)
> >  rename tools/{quick_dump => registers}/vlv_pipe_b.txt (100%)
> >  rename tools/{quick_dump => registers}/vlv_power.txt (100%)
> > 
> > diff --git a/README b/README
> > index ac9f8ad..6235655 100644
> > --- a/README
> > +++ b/README
> > @@ -102,17 +102,6 @@ tools/
> >  	These tools generally must be run as root, safe for the ones that just
> >  	decode dumps.
> >  
> > -tools/quick_dump
> > -	Quick dumper is a python tool built with SWIG bindings to
> > -	important libraries exported by the rest of the tool suite. The tool
> > -	itself is quite straight forward, and should also be a useful example
> > -	for others wishing to write python based i915 tools.
> > -
> > -	Note to package maintainers: It is not recommended to package
> > -	this directory, as the tool is not yet designed for wide usage. If the
> > -	package is installed via "make install" the users will have to set
> > -	their python library path appropriately. Use --disable-dumper
> > -
> >  debugger/
> >  	This tool is to be used to do shader debugging. It acts like a
> >  	debug server accepting connections from debug clients such as
> > @@ -148,9 +137,7 @@ everything (package names may vary):
> >  	libcairo2-dev
> >  	libdrm-dev
> >  	libpciaccess-dev
> > -	libpython3.3-dev
> >  	libunwind-dev
> >  	python-docutils
> > -	swig2.0
> >  	x11proto-dri2-dev
> >  	xutils-dev
> > diff --git a/configure.ac b/configure.ac
> > index 19f6fa4..e4515f3 100644
> > --- a/configure.ac
> > +++ b/configure.ac
> > @@ -131,26 +131,6 @@ if test "x$NOUVEAU" = xyes; then
> >  fi
> >  AM_CONDITIONAL(HAVE_NOUVEAU, [test "x$NOUVEAU" = xyes])
> >  
> > -#Configure options for the python quick-dumper
> > -AC_ARG_ENABLE(dumper,
> > -	      AS_HELP_STRING([--disable-dumper],
> > -			     [Disable the python based register dumper (default: enabled)]),
> > -			     [DUMPER=$enableval], [DUMPER=auto])
> > -if test "x$DUMPER" = xauto; then
> > -	# AX_PYTHON_DEVEL/AX_SWIG_PYTHON are not super friendly and don't
> > -	# easily allow us to introspect the result of their checks. So if we
> > -	# find SWING on the system, that's enough to try compiling the dumper.
> > -	AX_PKG_SWIG(2.0.0, [DUMPER=yes], [DUMPER=no])
> > -fi
> > -if test "x$DUMPER" = xyes; then
> > -	AC_DEFINE(HAVE_DUMPER, 1, [Have dumper support])
> > -	# SWIG configuration
> > -	AX_PKG_SWIG(2.0.0, [], [ AC_MSG_ERROR([SWIG 2.0.0 or higher is required to build..]) ])
> > -	AX_PYTHON_DEVEL([>= '3.0'])
> > -	AX_SWIG_PYTHON
> > -fi
> > -AM_CONDITIONAL(HAVE_DUMPER, [test "x$DUMPER" = xyes])
> > -
> >  # Define a configure option for the shader debugger
> >  AC_ARG_ENABLE(shader-debugger, AS_HELP_STRING([--enable-shader-debugger],
> >  	      [Enable shader debugging support [autodetected]]),
> > @@ -237,9 +217,9 @@ AC_DEFINE_UNQUOTED(TARGET_CPU_PLATFORM, ["$host_cpu"], [Target platform])
> >  
> >  files="broadwell cherryview haswell ivybridge sandybridge valleyview skylake"
> >  for file in $files; do
> > -	QUICK_DUMP_EXTRA_DIST="$QUICK_DUMP_EXTRA_DIST $file `tr '\n' ' ' < $srcdir/tools/quick_dump/$file`"
> > +	REGISTERS_EXTRA_DIST="$REGISTERS_EXTRA_DIST $file `tr '\n' ' ' < $srcdir/tools/registers/$file`"
> >  done
> > -AC_SUBST(QUICK_DUMP_EXTRA_DIST)
> > +AC_SUBST(REGISTERS_EXTRA_DIST)
> >  
> >  AC_CONFIG_FILES([
> >  		 Makefile
> > @@ -255,8 +235,8 @@ AC_CONFIG_FILES([
> >  		 scripts/Makefile
> >  		 tests/Makefile
> >  		 tools/Makefile
> > -		 tools/quick_dump/Makefile
> >  		 tools/null_state_gen/Makefile
> > +		 tools/registers/Makefile
> >  		 debugger/Makefile
> >  		 debugger/system_routine/Makefile
> >  		 assembler/Makefile
> > @@ -284,7 +264,6 @@ echo ""
> >  echo " • Tools:"
> >  echo "       Assembler          : ${enable_assembler}"
> >  echo "       Debugger           : ${enable_debugger}"
> > -echo "       Python dumper      : ${DUMPER}"
> >  echo "       Overlay            : X: ${enable_overlay_xlib}, Xv: ${enable_overlay_xvlib}"
> >  echo ""
> >  echo " • API-Documentation      : ${enable_gtk_doc}"
> > diff --git a/man/intel_reg.rst b/man/intel_reg.rst
> > index c6e2fea..d90c307 100644
> > --- a/man/intel_reg.rst
> > +++ b/man/intel_reg.rst
> > @@ -197,8 +197,7 @@ variable, the directory is scanned for a spec file in this order:
> >  Register Spec File Format
> >  -------------------------
> >  
> > -The register spec format is compatible with the quick_dump.py format, briefly
> > -described below:
> > +The register spec format is briefly described below:
> >  
> >  * Empty lines and lines beginning with "#", ";", or "//" are ignored.
> >  
> > diff --git a/tools/Makefile.am b/tools/Makefile.am
> > index 0aeb173..95ede58 100644
> > --- a/tools/Makefile.am
> > +++ b/tools/Makefile.am
> > @@ -1,10 +1,6 @@
> >  include Makefile.sources
> >  
> > -SUBDIRS = null_state_gen
> > -
> > -if HAVE_DUMPER
> > -SUBDIRS += quick_dump
> > -endif
> > +SUBDIRS = null_state_gen registers
> >  
> >  AM_CPPFLAGS = -I$(top_srcdir) -I$(top_srcdir)/lib
> >  AM_CFLAGS = $(DEBUG_CFLAGS) $(DRM_CFLAGS) $(PCIACCESS_CFLAGS) $(CWARNFLAGS) $(CAIRO_CFLAGS) $(LIBUNWIND_CFLAGS)
> > diff --git a/tools/quick_dump/.gitignore b/tools/quick_dump/.gitignore
> > deleted file mode 100644
> > index 918a66b..0000000
> > --- a/tools/quick_dump/.gitignore
> > +++ /dev/null
> > @@ -1,2 +0,0 @@
> > -chipset_wrap_python.c
> > -chipset.py
> > diff --git a/tools/quick_dump/Makefile.am b/tools/quick_dump/Makefile.am
> > deleted file mode 100644
> > index 0643a81..0000000
> > --- a/tools/quick_dump/Makefile.am
> > +++ /dev/null
> > @@ -1,34 +0,0 @@
> > -AM_CPPFLAGS = -I$(top_srcdir)/lib -I$(top_builddir)/lib $(PYTHON_CPPFLAGS) $(DRM_CFLAGS) $(CAIRO_CFLAGS) -I$(top_srcdir)
> > -
> > -dist_bin_SCRIPTS = quick_dump.py reg_access.py
> > -bin_SCRIPTS = chipset.py
> > -
> > -lib_LTLIBRARIES = I915ChipsetPython.la
> > -I915ChipsetPython_la_LDFLAGS = -module -avoid-version $(PYTHON_LDFLAGS) \
> > -	-Wl,--no-undefined
> > -I915ChipsetPython_la_SOURCES = chipset_macro_wrap.c
> > -nodist_I915ChipsetPython_la_SOURCES = chipset_wrap_python.c
> > -I915ChipsetPython_la_LIBADD =			\
> > -	$(top_builddir)/lib/libintel_tools.la	\
> > -	$(PCIACCESS_LIBS)			\
> > -	$(DRM_LIBS)				\
> > -	$(CAIRO_LIBS)				\
> > -	$(LIBUNWIND_LIBS)			\
> > -	-lrt					\
> > -	-lm					\
> > -	$(NULL)
> > -
> > -chipset.py: chipset_wrap_python.c
> > -
> > -chipset_wrap_python.c: chipset.i
> > -	$(AM_V_GEN)$(SWIG) $(AX_SWIG_PYTHON_OPT) -I/usr/include -I$(top_srcdir)/lib -o $@ $<
> > -
> > -all-local: I915ChipsetPython.la
> > -	$(LN_S) -f .libs/I915ChipsetPython.so _chipset.so
> > -
> > -CLEANFILES = chipset_wrap_python.c chipset.py _chipset.so
> > -EXTRA_DIST = $(QUICK_DUMP_EXTRA_DIST) \
> > -	      base_interrupt.txt base_other.txt base_power.txt base_rings.txt \
> > -	      quick_dump.py \
> > -	      reg_access.py \
> > -	      chipset.i
> > diff --git a/tools/quick_dump/chipset.i b/tools/quick_dump/chipset.i
> > deleted file mode 100644
> > index 90db40e..0000000
> > --- a/tools/quick_dump/chipset.i
> > +++ /dev/null
> > @@ -1,41 +0,0 @@
> > -%module chipset
> > -%include "stdint.i"
> > -%{
> > -#include <pciaccess.h>
> > -#include <stdint.h>
> > -#include "intel_chipset.h"
> > -#include "intel_io.h"
> > -extern int is_sandybridge(unsigned short pciid);
> > -extern int is_ivybridge(unsigned short pciid);
> > -extern int is_valleyview(unsigned short pciid);
> > -extern int is_cherryview(unsigned short pciid);
> > -extern int is_haswell(unsigned short pciid);
> > -extern int is_broadwell(unsigned short pciid);
> > -extern int is_skylake(unsigned short pciid);
> > -extern struct pci_device *intel_get_pci_device();
> > -extern int intel_register_access_init(struct pci_device *pci_dev, int safe);
> > -extern uint32_t intel_register_read(uint32_t reg);
> > -extern void intel_register_write(uint32_t reg, uint32_t val);
> > -extern void intel_register_access_fini();
> > -extern int intel_register_access_needs_fakewake();
> > -extern unsigned short pcidev_to_devid(struct pci_device *pci_dev);
> > -extern uint32_t intel_dpio_reg_read(uint32_t reg, int phy);
> > -extern uint32_t intel_flisdsi_reg_read(uint32_t reg);
> > -%}
> > -
> > -extern int is_sandybridge(unsigned short pciid);
> > -extern int is_ivybridge(unsigned short pciid);
> > -extern int is_valleyview(unsigned short pciid);
> > -extern int is_cherryview(unsigned short pciid);
> > -extern int is_haswell(unsigned short pciid);
> > -extern int is_broadwell(unsigned short pciid);
> > -extern int is_skylake(unsigned short pciid);
> > -extern struct pci_device *intel_get_pci_device();
> > -extern int intel_register_access_init(struct pci_device *pci_dev, int safe);
> > -extern uint32_t intel_register_read(uint32_t reg);
> > -extern void intel_register_write(uint32_t reg, uint32_t val);
> > -extern void intel_register_access_fini();
> > -extern int intel_register_access_needs_fakewake();
> > -extern unsigned short pcidev_to_devid(struct pci_device *pci_dev);
> > -extern uint32_t intel_dpio_reg_read(uint32_t reg, int phy);
> > -extern uint32_t intel_flisdsi_reg_read(uint32_t reg);
> > diff --git a/tools/quick_dump/chipset_macro_wrap.c b/tools/quick_dump/chipset_macro_wrap.c
> > deleted file mode 100644
> > index fa568d6..0000000
> > --- a/tools/quick_dump/chipset_macro_wrap.c
> > +++ /dev/null
> > @@ -1,68 +0,0 @@
> > -/*
> > - * Copyright © 2014 Intel Corporation
> > - *
> > - * Permission is hereby granted, free of charge, to any person obtaining a
> > - * copy of this software and associated documentation files (the "Software"),
> > - * to deal in the Software without restriction, including without limitation
> > - * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> > - * and/or sell copies of the Software, and to permit persons to whom the
> > - * Software is furnished to do so, subject to the following conditions:
> > - *
> > - * The above copyright notice and this permission notice (including the next
> > - * paragraph) shall be included in all copies or substantial portions of the
> > - * Software.
> > - *
> > - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> > - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> > - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> > - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> > - * DEALINGS IN THE SOFTWARE.
> > - */
> > -
> > -#include <stdbool.h>
> > -#include <stdlib.h>
> > -#include <pciaccess.h>
> > -#include "intel_chipset.h"
> > -
> > -int is_sandybridge(unsigned short pciid)
> > -{
> > -	return IS_GEN6(pciid);
> > -}
> > -
> > -int is_ivybridge(unsigned short pciid)
> > -{
> > -	return IS_IVYBRIDGE(pciid);
> > -}
> > -
> > -int is_valleyview(unsigned short pciid)
> > -{
> > -	return IS_VALLEYVIEW(pciid);
> > -}
> > -
> > -int is_cherryview(unsigned short pciid)
> > -{
> > -	return IS_CHERRYVIEW(pciid);
> > -}
> > -
> > -int is_haswell(unsigned short pciid)
> > -{
> > -	return IS_HASWELL(pciid);
> > -}
> > -
> > -int is_broadwell(unsigned short pciid)
> > -{
> > -	return IS_BROADWELL(pciid);
> > -}
> > -
> > -int is_skylake(unsigned short pciid)
> > -{
> > -	return IS_SKYLAKE(pciid);
> > -}
> > -
> > -/* Simple helper because I couldn't make this work in the script */
> > -unsigned short pcidev_to_devid(struct pci_device *pdev)
> > -{
> > -	return pdev->device_id;
> > -}
> > diff --git a/tools/quick_dump/quick_dump.py b/tools/quick_dump/quick_dump.py
> > deleted file mode 100755
> > index 702a9d5..0000000
> > --- a/tools/quick_dump/quick_dump.py
> > +++ /dev/null
> > @@ -1,117 +0,0 @@
> > -#!/usr/bin/env python3
> > -
> > -# register definition format:
> > -# ('register name', 'register offset', 'register type')
> > -#
> > -# register types:
> > -#  '' - normal register
> > -#  'DPIO' - DPIO register
> > -#
> > -# vim: tabstop=8 expandtab shiftwidth=4 softtabstop=4
> > -
> > -import argparse
> > -import os
> > -import sys
> > -import ast
> > -import subprocess
> > -import chipset
> > -import reg_access as reg
> > -
> > -# Ignore lines which are considered comments
> > -def ignore_line(line):
> > -    if not line.strip():
> > -        return True
> > -    if len(line) > 1:
> > -        if line[1] == '/' and line[0] == '/':
> > -            return True
> > -    if len(line) > 0:
> > -        if line[0] == '#' or line[0] == ';':
> > -            return True
> > -    return False
> > -
> > -def parse_file(file):
> > -    print('{0:^10s} | {1:^33s} | {2:^10s}'. format('offset', file.name, 'value'))
> > -    print('-' * 59)
> > -    for line in file:
> > -        if ignore_line(line):
> > -            continue
> > -        register = ast.literal_eval(line)
> > -        intreg = int(register[1], 16)
> > -        if register[2] == 'FLISDSI':
> > -            val = reg.flisdsi_read(intreg)
> > -        elif register[2] == 'DPIO':
> > -            val = reg.dpio_read(intreg, 0)
> > -        elif register[2] == 'DPIO2':
> > -            val = reg.dpio_read(intreg, 1)
> > -        else:
> > -            if register[2] != '':
> > -                intreg = intreg + int(register[2], 16)
> > -            val = reg.read(intreg)
> > -        print('{0:#010x} | {1:<33} | {2:#010x}'.format(intreg, register[0], val))
> > -    print('')
> > -
> > -def walk_base_files():
> > -    for root, dirs, files in os.walk('.'):
> > -        for name in files:
> > -            if name.startswith(("base_")):
> > -                file = open(name.rstrip(), 'r')
> > -                parse_file(file)
> > -
> > -def autodetect_chipset():
> > -    pci_dev = chipset.intel_get_pci_device()
> > -    devid = chipset.pcidev_to_devid(pci_dev)
> > -    if chipset.is_sandybridge(devid):
> > -        return open('sandybridge', 'r')
> > -    elif chipset.is_ivybridge(devid):
> > -        return open('ivybridge', 'r')
> > -    elif chipset.is_cherryview(devid):
> > -        return open('cherryview', 'r')
> > -    elif chipset.is_valleyview(devid):
> > -        return open('valleyview', 'r')
> > -    elif chipset.is_haswell(devid):
> > -        return open('haswell', 'r')
> > -    elif chipset.is_broadwell(devid):
> > -        return open('broadwell', 'r')
> > -    elif chipset.is_skylake(devid):
> > -        return open('skylake', 'r')
> > -    else:
> > -        print("Autodetect of devid " + hex(devid) + " failed")
> > -        return None
> > -
> > -if __name__ == "__main__":
> > -    parser = argparse.ArgumentParser(description='Dumb register dumper.')
> > -    parser.add_argument('-b', '--baseless',
> > -            action='store_true', default=False,
> > -            help='baseless mode, ignore files starting with base_')
> > -    parser.add_argument('-f', '--file',
> > -            type=argparse.FileType('r'), default=None)
> > -    parser.add_argument('profile', nargs='?',
> > -            type=argparse.FileType('r'), default=None)
> > -
> > -    args = parser.parse_args()
> > -
> > -    if reg.init() == False:
> > -        print("Register initialization failed")
> > -        sys.exit()
> > -
> > -    # Put us where the script is
> > -    os.chdir(os.path.dirname(sys.argv[0]))
> > -
> > -    # specifying a file trumps all other things
> > -    if args.file != None:
> > -        parse_file(args.file)
> > -        sys.exit()
> > -
> > -    #parse anything named base_ these are assumed to apply for all gens.
> > -    if args.baseless == False:
> > -        walk_base_files()
> > -
> > -    if args.profile == None:
> > -        args.profile = autodetect_chipset()
> > -
> > -    if args.profile == None:
> > -        sys.exit()
> > -
> > -    for extra in args.profile:
> > -        extra_file = open(extra.rstrip(), 'r')
> > -        parse_file(extra_file)
> > diff --git a/tools/quick_dump/reg_access.py b/tools/quick_dump/reg_access.py
> > deleted file mode 100755
> > index 6a93f63..0000000
> > --- a/tools/quick_dump/reg_access.py
> > +++ /dev/null
> > @@ -1,62 +0,0 @@
> > -#!/usr/bin/env python3
> > -# vim: tabstop=8 expandtab shiftwidth=4 softtabstop=4
> > -import chipset
> > -
> > -def read(reg):
> > -    val = chipset.intel_register_read(reg)
> > -    return val
> > -
> > -def write(reg, val):
> > -    chipset.intel_register_write(reg, val)
> > -
> > -def gen6_forcewake_get():
> > -    write(0xa18c, 0x1)
> > -    read(0xa180)
> > -
> > -def mt_forcewake_get():
> > -    write(0xa188, 0x10001)
> > -    read(0xa180)
> > -
> > -def vlv_forcewake_get():
> > -    write(0x1300b0, 0x10001)
> > -    read(0x1300b4)
> > -
> > -# don't be clever, just try all possibilities
> > -def get_wake():
> > -    gen6_forcewake_get()
> > -    mt_forcewake_get()
> > -    vlv_forcewake_get()
> > -
> > -def dpio_read(reg, phy):
> > -    phy = int(phy)
> > -
> > -    val = chipset.intel_dpio_reg_read(reg, phy)
> > -    return val
> > -
> > -def flisdsi_read(reg):
> > -    val = chipset.intel_flisdsi_reg_read(reg)
> > -    return val
> > -
> > -
> > -def init():
> > -    pci_dev = chipset.intel_get_pci_device()
> > -    ret = chipset.intel_register_access_init(pci_dev, 0)
> > -    if ret != 0:
> > -        print("Register access init failed");
> > -        return False
> > -
> > -    if chipset.intel_register_access_needs_fakewake():
> > -        print("Forcing forcewake. Don't expect your system to work after this.")
> > -        get_wake()
> > -
> > -    return True
> > -
> > -if __name__ == "__main__":
> > -    import sys
> > -
> > -    if init() == False:
> > -        sys.exit()
> > -
> > -    reg = sys.argv[1]
> > -    print(hex(read(int(reg,16))))
> > -    chipset.intel_register_access_fini()
> > diff --git a/tools/registers/Makefile.am b/tools/registers/Makefile.am
> > new file mode 100644
> > index 0000000..4e1e3c2
> > --- /dev/null
> > +++ b/tools/registers/Makefile.am
> > @@ -0,0 +1 @@
> > +EXTRA_DIST = ${REGISTERS_EXTRA_DIST}
> > diff --git a/tools/quick_dump/audio_config_haswell_plus.txt b/tools/registers/audio_config_haswell_plus.txt
> > similarity index 100%
> > rename from tools/quick_dump/audio_config_haswell_plus.txt
> > rename to tools/registers/audio_config_haswell_plus.txt
> > diff --git a/tools/quick_dump/audio_debug_haswell_plus.txt b/tools/registers/audio_debug_haswell_plus.txt
> > similarity index 100%
> > rename from tools/quick_dump/audio_debug_haswell_plus.txt
> > rename to tools/registers/audio_debug_haswell_plus.txt
> > diff --git a/tools/quick_dump/base_interrupt.txt b/tools/registers/base_interrupt.txt
> > similarity index 100%
> > rename from tools/quick_dump/base_interrupt.txt
> > rename to tools/registers/base_interrupt.txt
> > diff --git a/tools/quick_dump/base_other.txt b/tools/registers/base_other.txt
> > similarity index 100%
> > rename from tools/quick_dump/base_other.txt
> > rename to tools/registers/base_other.txt
> > diff --git a/tools/quick_dump/base_power.txt b/tools/registers/base_power.txt
> > similarity index 100%
> > rename from tools/quick_dump/base_power.txt
> > rename to tools/registers/base_power.txt
> > diff --git a/tools/quick_dump/base_rings.txt b/tools/registers/base_rings.txt
> > similarity index 100%
> > rename from tools/quick_dump/base_rings.txt
> > rename to tools/registers/base_rings.txt
> > diff --git a/tools/quick_dump/broadwell b/tools/registers/broadwell
> > similarity index 100%
> > rename from tools/quick_dump/broadwell
> > rename to tools/registers/broadwell
> > diff --git a/tools/quick_dump/cherryview b/tools/registers/cherryview
> > similarity index 100%
> > rename from tools/quick_dump/cherryview
> > rename to tools/registers/cherryview
> > diff --git a/tools/quick_dump/chv_display_base.txt b/tools/registers/chv_display_base.txt
> > similarity index 100%
> > rename from tools/quick_dump/chv_display_base.txt
> > rename to tools/registers/chv_display_base.txt
> > diff --git a/tools/quick_dump/chv_dpio_phy_x1.txt b/tools/registers/chv_dpio_phy_x1.txt
> > similarity index 100%
> > rename from tools/quick_dump/chv_dpio_phy_x1.txt
> > rename to tools/registers/chv_dpio_phy_x1.txt
> > diff --git a/tools/quick_dump/chv_dpio_phy_x2.txt b/tools/registers/chv_dpio_phy_x2.txt
> > similarity index 100%
> > rename from tools/quick_dump/chv_dpio_phy_x2.txt
> > rename to tools/registers/chv_dpio_phy_x2.txt
> > diff --git a/tools/quick_dump/chv_pipe_c.txt b/tools/registers/chv_pipe_c.txt
> > similarity index 100%
> > rename from tools/quick_dump/chv_pipe_c.txt
> > rename to tools/registers/chv_pipe_c.txt
> > diff --git a/tools/quick_dump/common_display.txt b/tools/registers/common_display.txt
> > similarity index 100%
> > rename from tools/quick_dump/common_display.txt
> > rename to tools/registers/common_display.txt
> > diff --git a/tools/quick_dump/gen6_other.txt b/tools/registers/gen6_other.txt
> > similarity index 100%
> > rename from tools/quick_dump/gen6_other.txt
> > rename to tools/registers/gen6_other.txt
> > diff --git a/tools/quick_dump/gen7_other.txt b/tools/registers/gen7_other.txt
> > similarity index 100%
> > rename from tools/quick_dump/gen7_other.txt
> > rename to tools/registers/gen7_other.txt
> > diff --git a/tools/quick_dump/gen8_interrupt.txt b/tools/registers/gen8_interrupt.txt
> > similarity index 100%
> > rename from tools/quick_dump/gen8_interrupt.txt
> > rename to tools/registers/gen8_interrupt.txt
> > diff --git a/tools/quick_dump/gen8_other.txt b/tools/registers/gen8_other.txt
> > similarity index 100%
> > rename from tools/quick_dump/gen8_other.txt
> > rename to tools/registers/gen8_other.txt
> > diff --git a/tools/quick_dump/haswell b/tools/registers/haswell
> > similarity index 100%
> > rename from tools/quick_dump/haswell
> > rename to tools/registers/haswell
> > diff --git a/tools/quick_dump/haswell_other.txt b/tools/registers/haswell_other.txt
> > similarity index 100%
> > rename from tools/quick_dump/haswell_other.txt
> > rename to tools/registers/haswell_other.txt
> > diff --git a/tools/quick_dump/ivybridge b/tools/registers/ivybridge
> > similarity index 100%
> > rename from tools/quick_dump/ivybridge
> > rename to tools/registers/ivybridge
> > diff --git a/tools/quick_dump/sandybridge b/tools/registers/sandybridge
> > similarity index 100%
> > rename from tools/quick_dump/sandybridge
> > rename to tools/registers/sandybridge
> > diff --git a/tools/quick_dump/skl_display.txt b/tools/registers/skl_display.txt
> > similarity index 100%
> > rename from tools/quick_dump/skl_display.txt
> > rename to tools/registers/skl_display.txt
> > diff --git a/tools/quick_dump/skl_powerwells.txt b/tools/registers/skl_powerwells.txt
> > similarity index 100%
> > rename from tools/quick_dump/skl_powerwells.txt
> > rename to tools/registers/skl_powerwells.txt
> > diff --git a/tools/quick_dump/skylake b/tools/registers/skylake
> > similarity index 100%
> > rename from tools/quick_dump/skylake
> > rename to tools/registers/skylake
> > diff --git a/tools/quick_dump/valleyview b/tools/registers/valleyview
> > similarity index 100%
> > rename from tools/quick_dump/valleyview
> > rename to tools/registers/valleyview
> > diff --git a/tools/quick_dump/vlv_display_base.txt b/tools/registers/vlv_display_base.txt
> > similarity index 100%
> > rename from tools/quick_dump/vlv_display_base.txt
> > rename to tools/registers/vlv_display_base.txt
> > diff --git a/tools/quick_dump/vlv_dpio_phy.txt b/tools/registers/vlv_dpio_phy.txt
> > similarity index 100%
> > rename from tools/quick_dump/vlv_dpio_phy.txt
> > rename to tools/registers/vlv_dpio_phy.txt
> > diff --git a/tools/quick_dump/vlv_dsi.txt b/tools/registers/vlv_dsi.txt
> > similarity index 100%
> > rename from tools/quick_dump/vlv_dsi.txt
> > rename to tools/registers/vlv_dsi.txt
> > diff --git a/tools/quick_dump/vlv_flisdsi.txt b/tools/registers/vlv_flisdsi.txt
> > similarity index 100%
> > rename from tools/quick_dump/vlv_flisdsi.txt
> > rename to tools/registers/vlv_flisdsi.txt
> > diff --git a/tools/quick_dump/vlv_pipe_a.txt b/tools/registers/vlv_pipe_a.txt
> > similarity index 100%
> > rename from tools/quick_dump/vlv_pipe_a.txt
> > rename to tools/registers/vlv_pipe_a.txt
> > diff --git a/tools/quick_dump/vlv_pipe_b.txt b/tools/registers/vlv_pipe_b.txt
> > similarity index 100%
> > rename from tools/quick_dump/vlv_pipe_b.txt
> > rename to tools/registers/vlv_pipe_b.txt
> > diff --git a/tools/quick_dump/vlv_power.txt b/tools/registers/vlv_power.txt
> > similarity index 100%
> > rename from tools/quick_dump/vlv_power.txt
> > rename to tools/registers/vlv_power.txt
> > -- 
> > 1.9.1
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> -- 
> Ville Syrjälä
> Intel OTC
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC


More information about the Intel-gfx mailing list