[Intel-gfx] [PATCH i-g-t 2/2] Adding kms_nv12 to test display NV12 feature
Chandra Konduru
chandra.konduru at intel.com
Fri Sep 4 19:58:33 PDT 2015
From: chandra konduru <chandra.konduru at intel.com>
This patch adds kms_nv12 test case. It covers testing NV12
in linear/tile-X/tile-Y tiling formats in 0/90/180/270
orientations. For each tiling format, it tests several
combinations of planes and its scaling.
v2:
-Added 90/270 tests (me)
-took out crc test as it isn't adding much value due to chroma upsampling (me)
v3:
-Make --list-subtests option work (Tvrtko)
-Make nv12 unsupported test run properly either as a sub test
or along with all other tests (me)
-Added nv12 fb with invalid params (Daniel)
v4:
-Avoid modeset for invalid tests (Daniel)
Signed-off-by: chandra konduru <chandra.konduru at intel.com>
---
tests/.gitignore | 1 +
tests/Makefile.sources | 1 +
tests/kms_nv12.c | 753 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 755 insertions(+)
create mode 100644 tests/kms_nv12.c
diff --git a/tests/.gitignore b/tests/.gitignore
index d6d05ff..2de4712 100644
--- a/tests/.gitignore
+++ b/tests/.gitignore
@@ -155,6 +155,7 @@ kms_setmode
kms_sink_crc_basic
kms_universal_plane
kms_vblank
+kms_nv12
pm_backlight
pm_lpsp
pm_rc6_residency
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index ef69299..a7804fa 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -85,6 +85,7 @@ TESTS_progs_M = \
kms_crtc_background_color \
kms_plane_scaling \
kms_panel_fitting \
+ kms_nv12 \
pm_backlight \
pm_lpsp \
pm_rpm \
diff --git a/tests/kms_nv12.c b/tests/kms_nv12.c
new file mode 100644
index 0000000..61f826a
--- /dev/null
+++ b/tests/kms_nv12.c
@@ -0,0 +1,753 @@
+/*
+ * Copyright © 2013,2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#include <math.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#include "drmtest.h"
+#include "igt_debugfs.h"
+#include "igt_kms.h"
+#include "igt_core.h"
+#include "intel_chipset.h"
+#include "ioctl_wrappers.h"
+
+IGT_TEST_DESCRIPTION("Test display NV12 support");
+
+uint32_t devid;
+typedef struct {
+ int drm_fd;
+ igt_display_t display;
+ int num_scalers;
+ int num_planes;
+
+ struct igt_fb fb1;
+ struct igt_fb fb1_nv12;
+ struct igt_fb fb2;
+ struct igt_fb fb2_nv12;
+ struct igt_fb fb3;
+ struct igt_fb fb3_nv12;
+ int fb_id1;
+ int fb_id1_nv12;
+ int fb_id2;
+ int fb_id2_nv12;
+ int fb_id3;
+ int fb_id3_nv12;
+
+ igt_plane_t *plane1;
+ igt_plane_t *plane2;
+ igt_plane_t *plane3;
+
+ uint64_t tiled;
+ int rotation;
+} data_t;
+
+typedef struct {
+ int width;
+ int height;
+} res_t;
+
+#define IMG_FILE "1080p-left.png"
+
+static void
+paint_pattern(data_t *d, struct igt_fb *fb, uint16_t w, uint16_t h)
+{
+ cairo_t *cr;
+
+ cr = igt_get_cairo_ctx(d->drm_fd, fb);
+ igt_paint_test_pattern(cr, w, h);
+ cairo_destroy(cr);
+}
+
+static void
+paint_image(data_t *d, struct igt_fb *fb, uint16_t w, uint16_t h)
+{
+ cairo_t *cr;
+
+ cr = igt_get_cairo_ctx(d->drm_fd, fb);
+ igt_paint_image(cr, IMG_FILE, 0, 0, w, h);
+ cairo_destroy(cr);
+}
+
+static void prepare_crtc(data_t *data, igt_output_t *output, enum pipe pipe,
+ igt_plane_t *plane, drmModeModeInfo *mode, enum igt_commit_style s)
+{
+ igt_display_t *display = &data->display;
+
+ igt_output_set_pipe(output, pipe);
+
+ /* before allocating, free if any older fb */
+ if (data->fb_id1) {
+ igt_remove_fb(data->drm_fd, &data->fb1);
+ data->fb_id1 = 0;
+ }
+
+ /* allocate fb for plane 1 */
+ data->fb_id1 = igt_create_fb(data->drm_fd,
+ mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ data->tiled, /* tiled */
+ &data->fb1);
+ igt_assert(data->fb_id1);
+
+ paint_pattern(data, &data->fb1, mode->hdisplay, mode->vdisplay);
+
+ /*
+ * We always set the primary plane to actually enable the pipe as
+ * there's no way (that works) to light up a pipe with only a sprite
+ * plane enabled at the moment.
+ */
+ if (!plane->is_primary) {
+ igt_plane_t *primary;
+
+ primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ igt_plane_set_fb(primary, &data->fb1);
+ }
+
+ igt_plane_set_fb(plane, &data->fb1);
+ if (s == COMMIT_LEGACY) {
+ int ret;
+ ret = drmModeSetCrtc(data->drm_fd,
+ output->config.crtc->crtc_id,
+ data->fb_id1,
+ plane->pan_x, plane->pan_y,
+ &output->id,
+ 1,
+ mode);
+ igt_assert(ret == 0);
+ } else {
+ igt_display_commit2(display, s);
+ }
+}
+
+static void cleanup_crtc(data_t *data, igt_output_t *output, igt_plane_t *plane)
+{
+ igt_display_t *display = &data->display;
+
+ if (data->fb_id1) {
+ igt_remove_fb(data->drm_fd, &data->fb1);
+ data->fb_id1 = 0;
+ }
+ if (data->fb_id2) {
+ igt_remove_fb(data->drm_fd, &data->fb2);
+ data->fb_id2 = 0;
+ }
+ if (data->fb_id3) {
+ igt_remove_fb(data->drm_fd, &data->fb3);
+ data->fb_id3 = 0;
+ }
+
+ if (data->fb_id1_nv12) {
+ igt_remove_fb(data->drm_fd, &data->fb1_nv12);
+ data->fb_id1_nv12 = 0;
+ }
+
+ if (data->fb_id2_nv12) {
+ igt_remove_fb(data->drm_fd, &data->fb2_nv12);
+ data->fb_id2_nv12 = 0;
+ }
+
+ if (data->fb_id3_nv12) {
+ igt_remove_fb(data->drm_fd, &data->fb3_nv12);
+ data->fb_id3_nv12 = 0;
+ }
+
+ if (!plane->is_primary) {
+ igt_plane_t *primary;
+
+ primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ igt_plane_set_fb(primary, NULL);
+ }
+
+ igt_plane_set_fb(plane, NULL);
+ igt_output_set_pipe(output, PIPE_ANY);
+
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+}
+
+static void test_nv12_plane(data_t *d)
+{
+ igt_display_t *display = &d->display;
+ igt_output_t *output;
+ enum pipe pipe;
+ int valid_tests = 0;
+ int img_width;
+ int img_height;
+
+ igt_require(d->display.has_universal_planes);
+ igt_require(d->num_scalers);
+
+ for_each_connected_output(display, output) {
+ drmModeModeInfo *mode;
+ mode = igt_output_get_mode(output);
+ pipe = output->config.pipe;
+
+ igt_output_set_pipe(output, pipe);
+
+ /* get planes */
+ d->plane1 = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ d->plane2 = igt_output_get_plane(output, IGT_PLANE_2);
+ if (d->num_planes >= 3)
+ d->plane3 = igt_output_get_plane(output, IGT_PLANE_3);
+
+ /* set required rotation */
+ igt_plane_set_rotation(d->plane1, d->rotation);
+ igt_plane_set_rotation(d->plane2, d->rotation);
+ if (d->num_planes >= 3)
+ igt_plane_set_rotation(d->plane3, d->rotation);
+
+ /* Set up display with plane 1 */
+ prepare_crtc(d, output, pipe, d->plane1, mode, COMMIT_LEGACY);
+
+ /* allocate fb2, fb2_nv12, fb1_nv12 with image size */
+ igt_get_image_size(IMG_FILE, &img_width, &img_height);
+
+ /* fb2 is in RGB format */
+ d->fb_id2 = igt_create_fb(d->drm_fd,
+ img_width, img_height,
+ DRM_FORMAT_XRGB8888,
+ d->tiled, /* tiled */
+ &d->fb2);
+ igt_assert(d->fb_id2);
+
+ /* fb1_nv12 is in NV12 format */
+ d->fb_id1_nv12 = igt_create_fb(d->drm_fd,
+ img_width, img_height,
+ DRM_FORMAT_NV12,
+ d->tiled, /* tiled */
+ &d->fb1_nv12);
+ igt_assert(d->fb_id1_nv12);
+
+ /* fb2_nv12 is in NV12 format */
+ d->fb_id2_nv12 = igt_create_fb(d->drm_fd,
+ img_width, img_height,
+ DRM_FORMAT_NV12,
+ d->tiled,
+ &d->fb2_nv12);
+ igt_assert(d->fb_id2_nv12);
+
+ /* fb3 is in RGB */
+ d->fb_id3 = igt_create_fb(d->drm_fd,
+ mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_ARGB8888,
+ d->tiled, /* tiled */
+ &d->fb3);
+ igt_assert(d->fb_id3);
+
+ /*
+ * Mimicing some not exactly but closer to some real usage
+ */
+
+ /* set up data for fb2: both fb1_nv12, fb2_nv12 uses this */
+ paint_image(d, &d->fb2, img_width, img_height);
+
+ /* set up data in fb1_nv12: fb2 RGB-> fb1_nv12 */
+ igt_fb_csc_xrgb_to_nv12(d->drm_fd, &d->fb1_nv12, &d->fb2);
+
+ /* set up data in fb2_nv12: fb2 RGB-> fb2_nv12 */
+ igt_fb_csc_xrgb_to_nv12(d->drm_fd, &d->fb2_nv12, &d->fb2);
+
+ /* set up data in fb3 */
+ paint_pattern(d, &d->fb3, d->fb3.width, d->fb3.height);
+
+ /* Set up fb2_nv12->plane2 mapping. */
+ igt_plane_set_fb(d->plane2, &d->fb2_nv12);
+ /* 2nd plane nv12 windowed - no scaling */
+ igt_fb_set_position(&d->fb2_nv12, d->plane2, 0, 0);
+ igt_fb_set_size(&d->fb2_nv12, d->plane2, d->fb2_nv12.width,
+ d->fb2_nv12.height);
+ igt_plane_set_position(d->plane2, 0, 0);
+ igt_plane_set_size(d->plane2, d->fb2_nv12.width, d->fb2_nv12.height);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* Change primary plane to nv12 full screen: scaling + NV12 */
+ igt_plane_set_fb(d->plane1, &d->fb1_nv12);
+ igt_fb_set_position(&d->fb1_nv12, d->plane1, 0, 0);
+ igt_fb_set_size(&d->fb1_nv12, d->plane1, d->fb1_nv12.width,
+ d->fb1_nv12.height);
+ igt_plane_set_position(d->plane1, 0, 0);
+ igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ if (d->num_planes >= 3) {
+ /* Set up fb3->plane3 mapping. */
+ igt_plane_set_fb(d->plane3, &d->fb3);
+
+ /* 3rd plane full screen - no scaling. */
+ igt_fb_set_position(&d->fb3, d->plane3, 0, 0);
+ igt_fb_set_size(&d->fb3, d->plane3, d->fb3.width, d->fb3.height);
+ igt_plane_set_position(d->plane3, 0, 0);
+ igt_plane_set_size(d->plane3, d->fb3.width, d->fb3.height);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+ }
+
+ /* 2nd plane nv12 up scaling */
+ igt_fb_set_position(&d->fb2_nv12, d->plane2, 0, 0);
+ igt_fb_set_size(&d->fb2_nv12, d->plane2, d->fb2_nv12.width,
+ d->fb2_nv12.height);
+ igt_plane_set_position(d->plane2, 100, 100);
+ igt_plane_set_size(d->plane2, mode->hdisplay-200, mode->vdisplay-200);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* 2nd plane nv12 down scaling */
+ igt_fb_set_position(&d->fb2_nv12, d->plane2, 0, 0);
+ igt_fb_set_size(&d->fb2_nv12, d->plane2, d->fb2_nv12.width,
+ d->fb2_nv12.height);
+ igt_plane_set_position(d->plane2, 1024, 0);
+ igt_plane_set_size(d->plane2, d->fb2_nv12.width * 2/3,
+ d->fb2_nv12.height * 2/3);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* Back to single plane mode - rgb & no scaling */
+ igt_plane_set_fb(d->plane1, &d->fb1);
+ igt_plane_set_fb(d->plane2, NULL);
+ if (d->num_planes >= 3)
+ igt_plane_set_fb(d->plane3, NULL);
+ igt_fb_set_position(&d->fb1, d->plane1, 0, 0);
+ igt_fb_set_size(&d->fb1, d->plane1, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_position(d->plane1, 0, 0);
+ igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* single plane mode - rgb & scaling */
+ igt_plane_set_rotation(d->plane1, IGT_ROTATION_0);
+ igt_plane_set_fb(d->plane1, &d->fb1);
+ igt_fb_set_position(&d->fb1, d->plane1, 0, 0);
+ igt_fb_set_size(&d->fb1, d->plane1, d->fb1.width/2, d->fb1.height/2);
+ igt_plane_set_position(d->plane1, 0, 0);
+ igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* single plane mode - nv12 & scaling */
+ igt_plane_set_fb(d->plane1, &d->fb1_nv12);
+ igt_fb_set_position(&d->fb1_nv12, d->plane1, 0, 0);
+ igt_fb_set_size(&d->fb1_nv12, d->plane1, d->fb1_nv12.width,
+ d->fb1_nv12.height);
+ igt_plane_set_position(d->plane1, 0, 0);
+ igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ valid_tests++;
+
+ cleanup_crtc(d, output, d->plane1);
+ }
+ igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
+}
+
+static void test_nv12_plane_rotation_90_or_270(data_t *d)
+{
+ igt_display_t *display = &d->display;
+ igt_output_t *output;
+ enum pipe pipe;
+ int valid_tests = 0;
+ int i;
+
+ /*
+ * There are two key scenarios:
+ * 1) Flip landscape buffer onto portrait display
+ * 2) Flip portrait buffer onto landscape display
+ *
+ * Due to availability of landscape display, going with #2.
+ */
+ res_t nv12_res_list[] = {
+ {480, 720},
+ {720, 1280},
+ {1080, 1920},
+ };
+
+ igt_require(d->display.has_universal_planes);
+ igt_require(d->num_scalers);
+
+ for_each_connected_output(display, output) {
+ drmModeModeInfo *mode;
+ mode = igt_output_get_mode(output);
+ pipe = output->config.pipe;
+
+ igt_output_set_pipe(output, pipe);
+
+ /* get planes */
+ d->plane1 = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ d->plane2 = igt_output_get_plane(output, IGT_PLANE_2);
+
+ for (i = 0; i < sizeof(nv12_res_list)/sizeof(res_t); i++) {
+ /* Set up display with plane 1 */
+ igt_plane_set_rotation(d->plane1, IGT_ROTATION_0);
+ prepare_crtc(d, output, pipe, d->plane1, mode, COMMIT_LEGACY);
+
+ /* fb2 is in RGB format */
+ d->fb_id2 = igt_create_fb(d->drm_fd,
+ nv12_res_list[i].width, nv12_res_list[i].height,
+ DRM_FORMAT_XRGB8888,
+ d->tiled,
+ &d->fb2);
+ igt_assert(d->fb_id2);
+
+ /* Change primary plane to fb2 RGB with rotation */
+ igt_plane_set_rotation(d->plane1, d->rotation);
+
+ igt_plane_set_fb(d->plane1, &d->fb2);
+ igt_fb_set_position(&d->fb2, d->plane1, 0, 0);
+ igt_fb_set_size(&d->fb2, d->plane1, d->fb2.width, d->fb2.height);
+ igt_plane_set_position(d->plane1, 0, 0);
+ igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* fb1_nv12 is in NV12 format */
+ d->fb_id1_nv12 = igt_create_fb(d->drm_fd,
+ nv12_res_list[i].width, nv12_res_list[i].height,
+ DRM_FORMAT_NV12,
+ d->tiled,
+ &d->fb1_nv12);
+ igt_assert(d->fb_id1_nv12);
+
+ /* fb2_nv12 is in NV12 format */
+ d->fb_id2_nv12 = igt_create_fb(d->drm_fd,
+ nv12_res_list[i].width, nv12_res_list[i].height,
+ DRM_FORMAT_NV12,
+ d->tiled,
+ &d->fb2_nv12);
+ igt_assert(d->fb_id2_nv12);
+
+ /* set up data in fb1_nv12: fb2 PATTERN RGB-> fb1_nv12 */
+ paint_pattern(d, &d->fb2, d->fb2.width, d->fb2.height);
+ igt_fb_csc_xrgb_to_nv12(d->drm_fd, &d->fb1_nv12, &d->fb2);
+
+ /* set up data in fb2_nv12: fb2 PATTERN RGB-> fb2_nv12 */
+ paint_pattern(d, &d->fb2, d->fb2.width, d->fb2.height);
+ igt_fb_csc_xrgb_to_nv12(d->drm_fd, &d->fb2_nv12, &d->fb2);
+
+ /* set required rotation */
+ igt_plane_set_rotation(d->plane1, d->rotation);
+ igt_plane_set_rotation(d->plane2, d->rotation);
+
+ /* Change primary plane to nv12 full screen: scaling + NV12 */
+ igt_plane_set_fb(d->plane1, &d->fb1_nv12);
+ igt_fb_set_position(&d->fb1_nv12, d->plane1, 0, 0);
+ igt_fb_set_size(&d->fb1_nv12, d->plane1, d->fb1_nv12.width,
+ d->fb1_nv12.height);
+ igt_plane_set_position(d->plane1, 0, 0);
+ igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* 2nd plane nv12 windowed */
+ igt_plane_set_fb(d->plane2, &d->fb2_nv12);
+ igt_fb_set_position(&d->fb2_nv12, d->plane2, 0, 0);
+ igt_fb_set_size(&d->fb2_nv12, d->plane2, d->fb2_nv12.width,
+ d->fb2_nv12.height);
+ igt_plane_set_position(d->plane2, 0, 0);
+ igt_plane_set_size(d->plane2, d->fb2_nv12.height,d->fb2_nv12.width);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* 2nd plane nv12 up scaling */
+ igt_fb_set_position(&d->fb2_nv12, d->plane2, 0, 0);
+ igt_fb_set_size(&d->fb2_nv12, d->plane2, d->fb2_nv12.width,
+ d->fb2_nv12.height);
+ igt_plane_set_position(d->plane2, 100, 100);
+ igt_plane_set_size(d->plane2, mode->hdisplay-200, mode->vdisplay-200);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* 2nd plane nv12 down scaling */
+ igt_fb_set_position(&d->fb2_nv12, d->plane2, 0, 0);
+ igt_fb_set_size(&d->fb2_nv12, d->plane2, d->fb2_nv12.width,
+ d->fb2_nv12.height);
+ igt_plane_set_position(d->plane2, 100, 100);
+ igt_plane_set_size(d->plane2, d->fb2_nv12.height * 2/3,
+ d->fb2_nv12.width * 2/3);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* 2nd plane nv12 down scaling - pan into FB */
+ igt_fb_set_position(&d->fb2_nv12, d->plane2, 100, 100);
+ igt_fb_set_size(&d->fb2_nv12, d->plane2, d->fb2_nv12.width-100,
+ d->fb2_nv12.height-100);
+ igt_plane_set_position(d->plane2, 100, 100);
+ igt_plane_set_size(d->plane2, (d->fb2_nv12.height-100) * 2/3,
+ (d->fb2_nv12.width-100) * 2/3);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* Back to single plane mode - rgb & no scaling */
+ igt_plane_set_rotation(d->plane1, IGT_ROTATION_0);
+ igt_plane_set_fb(d->plane1, &d->fb1);
+ igt_plane_set_fb(d->plane2, NULL);
+ igt_fb_set_position(&d->fb1, d->plane1, 0, 0);
+ igt_fb_set_size(&d->fb1, d->plane1, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_position(d->plane1, 0, 0);
+ igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ igt_remove_fb(d->drm_fd, &d->fb2);
+ igt_remove_fb(d->drm_fd, &d->fb2_nv12);
+ igt_remove_fb(d->drm_fd, &d->fb1_nv12);
+ d->fb_id2 = 0;
+ d->fb_id2_nv12 = 0;
+ d->fb_id1_nv12 = 0;
+ }
+
+ valid_tests++;
+
+ cleanup_crtc(d, output, d->plane1);
+ }
+ igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
+}
+
+static void test_nv12_unsupported_plane(data_t *d)
+{
+ igt_display_t *display = &d->display;
+ igt_output_t *output;
+ enum pipe pipe;
+ int valid_tests = 0;
+
+ igt_require(d->display.has_universal_planes);
+ igt_require(d->num_scalers);
+ igt_require(d->num_planes >= 3);
+
+ for_each_connected_output(display, output) {
+ drmModeModeInfo *mode;
+ mode = igt_output_get_mode(output);
+ pipe = output->config.pipe;
+
+ igt_output_set_pipe(output, pipe);
+
+ d->fb_id3_nv12 = igt_create_fb(d->drm_fd,
+ 1920, 1080,
+ DRM_FORMAT_NV12,
+ d->tiled,
+ &d->fb3_nv12);
+ igt_assert(d->fb_id3_nv12);
+
+ /* Set up fb3_nv12->plane3 mapping. */
+ d->plane3 = igt_output_get_plane(output, IGT_PLANE_3);
+ igt_plane_set_fb(d->plane3, &d->fb3_nv12);
+
+ /* 3rd plane nv12 windowed - no scaling */
+ igt_fb_set_position(&d->fb3_nv12, d->plane3, 0, 0);
+ igt_fb_set_size(&d->fb3_nv12, d->plane3, d->fb3_nv12.width,
+ d->fb3_nv12.height);
+ igt_plane_set_position(d->plane3, 0, 0);
+ igt_plane_set_size(d->plane3, d->fb3_nv12.width, d->fb3_nv12.height);
+
+ /* Should fail because NV12 is not supported on plane 3 */
+ igt_assert(igt_display_try_commit2(display, COMMIT_UNIVERSAL)
+ == -EINVAL);
+
+ valid_tests++;
+
+ igt_plane_set_fb(d->plane3, NULL);
+ cleanup_crtc(d, output, d->plane1);
+ }
+ igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
+}
+
+static void test_nv12_invalid_fb_params(data_t *d)
+{
+ igt_display_t *display = &d->display;
+ igt_output_t *output;
+ enum pipe pipe;
+ int valid_tests = 0;
+
+ igt_require(d->display.has_universal_planes);
+ igt_require(d->num_scalers);
+
+ for_each_connected_output(display, output) {
+ struct local_drm_mode_fb_cmd2 f;
+ int fd = d->drm_fd;
+ drmModeModeInfo *mode;
+
+ mode = igt_output_get_mode(output);
+ pipe = output->config.pipe;
+
+ igt_output_set_pipe(output, pipe);
+
+ /* Set up display with plane 1 */
+ d->plane1 = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ igt_plane_set_rotation(d->plane1, IGT_ROTATION_0);
+
+ /* use igt helper to create bo and addfb tile-Yf, this should pass */
+ d->fb_id1_nv12 = igt_create_fb(d->drm_fd,
+ 1920, 1080,
+ DRM_FORMAT_NV12,
+ LOCAL_I915_FORMAT_MOD_Yf_TILED,
+ &d->fb1_nv12);
+ igt_assert(d->fb_id1_nv12);
+
+ /* now remove fb but keep bo to redo addfb */
+ drmModeRmFB(d->drm_fd, d->fb_id1_nv12);
+
+ /* redo AddFB */
+ memset(&f, 0, sizeof(f));
+
+ f.width = d->fb1_nv12.width;
+ f.height = d->fb1_nv12.height;
+ f.pixel_format = d->fb1_nv12.drm_format;
+ f.flags = LOCAL_DRM_MODE_FB_MODIFIERS;
+ f.handles[0] = d->fb1_nv12.gem_handle;
+ f.pitches[0] = d->fb1_nv12.stride;
+ f.modifier[0] = LOCAL_I915_FORMAT_MOD_Yf_TILED;
+ f.modifier[1] = LOCAL_I915_FORMAT_MOD_Yf_TILED;
+
+ /* test invalid uv start */
+ f.handles[1] = d->fb1_nv12.gem_handle;
+ f.pitches[1] = d->fb1_nv12.stride;
+ f.offsets[1] = 0; /* invalid uv start */
+ igt_assert(drmIoctl(fd, LOCAL_DRM_IOCTL_MODE_ADDFB2, &f) != 0);
+
+ /* test uv pitch != y pitch */
+ f.handles[1] = d->fb1_nv12.gem_handle;
+ f.pitches[1] = d->fb1_nv12.stride + 1; /* invalid pitch */
+ f.offsets[1] = d->fb1_nv12.uv_offset;
+ igt_assert(drmIoctl(fd, LOCAL_DRM_IOCTL_MODE_ADDFB2, &f) != 0);
+
+ /* test uv gem handle != y gem handle */
+ f.handles[1] = 0xFFFFFFFF; /* invalid gem handle */
+ f.pitches[1] = d->fb1_nv12.stride;
+ f.offsets[1] = d->fb1_nv12.uv_offset;
+ igt_assert(drmIoctl(fd, LOCAL_DRM_IOCTL_MODE_ADDFB2, &f) != 0);
+
+ /* test uv offset not aligned to new tile-row */
+ f.handles[1] = d->fb1_nv12.gem_handle;
+ f.pitches[1] = d->fb1_nv12.stride;
+ f.offsets[1] = d->fb1_nv12.uv_offset + 0xFF; /* not tile-row aligned */
+ igt_assert(drmIoctl(fd, LOCAL_DRM_IOCTL_MODE_ADDFB2, &f) != 0);
+
+ /* valid params */
+ f.handles[1] = d->fb1_nv12.gem_handle;
+ f.pitches[1] = d->fb1_nv12.stride;
+ f.offsets[1] = d->fb1_nv12.uv_offset;
+ igt_assert(drmIoctl(fd, LOCAL_DRM_IOCTL_MODE_ADDFB2, &f) == 0);
+
+ /* Free fb */
+ igt_remove_fb(d->drm_fd, &d->fb1_nv12);
+ d->fb_id1_nv12 = 0;
+
+ /* recreate bo and addfb in tile-Y, this should pass */
+ d->fb_id1_nv12 = igt_create_fb(d->drm_fd,
+ 1920, 1080,
+ DRM_FORMAT_NV12,
+ LOCAL_I915_FORMAT_MOD_Y_TILED,
+ &d->fb1_nv12);
+ igt_assert(d->fb_id1_nv12);
+
+ /* now remove fb but keep bo to redo addfb */
+ drmModeRmFB(d->drm_fd, d->fb_id1_nv12);
+
+ /* redo AddFB */
+ memset(&f, 0, sizeof(f));
+
+ f.width = d->fb1_nv12.width;
+ f.height = d->fb1_nv12.height;
+ f.pixel_format = d->fb1_nv12.drm_format;
+ f.flags = LOCAL_DRM_MODE_FB_MODIFIERS;
+ f.handles[0] = d->fb1_nv12.gem_handle;
+ f.pitches[0] = d->fb1_nv12.stride;
+ f.modifier[0] = LOCAL_I915_FORMAT_MOD_Y_TILED;
+ f.handles[1] = d->fb1_nv12.gem_handle;
+ f.pitches[1] = d->fb1_nv12.stride;
+ f.modifier[1] = LOCAL_I915_FORMAT_MOD_Y_TILED;
+
+ /* test uv offset not 4-line aligned */
+ f.offsets[1] = d->fb1_nv12.uv_offset + f.pitches[1]; /* not 4-ln align*/
+ igt_assert(drmIoctl(fd, LOCAL_DRM_IOCTL_MODE_ADDFB2, &f) != 0);
+
+ /* valid params */
+ f.offsets[1] = d->fb1_nv12.uv_offset;
+ igt_assert(drmIoctl(fd, LOCAL_DRM_IOCTL_MODE_ADDFB2, &f) == 0);
+
+ valid_tests++;
+
+ cleanup_crtc(d, output, d->plane1);
+ }
+ igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
+}
+
+igt_main
+{
+ data_t data = {};
+ igt_skip_on_simulation();
+
+ igt_fixture {
+ data.drm_fd = drm_open_any();
+
+ kmstest_set_vt_graphics_mode();
+
+ igt_display_init(&data.display, data.drm_fd);
+
+ devid = intel_get_drm_devid(data.drm_fd);
+ data.num_scalers = intel_gen(devid) >= 9 ? 2 : 0;
+ data.num_planes = 2;
+ igt_assert(intel_gen(devid) >= 9);
+ }
+
+ data.rotation = IGT_ROTATION_0;
+ igt_subtest_f("nv12-plane-linear") {
+ data.tiled = LOCAL_DRM_FORMAT_MOD_NONE;
+ test_nv12_plane(&data);
+ }
+ igt_subtest_f("nv12-plane-tile-x") {
+ data.tiled = LOCAL_I915_FORMAT_MOD_X_TILED;
+ test_nv12_plane(&data);
+ }
+ igt_subtest_f("nv12-plane-tile-y") {
+ data.tiled = LOCAL_I915_FORMAT_MOD_Y_TILED;
+ test_nv12_plane(&data);
+ }
+
+ data.rotation = IGT_ROTATION_180;
+ igt_subtest_f("nv12-plane-linear-rot-180") {
+ data.tiled = LOCAL_DRM_FORMAT_MOD_NONE;
+ test_nv12_plane(&data);
+ }
+ igt_subtest_f("nv12-plane-tile-x-rot-180") {
+ data.tiled = LOCAL_I915_FORMAT_MOD_X_TILED;
+ test_nv12_plane(&data);
+ }
+ igt_subtest_f("nv12-plane-tile-y-rot-180") {
+ data.tiled = LOCAL_I915_FORMAT_MOD_Y_TILED;
+ test_nv12_plane(&data);
+ }
+
+ data.rotation = IGT_ROTATION_90;
+ igt_subtest_f("nv12-plane-tile-y-rot-90") {
+ data.tiled = LOCAL_I915_FORMAT_MOD_Y_TILED;
+ test_nv12_plane_rotation_90_or_270(&data);
+ }
+
+ data.rotation = IGT_ROTATION_270;
+ igt_subtest_f("nv12-plane-tile-y-rot-270") {
+ data.tiled = LOCAL_I915_FORMAT_MOD_Y_TILED;
+ test_nv12_plane_rotation_90_or_270(&data);
+ }
+
+ igt_subtest_f("nv12-on-unsupported-plane") {
+ data.tiled = LOCAL_I915_FORMAT_MOD_Yf_TILED;
+ test_nv12_unsupported_plane(&data);
+ }
+
+ igt_subtest_f("nv12-invalid-fb-params") {
+ data.tiled = LOCAL_I915_FORMAT_MOD_Yf_TILED;
+ test_nv12_invalid_fb_params(&data);
+ }
+
+ igt_fixture {
+ igt_display_fini(&data.display);
+ }
+}
--
1.9.1
More information about the Intel-gfx
mailing list