[Intel-gfx] [PATCH 6/6] drm/i915/bxt: Fix irq_port for eDP

[Rodrigo Vivi]

Nak: I don't believe we need this... Actually I believe we need the
opposite... we need to enable HPD on port A for eDP errors handling...




On Fri, Sep 4, 2015 at 6:38 AM Sonika Jindal <sonika.jindal at intel.com>
wrote:

> From: Durgadoss R <durgadoss.r at intel.com>
>
> Currently, HDMI hotplug with eDP as local panel is failing
> because the HDMI hpd is detected as a long hpd for eDP; and is
> thus rightfully ignored. But, it should really be handled as
> an interrupt on port B for HDMI (due to BXT A1 platform having
> HPD pins A and B swapped). This patch sets the irq_port[PORT_A]
> to NULL in case eDP is on port A so that irq handler does not
> treat it as a 'dig_port' interrupt.
>
> Signed-off-by: Durgadoss R <durgadoss.r at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_ddi.c |   15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> index 4823184..fec51df 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -3218,15 +3218,20 @@ void intel_ddi_init(struct drm_device *dev, enum
> port port)
>                         goto err;
>
>                 intel_dig_port->hpd_pulse = intel_dp_hpd_pulse;
> +               dev_priv->hotplug.irq_port[port] = intel_dig_port;
>                 /*
>                  * On BXT A0/A1, sw needs to activate DDIA HPD logic and
>                  * interrupts to check the external panel connection.
> +                * If eDP is connected on port A, set irq_port to NULL
> +                * so that we do not assume an interrupt here as a
> +                * 'dig_port' interrupt.
>                  */
> -               if (IS_BROXTON(dev_priv) && (INTEL_REVID(dev) <
> BXT_REVID_B0)
> -                                        && port == PORT_B)
> -                       dev_priv->hotplug.irq_port[PORT_A] =
> intel_dig_port;
> -               else
> -                       dev_priv->hotplug.irq_port[port] = intel_dig_port;
> +               if (IS_BROXTON(dev) && (INTEL_REVID(dev) < BXT_REVID_B0)) {
> +                       if (port == PORT_B)
> +                               dev_priv->hotplug.irq_port[PORT_A] =
> intel_dig_port;
> +                       else if (intel_encoder->type == INTEL_OUTPUT_EDP)
> +                               dev_priv->hotplug.irq_port[port] = NULL;
> +               }
>         }
>
>         /* In theory we don't need the encoder->type check, but leave it
> just in
> --
> 1.7.10.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20150909/9d6c529f/attachment.html>