[Intel-gfx] [RFC PATCH] drm/i915/skl: Add DC6 disabling as a power well
Patrik Jakobsson
patrik.jakobsson at linux.intel.com
Fri Sep 11 04:55:22 PDT 2015
We need to be able to control if DC6 is allowed or not. Much like
requesting power to a specific piece of the hardware we need to be able
to request that we don't enter DC6 during certain hw access.
To solve this without introducing too much infrastructure I'm hooking
into the power well / power domain framework. DC6 prevention is modeled
much like an enabled power well. Thus I'm using the terminology on/off
for DC states instead of enable/disable.
The problem that started this work is the need for DC6 to be disabled
when accessing DP_AUX_A during CRTC on/off. That is also fixed in this
patch.
This is posted as an RFC since DMC and DC state handling is being
reworked and will possibly affect the outcome of this patch. The patch
has known warnings.
Signed-off-by: Patrik Jakobsson <patrik.jakobsson at linux.intel.com>
---
drivers/gpu/drm/i915/intel_ddi.c | 9 +++++
drivers/gpu/drm/i915/intel_drv.h | 2 +
drivers/gpu/drm/i915/intel_runtime_pm.c | 69 +++++++++++++++++++++++++--------
3 files changed, 64 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 4823184..c2c1ad2 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -2288,6 +2288,8 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+ intel_display_power_get(dev_priv, POWER_DOMAIN_AUX_A);
+
intel_dp_set_link_params(intel_dp, crtc->config);
intel_ddi_init_dp_buf_reg(intel_encoder);
@@ -2297,6 +2299,8 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
intel_dp_complete_link_train(intel_dp);
if (port != PORT_A || INTEL_INFO(dev)->gen >= 9)
intel_dp_stop_link_train(intel_dp);
+
+ intel_display_power_put(dev_priv, POWER_DOMAIN_AUX_A);
} else if (type == INTEL_OUTPUT_HDMI) {
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
@@ -2339,9 +2343,14 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ intel_display_power_get(dev_priv, POWER_DOMAIN_AUX_A);
+
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
intel_edp_panel_vdd_on(intel_dp);
intel_edp_panel_off(intel_dp);
+
+ intel_display_power_put(dev_priv, POWER_DOMAIN_AUX_A);
}
if (IS_SKYLAKE(dev))
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 46484e4..82489ad 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1367,6 +1367,8 @@ void chv_phy_powergate_lanes(struct intel_encoder *encoder,
bool override, unsigned int mask);
bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy,
enum dpio_channel ch, bool override);
+void skl_enable_dc6(struct drm_i915_private *dev_priv);
+void skl_disable_dc6(struct drm_i915_private *dev_priv);
/* intel_pm.c */
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 3f682a1..e30c9a6 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -335,6 +335,10 @@ static void hsw_set_power_well(struct drm_i915_private *dev_priv,
SKL_DISPLAY_POWERWELL_1_POWER_DOMAINS | \
BIT(POWER_DOMAIN_PLLS) | \
BIT(POWER_DOMAIN_INIT))
+#define SKL_DISPLAY_DC6_OFF_POWER_DOMAINS ( \
+ SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
+ BIT(POWER_DOMAIN_AUX_A))
+
#define SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS ( \
(POWER_DOMAIN_MASK & ~(SKL_DISPLAY_POWERWELL_1_POWER_DOMAINS | \
SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
@@ -550,7 +554,7 @@ static void assert_can_disable_dc6(struct drm_i915_private *dev_priv)
"DC6 already programmed to be disabled.\n");
}
-static void skl_enable_dc6(struct drm_i915_private *dev_priv)
+void skl_enable_dc6(struct drm_i915_private *dev_priv)
{
uint32_t val;
@@ -567,7 +571,7 @@ static void skl_enable_dc6(struct drm_i915_private *dev_priv)
POSTING_READ(DC_STATE_EN);
}
-static void skl_disable_dc6(struct drm_i915_private *dev_priv)
+void skl_disable_dc6(struct drm_i915_private *dev_priv)
{
uint32_t val;
@@ -628,10 +632,8 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
!I915_READ(HSW_PWR_WELL_BIOS),
"Invalid for power well status to be enabled, unless done by the BIOS, \
when request is to disable!\n");
- if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
- power_well->data == SKL_DISP_PW_2) {
+ if (power_well->data == SKL_DISP_PW_2) {
if (SKL_ENABLE_DC6(dev)) {
- skl_disable_dc6(dev_priv);
/*
* DDI buffer programming unnecessary during driver-load/resume
* as it's already done during modeset initialization then.
@@ -639,10 +641,9 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
*/
if (!dev_priv->power_domains.initializing)
intel_prepare_ddi(dev);
- } else {
- gen9_disable_dc5(dev_priv);
}
}
+
I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
}
@@ -660,8 +661,7 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
POSTING_READ(HSW_PWR_WELL_DRIVER);
DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
- if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
- power_well->data == SKL_DISP_PW_2) {
+ if (power_well->data == SKL_DISP_PW_2) {
enum csr_state state;
/* TODO: wait for a completion event or
* similar here instead of busy
@@ -669,14 +669,10 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
*/
wait_for((state = intel_csr_load_status_get(dev_priv)) !=
FW_UNINITIALIZED, 1000);
- if (state != FW_LOADED)
+ if (state != FW_LOADED) {
DRM_ERROR("CSR firmware not ready (%d)\n",
- state);
- else
- if (SKL_ENABLE_DC6(dev))
- skl_enable_dc6(dev_priv);
- else
- gen9_enable_dc5(dev_priv);
+ state);
+ }
}
}
}
@@ -752,6 +748,34 @@ static void skl_power_well_disable(struct drm_i915_private *dev_priv,
skl_set_power_well(dev_priv, power_well, false);
}
+static bool skl_dc6_state_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ /* Return true if disabling of DC6 is enabled */
+ return !(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6);
+}
+
+static void skl_dc6_state_on(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ skl_enable_dc6(dev_priv);
+}
+
+static void skl_dc6_state_off(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ skl_disable_dc6(dev_priv);
+}
+
+static void skl_dc6_sync_hw(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ if (power_well->count > 0)
+ skl_disable_dc6(dev_priv);
+ else
+ skl_enable_dc6(dev_priv);
+}
+
static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
{
@@ -1546,6 +1570,14 @@ static const struct i915_power_well_ops skl_power_well_ops = {
.is_enabled = skl_power_well_enabled,
};
+static const struct i915_power_well_ops skl_dc_state_ops = {
+ .sync_hw = skl_dc6_sync_hw,
+ /* To enable power we turn the DC state off */
+ .enable = skl_dc6_state_off,
+ .disable = skl_dc6_state_on,
+ .is_enabled = skl_dc6_state_enabled,
+};
+
static struct i915_power_well hsw_power_wells[] = {
{
.name = "always-on",
@@ -1745,6 +1777,11 @@ static struct i915_power_well skl_power_wells[] = {
.ops = &skl_power_well_ops,
.data = SKL_DISP_PW_DDI_D,
},
+ {
+ .name = "DC6 state off",
+ .domains = SKL_DISPLAY_DC6_OFF_POWER_DOMAINS,
+ .ops = &skl_power_well_ops,
+ },
};
static struct i915_power_well bxt_power_wells[] = {
--
2.1.4
More information about the Intel-gfx
mailing list