[Intel-gfx] [RFC PATCH] drm/i915/skl: Add DC6 disabling as a power well

Patrik Jakobsson patrik.jakobsson at linux.intel.com
Mon Sep 14 03:35:38 PDT 2015


On Mon, Sep 14, 2015 at 11:50:29AM +0200, Daniel Vetter wrote:
> On Fri, Sep 11, 2015 at 01:55:22PM +0200, Patrik Jakobsson wrote:
> > We need to be able to control if DC6 is allowed or not. Much like
> > requesting power to a specific piece of the hardware we need to be able
> > to request that we don't enter DC6 during certain hw access.
> > 
> > To solve this without introducing too much infrastructure I'm hooking
> > into the power well / power domain framework. DC6 prevention is modeled
> > much like an enabled power well. Thus I'm using the terminology on/off
> > for DC states instead of enable/disable.
> > 
> > The problem that started this work is the need for DC6 to be disabled
> > when accessing DP_AUX_A during CRTC on/off. That is also fixed in this
> > patch.
> > 
> > This is posted as an RFC since DMC and DC state handling is being
> > reworked and will possibly affect the outcome of this patch. The patch
> > has known warnings.
> > 
> > Signed-off-by: Patrik Jakobsson <patrik.jakobsson at linux.intel.com>
> 
> Despite the naming suggesting its for power wells only this is exactly
> what the power well infrastructure is meant for: It's just our in-house
> struct power_domain for display runtime pm: They're hierachical and and
> refcounted with get/put. So from that pov lgtm.
> 
> But please cc the people working on the other dmc patches and coordinate
> with them.
> -Daniel

Great. We probably need a few patches from Ville for getting the correct aux
(A/B/C/D) in a nice way. Don't think they are on the list. I'll bundle those
patches when sending out the proper version of this patch.

Also, bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91876

CCed Damien, Ville and Animesh

-Patrik

> > ---
> >  drivers/gpu/drm/i915/intel_ddi.c        |  9 +++++
> >  drivers/gpu/drm/i915/intel_drv.h        |  2 +
> >  drivers/gpu/drm/i915/intel_runtime_pm.c | 69 +++++++++++++++++++++++++--------
> >  3 files changed, 64 insertions(+), 16 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> > index 4823184..c2c1ad2 100644
> > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > @@ -2288,6 +2288,8 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
> >  	if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
> >  		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> >  
> > +		intel_display_power_get(dev_priv, POWER_DOMAIN_AUX_A);
> > +
> >  		intel_dp_set_link_params(intel_dp, crtc->config);
> >  
> >  		intel_ddi_init_dp_buf_reg(intel_encoder);
> > @@ -2297,6 +2299,8 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
> >  		intel_dp_complete_link_train(intel_dp);
> >  		if (port != PORT_A || INTEL_INFO(dev)->gen >= 9)
> >  			intel_dp_stop_link_train(intel_dp);
> > +
> > +		intel_display_power_put(dev_priv, POWER_DOMAIN_AUX_A);
> >  	} else if (type == INTEL_OUTPUT_HDMI) {
> >  		struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
> >  
> > @@ -2339,9 +2343,14 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
> >  
> >  	if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
> >  		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> > +
> > +		intel_display_power_get(dev_priv, POWER_DOMAIN_AUX_A);
> > +
> >  		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
> >  		intel_edp_panel_vdd_on(intel_dp);
> >  		intel_edp_panel_off(intel_dp);
> > +
> > +		intel_display_power_put(dev_priv, POWER_DOMAIN_AUX_A);
> >  	}
> >  
> >  	if (IS_SKYLAKE(dev))
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 46484e4..82489ad 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1367,6 +1367,8 @@ void chv_phy_powergate_lanes(struct intel_encoder *encoder,
> >  			     bool override, unsigned int mask);
> >  bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy,
> >  			  enum dpio_channel ch, bool override);
> > +void skl_enable_dc6(struct drm_i915_private *dev_priv);
> > +void skl_disable_dc6(struct drm_i915_private *dev_priv);
> >  
> >  
> >  /* intel_pm.c */
> > diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > index 3f682a1..e30c9a6 100644
> > --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > @@ -335,6 +335,10 @@ static void hsw_set_power_well(struct drm_i915_private *dev_priv,
> >  	SKL_DISPLAY_POWERWELL_1_POWER_DOMAINS |		\
> >  	BIT(POWER_DOMAIN_PLLS) |			\
> >  	BIT(POWER_DOMAIN_INIT))
> > +#define SKL_DISPLAY_DC6_OFF_POWER_DOMAINS (		\
> > +	SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS |		\
> > +	BIT(POWER_DOMAIN_AUX_A))
> > +
> >  #define SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS (		\
> >  	(POWER_DOMAIN_MASK & ~(SKL_DISPLAY_POWERWELL_1_POWER_DOMAINS |	\
> >  	SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS |		\
> > @@ -550,7 +554,7 @@ static void assert_can_disable_dc6(struct drm_i915_private *dev_priv)
> >  		"DC6 already programmed to be disabled.\n");
> >  }
> >  
> > -static void skl_enable_dc6(struct drm_i915_private *dev_priv)
> > +void skl_enable_dc6(struct drm_i915_private *dev_priv)
> >  {
> >  	uint32_t val;
> >  
> > @@ -567,7 +571,7 @@ static void skl_enable_dc6(struct drm_i915_private *dev_priv)
> >  	POSTING_READ(DC_STATE_EN);
> >  }
> >  
> > -static void skl_disable_dc6(struct drm_i915_private *dev_priv)
> > +void skl_disable_dc6(struct drm_i915_private *dev_priv)
> >  {
> >  	uint32_t val;
> >  
> > @@ -628,10 +632,8 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
> >  				!I915_READ(HSW_PWR_WELL_BIOS),
> >  				"Invalid for power well status to be enabled, unless done by the BIOS, \
> >  				when request is to disable!\n");
> > -			if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
> > -				power_well->data == SKL_DISP_PW_2) {
> > +			if (power_well->data == SKL_DISP_PW_2) {
> >  				if (SKL_ENABLE_DC6(dev)) {
> > -					skl_disable_dc6(dev_priv);
> >  					/*
> >  					 * DDI buffer programming unnecessary during driver-load/resume
> >  					 * as it's already done during modeset initialization then.
> > @@ -639,10 +641,9 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
> >  					 */
> >  					if (!dev_priv->power_domains.initializing)
> >  						intel_prepare_ddi(dev);
> > -				} else {
> > -					gen9_disable_dc5(dev_priv);
> >  				}
> >  			}
> > +
> >  			I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
> >  		}
> >  
> > @@ -660,8 +661,7 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
> >  			POSTING_READ(HSW_PWR_WELL_DRIVER);
> >  			DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
> >  
> > -			if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
> > -				power_well->data == SKL_DISP_PW_2) {
> > +			if (power_well->data == SKL_DISP_PW_2) {
> >  				enum csr_state state;
> >  				/* TODO: wait for a completion event or
> >  				 * similar here instead of busy
> > @@ -669,14 +669,10 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
> >  				 */
> >  				wait_for((state = intel_csr_load_status_get(dev_priv)) !=
> >  						FW_UNINITIALIZED, 1000);
> > -				if (state != FW_LOADED)
> > +				if (state != FW_LOADED) {
> >  					DRM_ERROR("CSR firmware not ready (%d)\n",
> > -							state);
> > -				else
> > -					if (SKL_ENABLE_DC6(dev))
> > -						skl_enable_dc6(dev_priv);
> > -					else
> > -						gen9_enable_dc5(dev_priv);
> > +						  state);
> > +				}
> >  			}
> >  		}
> >  	}
> > @@ -752,6 +748,34 @@ static void skl_power_well_disable(struct drm_i915_private *dev_priv,
> >  	skl_set_power_well(dev_priv, power_well, false);
> >  }
> >  
> > +static bool skl_dc6_state_enabled(struct drm_i915_private *dev_priv,
> > +				  struct i915_power_well *power_well)
> > +{
> > +	/* Return true if disabling of DC6 is enabled */
> > +	return !(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6);
> > +}
> > +
> > +static void skl_dc6_state_on(struct drm_i915_private *dev_priv,
> > +			     struct i915_power_well *power_well)
> > +{
> > +	skl_enable_dc6(dev_priv);
> > +}
> > +
> > +static void skl_dc6_state_off(struct drm_i915_private *dev_priv,
> > +			      struct i915_power_well *power_well)
> > +{
> > +	skl_disable_dc6(dev_priv);
> > +}
> > +
> > +static void skl_dc6_sync_hw(struct drm_i915_private *dev_priv,
> > +			    struct i915_power_well *power_well)
> > +{
> > +	if (power_well->count > 0)
> > +		skl_disable_dc6(dev_priv);
> > +	else
> > +		skl_enable_dc6(dev_priv);
> > +}
> > +
> >  static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv,
> >  					   struct i915_power_well *power_well)
> >  {
> > @@ -1546,6 +1570,14 @@ static const struct i915_power_well_ops skl_power_well_ops = {
> >  	.is_enabled = skl_power_well_enabled,
> >  };
> >  
> > +static const struct i915_power_well_ops skl_dc_state_ops = {
> > +	.sync_hw = skl_dc6_sync_hw,
> > +	/* To enable power we turn the DC state off */
> > +	.enable = skl_dc6_state_off,
> > +	.disable = skl_dc6_state_on,
> > +	.is_enabled = skl_dc6_state_enabled,
> > +};
> > +
> >  static struct i915_power_well hsw_power_wells[] = {
> >  	{
> >  		.name = "always-on",
> > @@ -1745,6 +1777,11 @@ static struct i915_power_well skl_power_wells[] = {
> >  		.ops = &skl_power_well_ops,
> >  		.data = SKL_DISP_PW_DDI_D,
> >  	},
> > +	{
> > +		.name = "DC6 state off",
> > +		.domains = SKL_DISPLAY_DC6_OFF_POWER_DOMAINS,
> > +		.ops = &skl_power_well_ops,
> > +	},
> >  };
> >  
> >  static struct i915_power_well bxt_power_wells[] = {
> > -- 
> > 2.1.4
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch


More information about the Intel-gfx mailing list