[Intel-gfx] [PATCH 4/4] drm/i915: Program vactive & hactive display size for both ports

[Ville Syrjälä]

On Wed, Sep 16, 2015 at 02:48:41PM +0530, Gaurav K Singh wrote:
> Program the required mmio regs for hactive and vactive display size.

This doesn't program anything, just reads them out.

As for readout, do the pipe registers contain the same values? In that
case we could just do a sanity check to make sure the DSI and pipe
registers match.

> 
> Signed-off-by: Gaurav K Singh <gaurav.k.singh at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_display.c |   37 ++++++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index ab9f06a..0285af9 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -7653,6 +7653,7 @@ static void intel_get_pipe_timings(struct intel_crtc *crtc,
>  	struct drm_device *dev = crtc->base.dev;
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
> +	bool is_dsi = intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI);
>  	uint32_t tmp;
>  
>  	tmp = I915_READ(HTOTAL(cpu_transcoder));
> @@ -7681,6 +7682,25 @@ static void intel_get_pipe_timings(struct intel_crtc *crtc,
>  		pipe_config->base.adjusted_mode.crtc_vblank_end += 1;
>  	}
>  
> +	 if (IS_BROXTON(dev) && is_dsi) {
> +		struct intel_encoder *encoder;
> +
> +		for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
> +			struct intel_dsi *intel_dsi =
> +				enc_to_intel_dsi(&encoder->base);
> +			enum port port;
> +
> +			for_each_dsi_port(port, intel_dsi->ports) {
> +				pipe_config->base.adjusted_mode.crtc_hdisplay =
> +						I915_READ(BXT_MIPI_TRANS_HACTIVE(port));
> +				pipe_config->base.adjusted_mode.crtc_vdisplay =
> +						I915_READ(BXT_MIPI_TRANS_VACTIVE(port));
> +				pipe_config->base.adjusted_mode.crtc_vtotal =
> +						I915_READ(BXT_MIPI_TRANS_VTOTAL(port));
> +			}
> +		}
> +	}
> +
>  	tmp = I915_READ(PIPESRC(crtc->pipe));
>  	pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
>  	pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
> @@ -10569,6 +10589,7 @@ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
>  	int vtot = I915_READ(VTOTAL(cpu_transcoder));
>  	int vsync = I915_READ(VSYNC(cpu_transcoder));
>  	enum pipe pipe = intel_crtc->pipe;
> +	bool is_dsi = intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DSI);
>  
>  	mode = kzalloc(sizeof(*mode), GFP_KERNEL);
>  	if (!mode)
> @@ -10598,6 +10619,22 @@ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
>  	mode->vsync_start = (vsync & 0xffff) + 1;
>  	mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
>  
> +	if (IS_BROXTON(dev) && is_dsi) {
> +		struct intel_encoder *encoder;
> +
> +		for_each_encoder_on_crtc(dev, &intel_crtc->base, encoder) {
> +			struct intel_dsi *intel_dsi =
> +						enc_to_intel_dsi(&encoder->base);
> +			enum port port;
> +
> +			for_each_dsi_port(port, intel_dsi->ports) {
> +				mode->vtotal = I915_READ(BXT_MIPI_TRANS_VTOTAL(port));
> +				mode->hdisplay = I915_READ(BXT_MIPI_TRANS_HACTIVE(port));
> +				mode->vdisplay = I915_READ(BXT_MIPI_TRANS_VACTIVE(port));
> +			}
> +		}
> +	}
> +
>  	drm_mode_set_name(mode);
>  
>  	return mode;
> -- 
> 1.7.9.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC