[Intel-gfx] [MIPI SEQ PARSING v2 PATCH 04/11] drm/i915: Using the approprite vbt size if vbt is not in mailbox4 of opregion
Jani Nikula
jani.nikula at linux.intel.com
Thu Sep 17 05:18:26 PDT 2015
On Thu, 10 Sep 2015, Deepak M <m.deepak at intel.com> wrote:
> Currently the field in bdb header which indicates the VBT size
> is of 2 bytes, but there are some cases where VBT size exceeds
> 64KB in which case this field may not contain the correct VBT size.
> So its better to get the VBT size from the mailbox3 if
> VBT is not present in the mailbox4 of opregion.
>
> v2: - Use opregion filed from dev_priv struct instead of creating
> a new field in dev_priv (Jani)
> - Have vbt_size field vaild in all scenarios (Jani)
> - rebase
>
> Signed-off-by: Deepak M <m.deepak at intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 2 ++
> drivers/gpu/drm/i915/intel_bios.c | 42 +++++++++++++++++++--------------
> drivers/gpu/drm/i915/intel_opregion.c | 6 +++++
> 3 files changed, 32 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 507d57a..91ccbc6 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1777,6 +1777,8 @@ struct drm_i915_private {
> u32 pm_rps_events;
> u32 pipestat_irq_mask[I915_MAX_PIPES];
>
> + u32 vbt_size;
No. dev_priv is not a random area to throw things into. The place you're
looking for is dev_priv->opregion, i.e. struct intel_opregion.
> +
> struct i915_hotplug hotplug;
> struct i915_fbc fbc;
> struct i915_drrs drrs;
> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> index 1932a86..34a1042 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -37,17 +37,19 @@
> static int panel_type;
>
> static const void *
> -find_section(const void *_bdb, int section_id)
> +find_section(struct drm_i915_private *dev_priv,
> + const void *_bdb, int section_id)
> {
> const struct bdb_header *bdb = _bdb;
> const u8 *base = _bdb;
> int index = 0;
> - u16 total, current_size;
> + u32 total, current_size;
> u8 current_id;
>
> /* skip to first section */
> index += bdb->header_size;
> - total = bdb->bdb_size;
> +
> + total = dev_priv->vbt_size;
vbt_size != bdb_size. See below.
>
> /* walk the sections looking for section_id */
> while (index + 3 < total) {
> @@ -179,7 +181,7 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
> struct drm_display_mode *panel_fixed_mode;
> int drrs_mode;
>
> - lvds_options = find_section(bdb, BDB_LVDS_OPTIONS);
> + lvds_options = find_section(dev_priv, bdb, BDB_LVDS_OPTIONS);
> if (!lvds_options)
> return;
>
> @@ -211,11 +213,12 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
> break;
> }
>
> - lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
> + lvds_lfp_data = find_section(dev_priv, bdb, BDB_LVDS_LFP_DATA);
> if (!lvds_lfp_data)
> return;
>
> - lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS);
> + lvds_lfp_data_ptrs = find_section(dev_priv, bdb,
> + BDB_LVDS_LFP_DATA_PTRS);
> if (!lvds_lfp_data_ptrs)
> return;
>
> @@ -257,7 +260,7 @@ parse_lfp_backlight(struct drm_i915_private *dev_priv,
> const struct bdb_lfp_backlight_data *backlight_data;
> const struct bdb_lfp_backlight_data_entry *entry;
>
> - backlight_data = find_section(bdb, BDB_LVDS_BACKLIGHT);
> + backlight_data = find_section(dev_priv, bdb, BDB_LVDS_BACKLIGHT);
> if (!backlight_data)
> return;
>
> @@ -305,14 +308,15 @@ parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
> if (index == -1) {
> const struct bdb_sdvo_lvds_options *sdvo_lvds_options;
>
> - sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS);
> + sdvo_lvds_options = find_section(dev_priv, bdb,
> + BDB_SDVO_LVDS_OPTIONS);
> if (!sdvo_lvds_options)
> return;
>
> index = sdvo_lvds_options->panel_type;
> }
>
> - dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS);
> + dvo_timing = find_section(dev_priv, bdb, BDB_SDVO_PANEL_DTDS);
> if (!dvo_timing)
> return;
>
> @@ -349,7 +353,7 @@ parse_general_features(struct drm_i915_private *dev_priv,
> struct drm_device *dev = dev_priv->dev;
> const struct bdb_general_features *general;
>
> - general = find_section(bdb, BDB_GENERAL_FEATURES);
> + general = find_section(dev_priv, bdb, BDB_GENERAL_FEATURES);
> if (general) {
> dev_priv->vbt.int_tv_support = general->int_tv_support;
> dev_priv->vbt.int_crt_support = general->int_crt_support;
> @@ -374,7 +378,7 @@ parse_general_definitions(struct drm_i915_private *dev_priv,
> {
> const struct bdb_general_definitions *general;
>
> - general = find_section(bdb, BDB_GENERAL_DEFINITIONS);
> + general = find_section(dev_priv, bdb, BDB_GENERAL_DEFINITIONS);
> if (general) {
> u16 block_size = get_blocksize(general);
> if (block_size >= sizeof(*general)) {
> @@ -405,7 +409,7 @@ parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
> int i, child_device_num, count;
> u16 block_size;
>
> - p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
> + p_defs = find_section(dev_priv, bdb, BDB_GENERAL_DEFINITIONS);
> if (!p_defs) {
> DRM_DEBUG_KMS("No general definition block is found, unable to construct sdvo mapping.\n");
> return;
> @@ -491,7 +495,7 @@ parse_driver_features(struct drm_i915_private *dev_priv,
> {
> const struct bdb_driver_features *driver;
>
> - driver = find_section(bdb, BDB_DRIVER_FEATURES);
> + driver = find_section(dev_priv, bdb, BDB_DRIVER_FEATURES);
> if (!driver)
> return;
>
> @@ -519,7 +523,7 @@ parse_edp(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
> const struct edp_power_seq *edp_pps;
> const struct edp_link_params *edp_link_params;
>
> - edp = find_section(bdb, BDB_EDP);
> + edp = find_section(dev_priv, bdb, BDB_EDP);
> if (!edp) {
> if (dev_priv->vbt.edp_support)
> DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported.\n");
> @@ -630,7 +634,7 @@ parse_psr(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
> const struct bdb_psr *psr;
> const struct psr_table *psr_table;
>
> - psr = find_section(bdb, BDB_PSR);
> + psr = find_section(dev_priv, bdb, BDB_PSR);
> if (!psr) {
> DRM_DEBUG_KMS("No PSR BDB found.\n");
> return;
> @@ -768,7 +772,7 @@ parse_mipi(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
> /* Parse #52 for panel index used from panel_type already
> * parsed
> */
> - start = find_section(bdb, BDB_MIPI_CONFIG);
> + start = find_section(dev_priv, bdb, BDB_MIPI_CONFIG);
> if (!start) {
> DRM_DEBUG_KMS("No MIPI config BDB found");
> return;
> @@ -799,7 +803,7 @@ parse_mipi(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
> dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
>
> /* Check if we have sequence block as well */
> - sequence = find_section(bdb, BDB_MIPI_SEQUENCE);
> + sequence = find_section(dev_priv, bdb, BDB_MIPI_SEQUENCE);
> if (!sequence) {
> DRM_DEBUG_KMS("No MIPI Sequence found, parsing complete\n");
> return;
> @@ -1077,7 +1081,7 @@ parse_device_mapping(struct drm_i915_private *dev_priv,
> u8 expected_size;
> u16 block_size;
>
> - p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
> + p_defs = find_section(dev_priv, bdb, BDB_GENERAL_DEFINITIONS);
> if (!p_defs) {
> DRM_DEBUG_KMS("No general definition block is found, no devices defined.\n");
> return;
> @@ -1280,6 +1284,8 @@ intel_parse_bios(struct drm_device *dev)
> pci_unmap_rom(pdev, bios);
> return -1;
> }
> +
> + dev_priv->vbt_size = bdb->bdb_size;
> }
>
> /* Grab useful general definitions */
> diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
> index 3a43db9..c2f1a4a 100644
> --- a/drivers/gpu/drm/i915/intel_opregion.c
> +++ b/drivers/gpu/drm/i915/intel_opregion.c
> @@ -793,6 +793,12 @@ int intel_opregion_setup(struct drm_device *dev)
> goto err_vbt;
> }
>
> + /* Assigning the vbt_size based on the VBT location */
> + if (opregion->header->opregion_ver >= 2 && opregion->asle->rvda)
> + dev_priv->vbt_size = opregion->asle->rvds;
IIUC this one includes VBT Header...
> + else
> + dev_priv->vbt_size = bdb->bdb_size;
...and this one doesn't, so one of them will be wrong in the size checks
in find_section.
If you have a variable called "vbt_size" it better include all of VBT,
and not just part of it.
BR,
Jani.
> +
> dev_priv->bdb_start = bdb;
> opregion->vbt = vbt_base;
>
> --
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list