[Intel-gfx] [BXT MIPI PATCH v3 02/14] drm/i915/bxt: Enable BXT DSI PLL
Jani Nikula
jani.nikula at intel.com
Fri Sep 18 05:32:27 PDT 2015
On Tue, 01 Sep 2015, Uma Shankar <uma.shankar at intel.com> wrote:
> From: Shashank Sharma <shashank.sharma at intel.com>
>
> This patch adds new functions for BXT clock and PLL programming.
> They are:
> 1. configure_dsi_pll for BXT.
> This function does the basic math and generates the divider ratio
> based on requested pixclock, and program clock registers.
> 2. enable_dsi_pll function.
> This function programs the calculated clock values on the PLL.
> 3. intel_enable_dsi_pll
> Wrapper function to use same code for multiple platforms. It checks the
> platform and calls appropriate core pll enable function.
>
> v2: Fixed Jani's review comments. Macros are adjusted as per convention.
>
> v3: Removed a redundant change wrt code comment.
>
> Signed-off-by: Shashank Sharma <shashank.sharma at intel.com>
> Signed-off-by: Uma Shankar <uma.shankar at intel.com>
Reviewed-by: Jani Nikula <jani.nikula at intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 22 ++++++++
> drivers/gpu/drm/i915/intel_dsi.c | 2 +-
> drivers/gpu/drm/i915/intel_dsi.h | 2 +-
> drivers/gpu/drm/i915/intel_dsi_pll.c | 95 +++++++++++++++++++++++++++++++++-
> 4 files changed, 118 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 621151b..06bb2e1 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -7362,6 +7362,28 @@ enum skl_disp_power_wells {
>
> #define _MIPI_PORT(port, a, c) _PORT3(port, a, 0, c) /* ports A and C only */
>
> +#define BXT_DSI_PLL_CTL 0x161000
> +#define BXT_DSI_PLL_PVD_RATIO_SHIFT 16
> +#define BXT_DSI_PLL_PVD_RATIO_MASK (3 << BXT_DSI_PLL_PVD_RATIO_SHIFT)
> +#define BXT_DSI_PLL_PVD_RATIO_1 (1 << BXT_DSI_PLL_PVD_RATIO_SHIFT)
> +#define BXT_DSIC_16X_BY2 (1 << 10)
> +#define BXT_DSIC_16X_BY3 (2 << 10)
> +#define BXT_DSIC_16X_BY4 (3 << 10)
> +#define BXT_DSIA_16X_BY2 (1 << 8)
> +#define BXT_DSIA_16X_BY3 (2 << 8)
> +#define BXT_DSIA_16X_BY4 (3 << 8)
> +#define BXT_DSI_FREQ_SEL_SHIFT 8
> +#define BXT_DSI_FREQ_SEL_MASK (0xF << BXT_DSI_FREQ_SEL_SHIFT)
> +
> +#define BXT_DSI_PLL_RATIO_MAX 0x7D
> +#define BXT_DSI_PLL_RATIO_MIN 0x22
> +#define BXT_DSI_PLL_RATIO_MASK 0xFF
> +#define BXT_REF_CLOCK_KHZ 19500
> +
> +#define BXT_DSI_PLL_ENABLE 0x46080
> +#define BXT_DSI_PLL_DO_ENABLE (1 << 31)
> +#define BXT_DSI_PLL_LOCKED (1 << 30)
> +
> #define _MIPIA_PORT_CTRL (VLV_DISPLAY_BASE + 0x61190)
> #define _MIPIC_PORT_CTRL (VLV_DISPLAY_BASE + 0x61700)
> #define MIPI_PORT_CTRL(port) _MIPI_PORT(port, _MIPIA_PORT_CTRL, _MIPIC_PORT_CTRL)
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index b59b828..fb259fb 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -903,8 +903,8 @@ static void intel_dsi_pre_pll_enable(struct intel_encoder *encoder)
> DRM_DEBUG_KMS("\n");
>
> intel_dsi_prepare(encoder);
> + intel_enable_dsi_pll(encoder);
>
> - vlv_enable_dsi_pll(encoder);
> }
>
> static enum drm_connector_status
> diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
> index 2784ac4..20cfcf07 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.h
> +++ b/drivers/gpu/drm/i915/intel_dsi.h
> @@ -121,7 +121,7 @@ static inline struct intel_dsi *enc_to_intel_dsi(struct drm_encoder *encoder)
> return container_of(encoder, struct intel_dsi, base.base);
> }
>
> -extern void vlv_enable_dsi_pll(struct intel_encoder *encoder);
> +extern void intel_enable_dsi_pll(struct intel_encoder *encoder);
> extern void vlv_disable_dsi_pll(struct intel_encoder *encoder);
> extern u32 vlv_get_dsi_pclk(struct intel_encoder *encoder, int pipe_bpp);
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c b/drivers/gpu/drm/i915/intel_dsi_pll.c
> index d20cf37..3830a4f 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_pll.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_pll.c
> @@ -237,7 +237,7 @@ static void vlv_configure_dsi_pll(struct intel_encoder *encoder)
> vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, dsi_mnp.dsi_pll_ctrl);
> }
>
> -void vlv_enable_dsi_pll(struct intel_encoder *encoder)
> +static void vlv_enable_dsi_pll(struct intel_encoder *encoder)
> {
> struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
> u32 tmp;
> @@ -368,3 +368,96 @@ u32 vlv_get_dsi_pclk(struct intel_encoder *encoder, int pipe_bpp)
>
> return pclk;
> }
> +
> +static bool bxt_configure_dsi_pll(struct intel_encoder *encoder)
> +{
> + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
> + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> + u8 dsi_ratio;
> + u32 dsi_clk;
> + u32 val;
> +
> + dsi_clk = dsi_clk_from_pclk(intel_dsi->pclk, intel_dsi->pixel_format,
> + intel_dsi->lane_count);
> +
> + /*
> + * From clock diagram, to get PLL ratio divider, divide double of DSI
> + * link rate (i.e., 2*8x=16x frequency value) by ref clock. Make sure to
> + * round 'up' the result
> + */
> + dsi_ratio = DIV_ROUND_UP(dsi_clk * 2, BXT_REF_CLOCK_KHZ);
> + if (dsi_ratio < BXT_DSI_PLL_RATIO_MIN ||
> + dsi_ratio > BXT_DSI_PLL_RATIO_MAX) {
> + DRM_ERROR("Cant get a suitable ratio from DSI PLL ratios\n");
> + return false;
> + }
> +
> + /*
> + * Program DSI ratio and Select MIPIC and MIPIA PLL output as 8x
> + * Spec says both have to be programmed, even if one is not getting
> + * used. Configure MIPI_CLOCK_CTL dividers in modeset
> + */
> + val = I915_READ(BXT_DSI_PLL_CTL);
> + val &= ~BXT_DSI_PLL_PVD_RATIO_MASK;
> + val &= ~BXT_DSI_FREQ_SEL_MASK;
> + val &= ~BXT_DSI_PLL_RATIO_MASK;
> + val |= (dsi_ratio | BXT_DSIA_16X_BY2 | BXT_DSIC_16X_BY2);
> +
> + /* As per recommendation from hardware team,
> + * Prog PVD ratio =1 if dsi ratio <= 50
> + */
> + if (dsi_ratio <= 50) {
> + val &= ~BXT_DSI_PLL_PVD_RATIO_MASK;
> + val |= BXT_DSI_PLL_PVD_RATIO_1;
> + }
> +
> + I915_WRITE(BXT_DSI_PLL_CTL, val);
> + POSTING_READ(BXT_DSI_PLL_CTL);
> +
> + return true;
> +}
> +
> +static void bxt_enable_dsi_pll(struct intel_encoder *encoder)
> +{
> + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
> + u32 val;
> +
> + DRM_DEBUG_KMS("\n");
> +
> + val = I915_READ(BXT_DSI_PLL_ENABLE);
> +
> + if (val & BXT_DSI_PLL_DO_ENABLE) {
> + WARN(1, "DSI PLL already enabled. Disabling it.\n");
> + val &= ~BXT_DSI_PLL_DO_ENABLE;
> + I915_WRITE(BXT_DSI_PLL_ENABLE, val);
> + }
> +
> + /* Configure PLL vales */
> + if (!bxt_configure_dsi_pll(encoder)) {
> + DRM_ERROR("Configure DSI PLL failed, abort PLL enable\n");
> + return;
> + }
> +
> + /* Enable DSI PLL */
> + val = I915_READ(BXT_DSI_PLL_ENABLE);
> + val |= BXT_DSI_PLL_DO_ENABLE;
> + I915_WRITE(BXT_DSI_PLL_ENABLE, val);
> +
> + /* Timeout and fail if PLL not locked */
> + if (wait_for(I915_READ(BXT_DSI_PLL_ENABLE) & BXT_DSI_PLL_LOCKED, 1)) {
> + DRM_ERROR("Timed out waiting for DSI PLL to lock\n");
> + return;
> + }
> +
> + DRM_DEBUG_KMS("DSI PLL locked\n");
> +}
> +
> +void intel_enable_dsi_pll(struct intel_encoder *encoder)
> +{
> + struct drm_device *dev = encoder->base.dev;
> +
> + if (IS_VALLEYVIEW(dev))
> + vlv_enable_dsi_pll(encoder);
> + else if (IS_BROXTON(dev))
> + bxt_enable_dsi_pll(encoder);
> +}
> --
> 1.7.9.5
>
--
Jani Nikula, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list