[Intel-gfx] [PATCH 36/43] drm/i915: Remove the magic AUX_CTL is at DP + foo tricks

ville.syrjala at linux.intel.com ville.syrjala at linux.intel.com
Fri Sep 18 10:03:49 PDT 2015


From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Currently we determine the location of the AUX registers in a confusing
way. First we assume the PCH registers are used always, but then we
override it for everything but HSW/BDW to use DP+0x10. Very confusing.

Let's just make it straightforward and simply add a few functions to
pick the right AUX_CTL based on the DP port.

To deal with VLV/CHV we'll include the display_mmio_offset into the
AUX register defines.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h |  54 ++++++++---------
 drivers/gpu/drm/i915/intel_dp.c | 124 ++++++++++++++++++++++++++++------------
 2 files changed, 113 insertions(+), 65 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 57b9469..4e97bf2 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4182,33 +4182,33 @@ enum skl_disp_power_wells {
  * is 20 bytes in each direction, hence the 5 fixed
  * data registers
  */
-#define DPA_AUX_CH_CTL			0x64010
-#define DPA_AUX_CH_DATA1		0x64014
-#define DPA_AUX_CH_DATA2		0x64018
-#define DPA_AUX_CH_DATA3		0x6401c
-#define DPA_AUX_CH_DATA4		0x64020
-#define DPA_AUX_CH_DATA5		0x64024
-
-#define DPB_AUX_CH_CTL			0x64110
-#define DPB_AUX_CH_DATA1		0x64114
-#define DPB_AUX_CH_DATA2		0x64118
-#define DPB_AUX_CH_DATA3		0x6411c
-#define DPB_AUX_CH_DATA4		0x64120
-#define DPB_AUX_CH_DATA5		0x64124
-
-#define DPC_AUX_CH_CTL			0x64210
-#define DPC_AUX_CH_DATA1		0x64214
-#define DPC_AUX_CH_DATA2		0x64218
-#define DPC_AUX_CH_DATA3		0x6421c
-#define DPC_AUX_CH_DATA4		0x64220
-#define DPC_AUX_CH_DATA5		0x64224
-
-#define DPD_AUX_CH_CTL			0x64310
-#define DPD_AUX_CH_DATA1		0x64314
-#define DPD_AUX_CH_DATA2		0x64318
-#define DPD_AUX_CH_DATA3		0x6431c
-#define DPD_AUX_CH_DATA4		0x64320
-#define DPD_AUX_CH_DATA5		0x64324
+#define DPA_AUX_CH_CTL		(dev_priv->info.display_mmio_offset + 0x64010)
+#define DPA_AUX_CH_DATA1	(dev_priv->info.display_mmio_offset + 0x64014)
+#define DPA_AUX_CH_DATA2	(dev_priv->info.display_mmio_offset + 0x64018)
+#define DPA_AUX_CH_DATA3	(dev_priv->info.display_mmio_offset + 0x6401c)
+#define DPA_AUX_CH_DATA4	(dev_priv->info.display_mmio_offset + 0x64020)
+#define DPA_AUX_CH_DATA5	(dev_priv->info.display_mmio_offset + 0x64024)
+
+#define DPB_AUX_CH_CTL		(dev_priv->info.display_mmio_offset + 0x64110)
+#define DPB_AUX_CH_DATA1	(dev_priv->info.display_mmio_offset + 0x64114)
+#define DPB_AUX_CH_DATA2	(dev_priv->info.display_mmio_offset + 0x64118)
+#define DPB_AUX_CH_DATA3	(dev_priv->info.display_mmio_offset + 0x6411c)
+#define DPB_AUX_CH_DATA4	(dev_priv->info.display_mmio_offset + 0x64120)
+#define DPB_AUX_CH_DATA5	(dev_priv->info.display_mmio_offset + 0x64124)
+
+#define DPC_AUX_CH_CTL		(dev_priv->info.display_mmio_offset + 0x64210)
+#define DPC_AUX_CH_DATA1	(dev_priv->info.display_mmio_offset + 0x64214)
+#define DPC_AUX_CH_DATA2	(dev_priv->info.display_mmio_offset + 0x64218)
+#define DPC_AUX_CH_DATA3	(dev_priv->info.display_mmio_offset + 0x6421c)
+#define DPC_AUX_CH_DATA4	(dev_priv->info.display_mmio_offset + 0x64220)
+#define DPC_AUX_CH_DATA5	(dev_priv->info.display_mmio_offset + 0x64224)
+
+#define DPD_AUX_CH_CTL		(dev_priv->info.display_mmio_offset + 0x64310)
+#define DPD_AUX_CH_DATA1	(dev_priv->info.display_mmio_offset + 0x64314)
+#define DPD_AUX_CH_DATA2	(dev_priv->info.display_mmio_offset + 0x64318)
+#define DPD_AUX_CH_DATA3	(dev_priv->info.display_mmio_offset + 0x6431c)
+#define DPD_AUX_CH_DATA4	(dev_priv->info.display_mmio_offset + 0x64320)
+#define DPD_AUX_CH_DATA5	(dev_priv->info.display_mmio_offset + 0x64324)
 
 #define   DP_AUX_CH_CTL_SEND_BUSY	    (1 << 31)
 #define   DP_AUX_CH_CTL_DONE		    (1 << 30)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 7e64555..bd8353f 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -743,6 +743,7 @@ static uint32_t i9xx_get_aux_send_ctl(struct intel_dp *intel_dp,
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	struct drm_device *dev = intel_dig_port->base.base.dev;
+	struct drm_i915_private *dev_priv = to_i915(dev);
 	uint32_t precharge, timeout;
 
 	if (IS_GEN6(dev))
@@ -1008,6 +1009,85 @@ intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
 	return ret;
 }
 
+static uint32_t g4x_aux_ctl_reg(struct drm_i915_private *dev_priv,
+				enum port port)
+{
+	switch (port) {
+	case PORT_B:
+		return DPB_AUX_CH_CTL;
+	case PORT_C:
+		return DPC_AUX_CH_CTL;
+	case PORT_D:
+		return DPD_AUX_CH_CTL;
+	default:
+		MISSING_CASE(port);
+		return DPB_AUX_CH_CTL;
+	}
+}
+
+static uint32_t ilk_aux_ctl_reg(struct drm_i915_private *dev_priv,
+				enum port port)
+{
+	switch (port) {
+	case PORT_A:
+		return DPA_AUX_CH_CTL;
+	case PORT_B:
+		return PCH_DPB_AUX_CH_CTL;
+	case PORT_C:
+		return PCH_DPC_AUX_CH_CTL;
+	case PORT_D:
+		return PCH_DPD_AUX_CH_CTL;
+	default:
+		MISSING_CASE(port);
+		return DPA_AUX_CH_CTL;
+	}
+}
+
+/*
+ * On SKL we don't have Aux for port E so we rely
+ * on VBT to set a proper alternate aux channel.
+ */
+static enum port skl_porte_aux_port(struct drm_i915_private *dev_priv)
+{
+	const struct ddi_vbt_port_info *info =
+		&dev_priv->vbt.ddi_port_info[PORT_E];
+
+	switch (info->alternate_aux_channel) {
+	case DP_AUX_A:
+		return PORT_A;
+	case DP_AUX_B:
+		return PORT_B;
+	case DP_AUX_C:
+		return PORT_C;
+	case DP_AUX_D:
+		return PORT_D;
+	default:
+		MISSING_CASE(info->alternate_aux_channel);
+		return PORT_A;
+	}
+}
+
+static uint32_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv,
+				enum port port)
+{
+	if (port == PORT_E)
+		port = skl_porte_aux_port(dev_priv);
+
+	switch (port) {
+	case PORT_A:
+		return DPA_AUX_CH_CTL;
+	case PORT_B:
+		return DPB_AUX_CH_CTL;
+	case PORT_C:
+		return DPC_AUX_CH_CTL;
+	case PORT_D:
+		return DPD_AUX_CH_CTL;
+	default:
+		MISSING_CASE(port);
+		return DPA_AUX_CH_CTL;
+	}
+}
+
 static void
 intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
 {
@@ -1015,67 +1095,35 @@ intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	enum port port = intel_dig_port->port;
-	struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port];
 	const char *name = NULL;
-	uint32_t porte_aux_ctl_reg = DPA_AUX_CH_CTL;
 	int ret;
 
-	/* On SKL we don't have Aux for port E so we rely on VBT to set
-	 * a proper alternate aux channel.
-	 */
-	if (IS_SKYLAKE(dev) && port == PORT_E) {
-		switch (info->alternate_aux_channel) {
-		case DP_AUX_B:
-			porte_aux_ctl_reg = DPB_AUX_CH_CTL;
-			break;
-		case DP_AUX_C:
-			porte_aux_ctl_reg = DPC_AUX_CH_CTL;
-			break;
-		case DP_AUX_D:
-			porte_aux_ctl_reg = DPD_AUX_CH_CTL;
-			break;
-		case DP_AUX_A:
-		default:
-			porte_aux_ctl_reg = DPA_AUX_CH_CTL;
-		}
-	}
-
 	switch (port) {
 	case PORT_A:
-		intel_dp->aux_ch_ctl_reg = DPA_AUX_CH_CTL;
 		name = "DPDDC-A";
 		break;
 	case PORT_B:
-		intel_dp->aux_ch_ctl_reg = PCH_DPB_AUX_CH_CTL;
 		name = "DPDDC-B";
 		break;
 	case PORT_C:
-		intel_dp->aux_ch_ctl_reg = PCH_DPC_AUX_CH_CTL;
 		name = "DPDDC-C";
 		break;
 	case PORT_D:
-		intel_dp->aux_ch_ctl_reg = PCH_DPD_AUX_CH_CTL;
 		name = "DPDDC-D";
 		break;
 	case PORT_E:
-		intel_dp->aux_ch_ctl_reg = porte_aux_ctl_reg;
 		name = "DPDDC-E";
 		break;
 	default:
 		BUG();
 	}
 
-	/*
-	 * The AUX_CTL register is usually DP_CTL + 0x10.
-	 *
-	 * On Haswell and Broadwell though:
-	 *   - Both port A DDI_BUF_CTL and DDI_AUX_CTL are on the CPU
-	 *   - Port B/C/D AUX channels are on the PCH, DDI_BUF_CTL on the CPU
-	 *
-	 * Skylake moves AUX_CTL back next to DDI_BUF_CTL, on the CPU.
-	 */
-	if (!IS_HASWELL(dev) && !IS_BROADWELL(dev) && port != PORT_E)
-		intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
+	if (INTEL_INFO(dev_priv)->gen >= 9)
+		intel_dp->aux_ch_ctl_reg = skl_aux_ctl_reg(dev_priv, port);
+	else if (HAS_PCH_SPLIT(dev_priv))
+		intel_dp->aux_ch_ctl_reg = ilk_aux_ctl_reg(dev_priv, port);
+	else
+		intel_dp->aux_ch_ctl_reg = g4x_aux_ctl_reg(dev_priv, port);
 
 	intel_dp->aux.name = name;
 	intel_dp->aux.dev = dev->dev;
-- 
2.4.6



More information about the Intel-gfx mailing list