[Intel-gfx] [MIPI SEQ PARSING v2 PATCH 04/11] drm/i915: Using the approprite vbt size if vbt is not in mailbox4 of opregion
Deepak, M
m.deepak at intel.com
Mon Sep 21 23:24:36 PDT 2015
>-----Original Message-----
>From: Jani Nikula [mailto:jani.nikula at linux.intel.com]
>Sent: Thursday, September 17, 2015 5:48 PM
>To: Deepak, M; intel-gfx at lists.freedesktop.org
>Cc: Deepak, M
>Subject: Re: [Intel-gfx] [MIPI SEQ PARSING v2 PATCH 04/11] drm/i915: Using
>the approprite vbt size if vbt is not in mailbox4 of opregion
>
>On Thu, 10 Sep 2015, Deepak M <m.deepak at intel.com> wrote:
>> Currently the field in bdb header which indicates the VBT size is of 2
>> bytes, but there are some cases where VBT size exceeds 64KB in which
>> case this field may not contain the correct VBT size.
>> So its better to get the VBT size from the mailbox3 if VBT is not
>> present in the mailbox4 of opregion.
>>
>> v2: - Use opregion filed from dev_priv struct instead of creating
>> a new field in dev_priv (Jani)
>> - Have vbt_size field vaild in all scenarios (Jani)
>> - rebase
>>
>> Signed-off-by: Deepak M <m.deepak at intel.com>
>> ---
>> drivers/gpu/drm/i915/i915_drv.h | 2 ++
>> drivers/gpu/drm/i915/intel_bios.c | 42 +++++++++++++++++++----------
>----
>> drivers/gpu/drm/i915/intel_opregion.c | 6 +++++
>> 3 files changed, 32 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_drv.h
>> b/drivers/gpu/drm/i915/i915_drv.h index 507d57a..91ccbc6 100644
>> --- a/drivers/gpu/drm/i915/i915_drv.h
>> +++ b/drivers/gpu/drm/i915/i915_drv.h
>> @@ -1777,6 +1777,8 @@ struct drm_i915_private {
>> u32 pm_rps_events;
>> u32 pipestat_irq_mask[I915_MAX_PIPES];
>>
>> + u32 vbt_size;
>
>No. dev_priv is not a random area to throw things into. The place you're
>looking for is dev_priv->opregion, i.e. struct intel_opregion.
>
>> +
>> struct i915_hotplug hotplug;
>> struct i915_fbc fbc;
>> struct i915_drrs drrs;
>> diff --git a/drivers/gpu/drm/i915/intel_bios.c
>> b/drivers/gpu/drm/i915/intel_bios.c
>> index 1932a86..34a1042 100644
>> --- a/drivers/gpu/drm/i915/intel_bios.c
>> +++ b/drivers/gpu/drm/i915/intel_bios.c
>> @@ -37,17 +37,19 @@
>> static int panel_type;
>>
>> static const void *
>> -find_section(const void *_bdb, int section_id)
>> +find_section(struct drm_i915_private *dev_priv,
>> + const void *_bdb, int section_id)
>> {
>> const struct bdb_header *bdb = _bdb;
>> const u8 *base = _bdb;
>> int index = 0;
>> - u16 total, current_size;
>> + u32 total, current_size;
>> u8 current_id;
>>
>> /* skip to first section */
>> index += bdb->header_size;
>> - total = bdb->bdb_size;
>> +
>> + total = dev_priv->vbt_size;
>
>vbt_size != bdb_size. See below.
>
>>
>> /* walk the sections looking for section_id */
>> while (index + 3 < total) {
>> @@ -179,7 +181,7 @@ parse_lfp_panel_data(struct drm_i915_private
>*dev_priv,
>> struct drm_display_mode *panel_fixed_mode;
>> int drrs_mode;
>>
>> - lvds_options = find_section(bdb, BDB_LVDS_OPTIONS);
>> + lvds_options = find_section(dev_priv, bdb, BDB_LVDS_OPTIONS);
>> if (!lvds_options)
>> return;
>>
>> @@ -211,11 +213,12 @@ parse_lfp_panel_data(struct drm_i915_private
>*dev_priv,
>> break;
>> }
>>
>> - lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
>> + lvds_lfp_data = find_section(dev_priv, bdb, BDB_LVDS_LFP_DATA);
>> if (!lvds_lfp_data)
>> return;
>>
>> - lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS);
>> + lvds_lfp_data_ptrs = find_section(dev_priv, bdb,
>> + BDB_LVDS_LFP_DATA_PTRS);
>> if (!lvds_lfp_data_ptrs)
>> return;
>>
>> @@ -257,7 +260,7 @@ parse_lfp_backlight(struct drm_i915_private
>*dev_priv,
>> const struct bdb_lfp_backlight_data *backlight_data;
>> const struct bdb_lfp_backlight_data_entry *entry;
>>
>> - backlight_data = find_section(bdb, BDB_LVDS_BACKLIGHT);
>> + backlight_data = find_section(dev_priv, bdb, BDB_LVDS_BACKLIGHT);
>> if (!backlight_data)
>> return;
>>
>> @@ -305,14 +308,15 @@ parse_sdvo_panel_data(struct drm_i915_private
>*dev_priv,
>> if (index == -1) {
>> const struct bdb_sdvo_lvds_options *sdvo_lvds_options;
>>
>> - sdvo_lvds_options = find_section(bdb,
>BDB_SDVO_LVDS_OPTIONS);
>> + sdvo_lvds_options = find_section(dev_priv, bdb,
>> + BDB_SDVO_LVDS_OPTIONS);
>> if (!sdvo_lvds_options)
>> return;
>>
>> index = sdvo_lvds_options->panel_type;
>> }
>>
>> - dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS);
>> + dvo_timing = find_section(dev_priv, bdb, BDB_SDVO_PANEL_DTDS);
>> if (!dvo_timing)
>> return;
>>
>> @@ -349,7 +353,7 @@ parse_general_features(struct drm_i915_private
>*dev_priv,
>> struct drm_device *dev = dev_priv->dev;
>> const struct bdb_general_features *general;
>>
>> - general = find_section(bdb, BDB_GENERAL_FEATURES);
>> + general = find_section(dev_priv, bdb, BDB_GENERAL_FEATURES);
>> if (general) {
>> dev_priv->vbt.int_tv_support = general->int_tv_support;
>> dev_priv->vbt.int_crt_support = general->int_crt_support;
>@@ -374,7
>> +378,7 @@ parse_general_definitions(struct drm_i915_private *dev_priv,
>> {
>> const struct bdb_general_definitions *general;
>>
>> - general = find_section(bdb, BDB_GENERAL_DEFINITIONS);
>> + general = find_section(dev_priv, bdb, BDB_GENERAL_DEFINITIONS);
>> if (general) {
>> u16 block_size = get_blocksize(general);
>> if (block_size >= sizeof(*general)) { @@ -405,7 +409,7 @@
>> parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
>> int i, child_device_num, count;
>> u16 block_size;
>>
>> - p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
>> + p_defs = find_section(dev_priv, bdb, BDB_GENERAL_DEFINITIONS);
>> if (!p_defs) {
>> DRM_DEBUG_KMS("No general definition block is found,
>unable to construct sdvo mapping.\n");
>> return;
>> @@ -491,7 +495,7 @@ parse_driver_features(struct drm_i915_private
>> *dev_priv, {
>> const struct bdb_driver_features *driver;
>>
>> - driver = find_section(bdb, BDB_DRIVER_FEATURES);
>> + driver = find_section(dev_priv, bdb, BDB_DRIVER_FEATURES);
>> if (!driver)
>> return;
>>
>> @@ -519,7 +523,7 @@ parse_edp(struct drm_i915_private *dev_priv, const
>struct bdb_header *bdb)
>> const struct edp_power_seq *edp_pps;
>> const struct edp_link_params *edp_link_params;
>>
>> - edp = find_section(bdb, BDB_EDP);
>> + edp = find_section(dev_priv, bdb, BDB_EDP);
>> if (!edp) {
>> if (dev_priv->vbt.edp_support)
>> DRM_DEBUG_KMS("No eDP BDB found but eDP panel
>supported.\n"); @@
>> -630,7 +634,7 @@ parse_psr(struct drm_i915_private *dev_priv, const
>struct bdb_header *bdb)
>> const struct bdb_psr *psr;
>> const struct psr_table *psr_table;
>>
>> - psr = find_section(bdb, BDB_PSR);
>> + psr = find_section(dev_priv, bdb, BDB_PSR);
>> if (!psr) {
>> DRM_DEBUG_KMS("No PSR BDB found.\n");
>> return;
>> @@ -768,7 +772,7 @@ parse_mipi(struct drm_i915_private *dev_priv, const
>struct bdb_header *bdb)
>> /* Parse #52 for panel index used from panel_type already
>> * parsed
>> */
>> - start = find_section(bdb, BDB_MIPI_CONFIG);
>> + start = find_section(dev_priv, bdb, BDB_MIPI_CONFIG);
>> if (!start) {
>> DRM_DEBUG_KMS("No MIPI config BDB found");
>> return;
>> @@ -799,7 +803,7 @@ parse_mipi(struct drm_i915_private *dev_priv, const
>struct bdb_header *bdb)
>> dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
>>
>> /* Check if we have sequence block as well */
>> - sequence = find_section(bdb, BDB_MIPI_SEQUENCE);
>> + sequence = find_section(dev_priv, bdb, BDB_MIPI_SEQUENCE);
>> if (!sequence) {
>> DRM_DEBUG_KMS("No MIPI Sequence found, parsing
>complete\n");
>> return;
>> @@ -1077,7 +1081,7 @@ parse_device_mapping(struct drm_i915_private
>*dev_priv,
>> u8 expected_size;
>> u16 block_size;
>>
>> - p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
>> + p_defs = find_section(dev_priv, bdb, BDB_GENERAL_DEFINITIONS);
>> if (!p_defs) {
>> DRM_DEBUG_KMS("No general definition block is found, no
>devices defined.\n");
>> return;
>> @@ -1280,6 +1284,8 @@ intel_parse_bios(struct drm_device *dev)
>> pci_unmap_rom(pdev, bios);
>> return -1;
>> }
>> +
>> + dev_priv->vbt_size = bdb->bdb_size;
>> }
>>
>> /* Grab useful general definitions */ diff --git
>> a/drivers/gpu/drm/i915/intel_opregion.c
>> b/drivers/gpu/drm/i915/intel_opregion.c
>> index 3a43db9..c2f1a4a 100644
>> --- a/drivers/gpu/drm/i915/intel_opregion.c
>> +++ b/drivers/gpu/drm/i915/intel_opregion.c
>> @@ -793,6 +793,12 @@ int intel_opregion_setup(struct drm_device *dev)
>> goto err_vbt;
>> }
>>
>> + /* Assigning the vbt_size based on the VBT location */
>> + if (opregion->header->opregion_ver >= 2 && opregion->asle->rvda)
>> + dev_priv->vbt_size = opregion->asle->rvds;
>
>IIUC this one includes VBT Header...
>
>> + else
>> + dev_priv->vbt_size = bdb->bdb_size;
>
>...and this one doesn't, so one of them will be wrong in the size checks in
>find_section.
>
>If you have a variable called "vbt_size" it better include all of VBT, and not just
>part of it.
[Deepak M] Agreed, will fix this.
>
>
>BR,
>Jani.
>
>
>> +
>> dev_priv->bdb_start = bdb;
>> opregion->vbt = vbt_base;
>>
>> --
>> 1.7.9.5
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>--
>Jani Nikula, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list