[Intel-gfx] [PATCH 3/5] drm/i915: Make wait_for_flips interruptible.
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Wed Sep 23 04:27:10 PDT 2015
Move it from intel_crtc_atomic_commit to prepare_plane_fb.
Waiting is done before committing, otherwise it's too late
to undo the changes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
drivers/gpu/drm/i915/intel_atomic.c | 2 -
drivers/gpu/drm/i915/intel_display.c | 107 ++++++++++++++++++++---------------
drivers/gpu/drm/i915/intel_drv.h | 2 -
3 files changed, 62 insertions(+), 49 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
index f1975f267710..25a891aa3824 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -205,8 +205,6 @@ int intel_atomic_setup_scalers(struct drm_device *dev,
* but since this plane is unchanged just do the
* minimum required validation.
*/
- if (plane->type == DRM_PLANE_TYPE_PRIMARY)
- intel_crtc->atomic.wait_for_flips = true;
crtc_state->base.planes_changed = true;
}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 25e1eac260fd..cd651ff6c15b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3221,32 +3221,6 @@ void intel_finish_reset(struct drm_device *dev)
drm_modeset_unlock_all(dev);
}
-static void
-intel_finish_fb(struct drm_framebuffer *old_fb)
-{
- struct drm_i915_gem_object *obj = intel_fb_obj(old_fb);
- struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
- bool was_interruptible = dev_priv->mm.interruptible;
- int ret;
-
- /* Big Hammer, we also need to ensure that any pending
- * MI_WAIT_FOR_EVENT inside a user batch buffer on the
- * current scanout is retired before unpinning the old
- * framebuffer. Note that we rely on userspace rendering
- * into the buffer attached to the pipe they are waiting
- * on. If not, userspace generates a GPU hang with IPEHR
- * point to the MI_WAIT_FOR_EVENT.
- *
- * This should only fail upon a hung GPU, in which case we
- * can safely continue.
- */
- dev_priv->mm.interruptible = false;
- ret = i915_gem_object_wait_rendering(obj, true);
- dev_priv->mm.interruptible = was_interruptible;
-
- WARN_ON(ret);
-}
-
static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
@@ -3867,15 +3841,23 @@ static void page_flip_completed(struct intel_crtc *intel_crtc)
work->pending_flip_obj);
}
-void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
+static int intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ long ret;
WARN_ON(waitqueue_active(&dev_priv->pending_flip_queue));
- if (WARN_ON(wait_event_timeout(dev_priv->pending_flip_queue,
- !intel_crtc_has_pending_flip(crtc),
- 60*HZ) == 0)) {
+
+ ret = wait_event_interruptible_timeout(
+ dev_priv->pending_flip_queue,
+ !intel_crtc_has_pending_flip(crtc),
+ 60*HZ);
+
+ if (ret < 0)
+ return ret;
+
+ if (ret == 0) {
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
spin_lock_irq(&dev->event_lock);
@@ -3886,11 +3868,7 @@ void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
spin_unlock_irq(&dev->event_lock);
}
- if (crtc->primary->fb) {
- mutex_lock(&dev->struct_mutex);
- intel_finish_fb(crtc->primary->fb);
- mutex_unlock(&dev->struct_mutex);
- }
+ return 0;
}
/* Program iCLKIP clock to the desired frequency */
@@ -4750,9 +4728,6 @@ static void intel_pre_plane_update(struct intel_crtc *crtc)
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc_atomic_commit *atomic = &crtc->atomic;
- if (atomic->wait_for_flips)
- intel_crtc_wait_for_pending_flips(&crtc->base);
-
if (atomic->disable_fbc)
intel_fbc_disable_crtc(crtc);
@@ -11596,7 +11571,6 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
switch (plane->type) {
case DRM_PLANE_TYPE_PRIMARY:
- intel_crtc->atomic.wait_for_flips = true;
intel_crtc->atomic.pre_disable_primary = turn_off;
intel_crtc->atomic.post_enable_primary = turn_on;
@@ -13015,6 +12989,30 @@ static int intel_atomic_check(struct drm_device *dev,
return drm_atomic_helper_check_planes(state->dev, state);
}
+static int intel_atomic_prepare_commit(struct drm_device *dev,
+ struct drm_atomic_state *state,
+ bool async)
+{
+ struct drm_crtc_state *crtc_state;
+ struct drm_crtc *crtc;
+ int i, ret;
+
+ if (async) {
+ DRM_DEBUG_KMS("i915 does not yet support async commit\n");
+ return -EINVAL;
+ }
+
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ ret = intel_crtc_wait_for_pending_flips(crtc);
+ if (ret)
+ return ret;
+ }
+
+ ret = drm_atomic_helper_prepare_planes(dev, state);
+
+ return ret;
+}
+
/**
* intel_atomic_commit - commit validated state object
* @dev: DRM device
@@ -13042,12 +13040,7 @@ static int intel_atomic_commit(struct drm_device *dev,
int i;
bool any_ms = false;
- if (async) {
- DRM_DEBUG_KMS("i915 does not yet support async commit\n");
- return -EINVAL;
- }
-
- ret = drm_atomic_helper_prepare_planes(dev, state);
+ ret = intel_atomic_prepare_commit(dev, state, async);
if (ret)
return ret;
@@ -13306,6 +13299,29 @@ intel_prepare_plane_fb(struct drm_plane *plane,
if (ret)
return ret;
+ if (old_obj) {
+ struct drm_crtc_state *crtc_state =
+ drm_atomic_get_existing_crtc_state(new_state->state, plane->state->crtc);
+
+ /* Big Hammer, we also need to ensure that any pending
+ * MI_WAIT_FOR_EVENT inside a user batch buffer on the
+ * current scanout is retired before unpinning the old
+ * framebuffer. Note that we rely on userspace rendering
+ * into the buffer attached to the pipe they are waiting
+ * on. If not, userspace generates a GPU hang with IPEHR
+ * point to the MI_WAIT_FOR_EVENT.
+ *
+ * This should only fail upon a hung GPU, in which case we
+ * can safely continue.
+ */
+ if (needs_modeset(crtc_state))
+ ret = i915_gem_object_wait_rendering(old_obj, true);
+
+ /* Swallow -EIO errors to allow updates during hw lockup. */
+ if (ret && ret != -EIO)
+ goto out;
+ }
+
if (!obj) {
ret = 0;
} else if (plane->type == DRM_PLANE_TYPE_CURSOR &&
@@ -13321,6 +13337,7 @@ intel_prepare_plane_fb(struct drm_plane *plane,
if (ret == 0)
i915_gem_track_fb(old_obj, obj, intel_plane->frontbuffer_bit);
+out:
mutex_unlock(&dev->struct_mutex);
return ret;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index a2f0b981e26c..cfdb0f2714cd 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -499,7 +499,6 @@ struct skl_pipe_wm {
*/
struct intel_crtc_atomic_commit {
/* Sleepable operations to perform before commit */
- bool wait_for_flips;
bool disable_fbc;
bool disable_ips;
bool disable_cxsr;
@@ -1158,7 +1157,6 @@ enum intel_display_power_domain
intel_display_port_power_domain(struct intel_encoder *intel_encoder);
void intel_mode_from_pipe_config(struct drm_display_mode *mode,
struct intel_crtc_state *pipe_config);
-void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc);
void intel_modeset_preclose(struct drm_device *dev, struct drm_file *file);
int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
--
2.1.0
More information about the Intel-gfx
mailing list