[Intel-gfx] [PATCH] drm/i915/bxt: Set oscaledcompmethod to enable scale value

Daniel Vetter daniel at ffwll.ch
Mon Sep 28 01:27:26 PDT 2015


On Thu, Sep 24, 2015 at 02:12:02PM +0300, Imre Deak wrote:
> On to, 2015-09-24 at 10:22 +0530, Sonika Jindal wrote:
> > Bspec update tells that we have to enable oscaledcompmethod instead of
> > ouniqetrangenmethod for enabling scale value during swing programming.
> > 
> > v2: Adding back 'don't care' values to bxt_ddi_translations_dp and add
> > error message if ouniquetrangemethod was set (Imre)
> > 
> > Signed-off-by: Sonika Jindal <sonika.jindal at intel.com>
> > Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani at intel.com>(v1)
> 
> Reviewed-by: Imre Deak <imre.deak at intel.com>

Queued for -next, thanks for the patch.
-Daniel

> 
> > ---
> >  drivers/gpu/drm/i915/i915_reg.h  |    3 ++-
> >  drivers/gpu/drm/i915/intel_ddi.c |    8 ++++++--
> >  2 files changed, 8 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 812b7b2..3f2135d 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -1395,7 +1395,8 @@ enum skl_disp_power_wells {
> >  #define BXT_PORT_TX_DW3_LN0(port)	_PORT3(port, _PORT_TX_DW3_LN0_A,  \
> >  						     _PORT_TX_DW3_LN0_B,  \
> >  						     _PORT_TX_DW3_LN0_C)
> > -#define   UNIQE_TRANGE_EN_METHOD	(1 << 27)
> > +#define   SCALE_DCOMP_METHOD		(1 << 26)
> > +#define   UNIQUE_TRANGE_EN_METHOD	(1 << 27)
> >  
> >  #define _PORT_TX_DW4_LN0_A		0x162510
> >  #define _PORT_TX_DW4_LN0_B		0x6C510
> > diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> > index fec51df..7705bc9 100644
> > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > @@ -2151,9 +2151,13 @@ static void bxt_ddi_vswing_sequence(struct drm_device *dev, u32 level,
> >  	I915_WRITE(BXT_PORT_TX_DW2_GRP(port), val);
> >  
> >  	val = I915_READ(BXT_PORT_TX_DW3_LN0(port));
> > -	val &= ~UNIQE_TRANGE_EN_METHOD;
> > +	val &= ~SCALE_DCOMP_METHOD;
> >  	if (ddi_translations[level].enable)
> > -		val |= UNIQE_TRANGE_EN_METHOD;
> > +		val |= SCALE_DCOMP_METHOD;
> > +
> > +	if ((val & UNIQUE_TRANGE_EN_METHOD) && !(val & SCALE_DCOMP_METHOD))
> > +		DRM_ERROR("Disabled scaling while ouniqetrangenmethod was set");
> > +
> >  	I915_WRITE(BXT_PORT_TX_DW3_GRP(port), val);
> >  
> >  	val = I915_READ(BXT_PORT_TX_DW4_LN0(port));
> 
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch


More information about the Intel-gfx mailing list