[Intel-gfx] [PATCH 2/6] drm/i915: Unduplicate CHV signal level code

Ander Conselvan de Oliveira ander.conselvan.de.oliveira at intel.com
Fri Apr 8 15:31:42 UTC 2016


The code for programming voltage swing and emphasis was duplicated
between DP and HDMI code. Move that to a new file, intel_dpio_phy.c.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
---
 drivers/gpu/drm/i915/Makefile         |   1 +
 drivers/gpu/drm/i915/i915_drv.h       |   5 ++
 drivers/gpu/drm/i915/intel_dp.c       | 103 ++--------------------------
 drivers/gpu/drm/i915/intel_dpio_phy.c | 122 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_hdmi.c     |  72 +-------------------
 5 files changed, 136 insertions(+), 167 deletions(-)
 create mode 100644 drivers/gpu/drm/i915/intel_dpio_phy.c

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 7ffb51b..eb45e28 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -57,6 +57,7 @@ i915-y += intel_audio.o \
 	  intel_bios.o \
 	  intel_color.o \
 	  intel_display.o \
+	  intel_dpio_phy.o \
 	  intel_dpll_mgr.o \
 	  intel_fbc.o \
 	  intel_fifo_underrun.o \
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 4ebd3ff..3c393e3 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3504,6 +3504,11 @@ void intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
 u32 vlv_flisdsi_read(struct drm_i915_private *dev_priv, u32 reg);
 void vlv_flisdsi_write(struct drm_i915_private *dev_priv, u32 reg, u32 val);
 
+/* intel_dpio_phy.c */
+void chv_set_phy_signal_level(struct intel_encoder *encoder,
+			      u32 deemph_reg_value, u32 margin_reg_value,
+			      bool uniq_trans_scale);
+
 int intel_gpu_freq(struct drm_i915_private *dev_priv, int val);
 int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
 
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index da0c3d2..5ba72b0 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3339,23 +3339,12 @@ static uint32_t vlv_signal_levels(struct intel_dp *intel_dp)
 	return 0;
 }
 
-static bool chv_need_uniq_trans_scale(uint8_t train_set)
-{
-	return (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) == DP_TRAIN_PRE_EMPH_LEVEL_0 &&
-		(train_set & DP_TRAIN_VOLTAGE_SWING_MASK) == DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
-}
-
 static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
 {
-	struct drm_device *dev = intel_dp_to_dev(intel_dp);
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
-	struct intel_crtc *intel_crtc = to_intel_crtc(dport->base.base.crtc);
-	u32 deemph_reg_value, margin_reg_value, val;
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+	u32 deemph_reg_value, margin_reg_value;
+	bool uniq_trans_scale = false;
 	uint8_t train_set = intel_dp->train_set[0];
-	enum dpio_channel ch = vlv_dport_to_channel(dport);
-	enum pipe pipe = intel_crtc->pipe;
-	int i;
 
 	switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
 	case DP_TRAIN_PRE_EMPH_LEVEL_0:
@@ -3375,7 +3364,7 @@ static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
 		case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
 			deemph_reg_value = 128;
 			margin_reg_value = 154;
-			/* FIXME extra to set for 1200 */
+			uniq_trans_scale = true;
 			break;
 		default:
 			return 0;
@@ -3427,88 +3416,8 @@ static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
 		return 0;
 	}
 
-	mutex_lock(&dev_priv->sb_lock);
-
-	/* Clear calc init */
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
-	val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
-	val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
-	val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
-
-	if (intel_crtc->config->lane_count > 2) {
-		val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
-		val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
-		val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
-		val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
-		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
-	}
-
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
-	val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
-	val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
-
-	if (intel_crtc->config->lane_count > 2) {
-		val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
-		val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
-		val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
-		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
-	}
-
-	/* Program swing deemph */
-	for (i = 0; i < intel_crtc->config->lane_count; i++) {
-		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
-		val &= ~DPIO_SWING_DEEMPH9P5_MASK;
-		val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT;
-		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val);
-	}
-
-	/* Program swing margin */
-	for (i = 0; i < intel_crtc->config->lane_count; i++) {
-		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
-
-		val &= ~DPIO_SWING_MARGIN000_MASK;
-		val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT;
-
-		/*
-		 * Supposedly this value shouldn't matter when unique transition
-		 * scale is disabled, but in fact it does matter. Let's just
-		 * always program the same value and hope it's OK.
-		 */
-		val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
-		val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT;
-
-		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
-	}
-
-	/*
-	 * The document said it needs to set bit 27 for ch0 and bit 26
-	 * for ch1. Might be a typo in the doc.
-	 * For now, for this unique transition scale selection, set bit
-	 * 27 for ch0 and ch1.
-	 */
-	for (i = 0; i < intel_crtc->config->lane_count; i++) {
-		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
-		if (chv_need_uniq_trans_scale(train_set))
-			val |= DPIO_TX_UNIQ_TRANS_SCALE_EN;
-		else
-			val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
-		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
-	}
-
-	/* Start swing calculation */
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
-	val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
-
-	if (intel_crtc->config->lane_count > 2) {
-		val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
-		val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
-		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
-	}
-
-	mutex_unlock(&dev_priv->sb_lock);
+	chv_set_phy_signal_level(encoder, deemph_reg_value,
+				 margin_reg_value, uniq_trans_scale);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c b/drivers/gpu/drm/i915/intel_dpio_phy.c
new file mode 100644
index 0000000..cbe1703d
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dpio_phy.c
@@ -0,0 +1,122 @@
+/*
+ * Copyright © 2014-2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include "intel_drv.h"
+
+void chv_set_phy_signal_level(struct intel_encoder *encoder,
+			      u32 deemph_reg_value, u32 margin_reg_value,
+			      bool uniq_trans_scale)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+	struct intel_crtc *intel_crtc = to_intel_crtc(dport->base.base.crtc);
+	enum dpio_channel ch = vlv_dport_to_channel(dport);
+	enum pipe pipe = intel_crtc->pipe;
+	u32 val;
+	int i;
+
+	mutex_lock(&dev_priv->sb_lock);
+
+	/* Clear calc init */
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
+	val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
+	val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
+	val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
+
+	if (intel_crtc->config->lane_count > 2) {
+		val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
+		val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
+		val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
+		val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
+		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
+	}
+
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
+	val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
+	val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
+
+	if (intel_crtc->config->lane_count > 2) {
+		val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
+		val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
+		val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
+		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
+	}
+
+	/* Program swing deemph */
+	for (i = 0; i < intel_crtc->config->lane_count; i++) {
+		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
+		val &= ~DPIO_SWING_DEEMPH9P5_MASK;
+		val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT;
+		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val);
+	}
+
+	/* Program swing margin */
+	for (i = 0; i < intel_crtc->config->lane_count; i++) {
+		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
+
+		val &= ~DPIO_SWING_MARGIN000_MASK;
+		val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT;
+
+		/*
+		 * Supposedly this value shouldn't matter when unique transition
+		 * scale is disabled, but in fact it does matter. Let's just
+		 * always program the same value and hope it's OK.
+		 */
+		val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
+		val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT;
+
+		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
+	}
+
+	/*
+	 * The document said it needs to set bit 27 for ch0 and bit 26
+	 * for ch1. Might be a typo in the doc.
+	 * For now, for this unique transition scale selection, set bit
+	 * 27 for ch0 and ch1.
+	 */
+	for (i = 0; i < intel_crtc->config->lane_count; i++) {
+		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
+		if (uniq_trans_scale)
+			val |= DPIO_TX_UNIQ_TRANS_SCALE_EN;
+		else
+			val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
+		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
+	}
+
+	/* Start swing calculation */
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
+	val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
+
+	if (intel_crtc->config->lane_count > 2) {
+		val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
+		val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
+		vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
+	}
+
+	mutex_unlock(&dev_priv->sb_lock);
+
+}
+
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 2dc6e00..107a80a 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1911,78 +1911,10 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
 	/* Deassert data lane reset */
 	chv_data_lane_soft_reset(encoder, false);
 
-	/* Clear calc init */
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
-	val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
-	val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
-	val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
-
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
-	val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
-	val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
-	val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
-
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
-	val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
-	val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
-
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
-	val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
-	val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
-
-	/* FIXME: Program the support xxx V-dB */
-	/* Use 800mV-0dB */
-	for (i = 0; i < 4; i++) {
-		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
-		val &= ~DPIO_SWING_DEEMPH9P5_MASK;
-		val |= 128 << DPIO_SWING_DEEMPH9P5_SHIFT;
-		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val);
-	}
-
-	for (i = 0; i < 4; i++) {
-		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
-
-		val &= ~DPIO_SWING_MARGIN000_MASK;
-		val |= 102 << DPIO_SWING_MARGIN000_SHIFT;
-
-		/*
-		 * Supposedly this value shouldn't matter when unique transition
-		 * scale is disabled, but in fact it does matter. Let's just
-		 * always program the same value and hope it's OK.
-		 */
-		val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
-		val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT;
-
-		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
-	}
-
-	/*
-	 * The document said it needs to set bit 27 for ch0 and bit 26
-	 * for ch1. Might be a typo in the doc.
-	 * For now, for this unique transition scale selection, set bit
-	 * 27 for ch0 and ch1.
-	 */
-	for (i = 0; i < 4; i++) {
-		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
-		val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
-		vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
-	}
-
-	/* Start swing calculation */
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
-	val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
-
-	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
-	val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
-	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
-
 	mutex_unlock(&dev_priv->sb_lock);
 
+	chv_set_phy_signal_level(encoder, 128, 102, false);
+
 	intel_hdmi->set_infoframes(&encoder->base,
 				   intel_crtc->config->has_hdmi_sink,
 				   adjusted_mode);
-- 
2.4.11



More information about the Intel-gfx mailing list