[Intel-gfx] [PATCH 11/16] drm/i915/bxt: Don't toggle power well 1 on-demand
Ville Syrjälä
ville.syrjala at linux.intel.com
Fri Apr 8 18:10:21 UTC 2016
On Fri, Apr 01, 2016 at 04:02:42PM +0300, Imre Deak wrote:
> Power well 1 is managed by the DMC firmware so don't toggle it on-demand
> from the driver. This means we need to follow the BSpec display
> initialization sequence during driver loading and resuming (both system
> and runtime) and enable power well 1 only once there. Afterwards DMC
> will toggle power well 1 whenever entering/exiting DC5.
>
> For this to work we also need to do away getting the PLL power domain,
> since that just kept runtime PM disabled for good.
>
> Signed-off-by: Imre Deak <imre.deak at intel.com>
Make it more like SKL (which also needs more work in this area,
but that's another matter).
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.c | 15 +------
> drivers/gpu/drm/i915/intel_display.c | 17 --------
> drivers/gpu/drm/i915/intel_dpll_mgr.c | 5 +--
> drivers/gpu/drm/i915/intel_drv.h | 2 +
> drivers/gpu/drm/i915/intel_runtime_pm.c | 75 +++++++++++++++++++++++++++------
> 5 files changed, 66 insertions(+), 48 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> index 3998f6a..3f56ddf 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -1070,10 +1070,7 @@ static int hsw_suspend_complete(struct drm_i915_private *dev_priv)
>
> static int bxt_suspend_complete(struct drm_i915_private *dev_priv)
> {
> - /* TODO: when DC5 support is added disable DC5 here. */
> -
> - broxton_ddi_phy_uninit(dev_priv);
> - broxton_uninit_cdclk(dev_priv);
> + bxt_display_core_uninit(dev_priv);
> bxt_enable_dc9(dev_priv);
>
> return 0;
> @@ -1081,16 +1078,8 @@ static int bxt_suspend_complete(struct drm_i915_private *dev_priv)
>
> static int bxt_resume_prepare(struct drm_i915_private *dev_priv)
> {
> - /* TODO: when CSR FW support is added make sure the FW is loaded */
> -
> bxt_disable_dc9(dev_priv);
> -
> - /*
> - * TODO: when DC5 support is added enable DC5 here if the CSR FW
> - * is available.
> - */
> - broxton_init_cdclk(dev_priv);
> - broxton_ddi_phy_init(dev_priv);
> + bxt_display_core_init(dev_priv, true);
>
> return 0;
> }
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index d9da89d..1fbe619 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -5442,21 +5442,6 @@ static void broxton_set_cdclk(struct drm_i915_private *dev_priv, int frequency)
>
> void broxton_init_cdclk(struct drm_i915_private *dev_priv)
> {
> - uint32_t val;
> -
> - /*
> - * NDE_RSTWRN_OPT RST PCH Handshake En must always be 0b on BXT
> - * or else the reset will hang because there is no PCH to respond.
> - * Move the handshake programming to initialization sequence.
> - * Previously was left up to BIOS.
> - */
> - val = I915_READ(HSW_NDE_RSTWRN_OPT);
> - val &= ~RESET_PCH_HANDSHAKE_ENABLE;
> - I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> -
> - /* Enable PG1 for cdclk */
> - intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
> -
> /* check if cd clock is enabled */
> if (I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_PLL_ENABLE) {
> DRM_DEBUG_KMS("Display already initialized\n");
> @@ -5493,8 +5478,6 @@ void broxton_uninit_cdclk(struct drm_i915_private *dev_priv)
>
> /* Set minimum (bypass) frequency, in effect turning off the DE PLL */
> broxton_set_cdclk(dev_priv, 19200);
> -
> - intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
> }
>
> static const struct skl_cdclk_entry {
> diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> index fbe88b8..a060b67 100644
> --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> @@ -1644,10 +1644,7 @@ static void intel_ddi_pll_init(struct drm_device *dev)
> DRM_DEBUG_KMS("Sanitized cdclk programmed by pre-os\n");
> if (!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE))
> DRM_ERROR("LCPLL1 is disabled\n");
> - } else if (IS_BROXTON(dev)) {
> - broxton_init_cdclk(dev_priv);
> - broxton_ddi_phy_init(dev_priv);
> - } else {
> + } else if (!IS_BROXTON(dev_priv)) {
> /*
> * The LCPLL register should be turned on by the BIOS. For now
> * let's just check its state and print errors in case
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index e8843a7..4c2083d 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1460,6 +1460,8 @@ int intel_power_domains_init(struct drm_i915_private *);
> void intel_power_domains_fini(struct drm_i915_private *);
> void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume);
> void intel_power_domains_suspend(struct drm_i915_private *dev_priv);
> +void bxt_display_core_init(struct drm_i915_private *dev_priv, bool resume);
> +void bxt_display_core_uninit(struct drm_i915_private *dev_priv);
> void intel_runtime_pm_enable(struct drm_i915_private *dev_priv);
> const char *
> intel_display_power_domain_str(enum intel_display_power_domain domain);
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index 58ed8bc..0c30635 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -419,25 +419,13 @@ static void hsw_set_power_well(struct drm_i915_private *dev_priv,
> BIT(POWER_DOMAIN_VGA) | \
> BIT(POWER_DOMAIN_GMBUS) | \
> BIT(POWER_DOMAIN_INIT))
> -#define BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS ( \
> - BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
> - BIT(POWER_DOMAIN_PIPE_A) | \
> - BIT(POWER_DOMAIN_TRANSCODER_EDP) | \
> - BIT(POWER_DOMAIN_TRANSCODER_DSI_A) | \
> - BIT(POWER_DOMAIN_TRANSCODER_DSI_C) | \
> - BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) | \
> - BIT(POWER_DOMAIN_PORT_DDI_A_LANES) | \
> - BIT(POWER_DOMAIN_PORT_DSI) | \
> - BIT(POWER_DOMAIN_AUX_A) | \
> - BIT(POWER_DOMAIN_PLLS) | \
> - BIT(POWER_DOMAIN_INIT))
> #define BXT_DISPLAY_DC_OFF_POWER_DOMAINS ( \
> BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS | \
> BIT(POWER_DOMAIN_MODESET) | \
> BIT(POWER_DOMAIN_AUX_A) | \
> BIT(POWER_DOMAIN_INIT))
> #define BXT_DISPLAY_ALWAYS_ON_POWER_DOMAINS ( \
> - (POWER_DOMAIN_MASK & ~(BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS | \
> + (POWER_DOMAIN_MASK & ~( \
> BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS)) | \
> BIT(POWER_DOMAIN_INIT))
>
> @@ -1930,7 +1918,7 @@ static struct i915_power_well bxt_power_wells[] = {
> },
> {
> .name = "power well 1",
> - .domains = BXT_DISPLAY_POWERWELL_1_POWER_DOMAINS,
> + .domains = 0,
> .ops = &skl_power_well_ops,
> .data = SKL_DISP_PW_1,
> },
> @@ -2166,6 +2154,61 @@ static void skl_display_core_uninit(struct drm_i915_private *dev_priv)
> mutex_unlock(&power_domains->lock);
> }
>
> +void bxt_display_core_init(struct drm_i915_private *dev_priv,
> + bool resume)
> +{
> + struct i915_power_domains *power_domains = &dev_priv->power_domains;
> + struct i915_power_well *well;
> + uint32_t val;
> +
> + gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
> +
> + /*
> + * NDE_RSTWRN_OPT RST PCH Handshake En must always be 0b on BXT
> + * or else the reset will hang because there is no PCH to respond.
> + * Move the handshake programming to initialization sequence.
> + * Previously was left up to BIOS.
> + */
> + val = I915_READ(HSW_NDE_RSTWRN_OPT);
> + val &= ~RESET_PCH_HANDSHAKE_ENABLE;
> + I915_WRITE(HSW_NDE_RSTWRN_OPT, val);
> +
> + /* Enable PG1 */
> + mutex_lock(&power_domains->lock);
> +
> + well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
> + intel_power_well_enable(dev_priv, well);
> +
> + mutex_unlock(&power_domains->lock);
> +
> + broxton_init_cdclk(dev_priv);
> + broxton_ddi_phy_init(dev_priv);
> +
> + if (resume && dev_priv->csr.dmc_payload)
> + intel_csr_load_program(dev_priv);
> +}
> +
> +void bxt_display_core_uninit(struct drm_i915_private *dev_priv)
> +{
> + struct i915_power_domains *power_domains = &dev_priv->power_domains;
> + struct i915_power_well *well;
> +
> + gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
> +
> + broxton_ddi_phy_uninit(dev_priv);
> + broxton_uninit_cdclk(dev_priv);
> +
> + /* The spec doesn't call for removing the reset handshake flag */
> +
> + /* Disable PG1 */
> + mutex_lock(&power_domains->lock);
> +
> + well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
> + intel_power_well_disable(dev_priv, well);
> +
> + mutex_unlock(&power_domains->lock);
> +}
> +
> static void chv_phy_control_init(struct drm_i915_private *dev_priv)
> {
> struct i915_power_well *cmn_bc =
> @@ -2297,6 +2340,8 @@ void intel_power_domains_init_hw(struct drm_i915_private *dev_priv, bool resume)
>
> if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
> skl_display_core_init(dev_priv, resume);
> + } else if (IS_BROXTON(dev)) {
> + bxt_display_core_init(dev_priv, resume);
> } else if (IS_CHERRYVIEW(dev)) {
> mutex_lock(&power_domains->lock);
> chv_phy_control_init(dev_priv);
> @@ -2334,6 +2379,8 @@ void intel_power_domains_suspend(struct drm_i915_private *dev_priv)
>
> if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
> skl_display_core_uninit(dev_priv);
> + else if (IS_BROXTON(dev_priv))
> + bxt_display_core_uninit(dev_priv);
> }
>
> /**
> --
> 2.5.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list