[Intel-gfx] [PATCH v2 3/3] drm/i915: Get panel_type from OpRegion panel details

[Jani Nikula]

On Mon, 11 Apr 2016, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> We've had problems on several occasions with using the panel type
> from the VBT block 40. Usually it seems to be 2, which often
> doesn't give us the correct timings for the panel. After some
> more digging I found a way to get a panel type via the OpRegion
> SWSCI GBDA "Get Panel Details" method. Let's try to use it.
>
> The spec has this to say about the output:
> "Bits [15:8] - Panel Type
>  Bits contain the panel type user setting from CMOS
>  00h = Not Valid, use default Panel Type & Timings from VBT
>  01h - 0Fh = Panel Number"
>
> Another version of the spec lists the valid range as 1-16, which makes
> more sense since VBT supports 16 panels. Based on actual results
> from Rob's G45, 1-16 is what we need to accept.
>
> The other bits in the output don't look relevant for the problem at
> hand.
>
> The input is specified as:
> "Bits [31:4] - Reserved
>  Reserved (must be zero)
>  Bits [3:0] - Panel Number
>  These bits contain the sequential index of Panel, starting at 0 and
>  counting upwards from the first integrated Internal Flat-Panel Display
>  Encoder present, and then from the first external Display Encoder
>  (e.g., S/DVO-B then S/DVO-C) which supports Internal Flat-Panels.
>  0h - 0Fh = Panel number"
>
> For now I've just hardcoded the input panel number as 0. That would seem
> like a decent choise for LVDS. Not so sure about eDP when port != A.
>
> v2: Accept values 1-16
>     Filter out bogus results in opregion code (Jani)
>     Add debug logging for all the different branches (Jani)
>
> Cc: Jani Nikula <jani.nikula at linux.intel.com>
> Cc: Rob Kramer <rob at solution-space.com>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94825
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

So I don't know if this is the right thing to do or not, and we'll only
find out with testing, but the code looks good to me.

With that caveat,

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

> ---
>  drivers/gpu/drm/i915/i915_drv.h       |  5 +++++
>  drivers/gpu/drm/i915/intel_bios.c     | 20 +++++++++++++++-----
>  drivers/gpu/drm/i915/intel_opregion.c | 28 ++++++++++++++++++++++++++++
>  3 files changed, 48 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 53ace572b292..42234e17b789 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -3421,6 +3421,7 @@ extern int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder,
>  					 bool enable);
>  extern int intel_opregion_notify_adapter(struct drm_device *dev,
>  					 pci_power_t state);
> +extern int intel_opregion_get_panel_type(struct drm_device *dev);
>  #else
>  static inline int intel_opregion_setup(struct drm_device *dev) { return 0; }
>  static inline void intel_opregion_init(struct drm_device *dev) { return; }
> @@ -3436,6 +3437,10 @@ intel_opregion_notify_adapter(struct drm_device *dev, pci_power_t state)
>  {
>  	return 0;
>  }
> +static inline int intel_opregion_get_panel_type(struct drm_device *dev)
> +{
> +	return -ENODEV;
> +}
>  #endif
>  
>  /* intel_acpi.c */
> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> index d595ca30a7e1..e72dd9a8d6bf 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -205,19 +205,29 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv,
>  	struct drm_display_mode *panel_fixed_mode;
>  	int panel_type;
>  	int drrs_mode;
> +	int ret;
>  
>  	lvds_options = find_section(bdb, BDB_LVDS_OPTIONS);
>  	if (!lvds_options)
>  		return;
>  
>  	dev_priv->vbt.lvds_dither = lvds_options->pixel_dither;
> -	if (lvds_options->panel_type > 0xf) {
> -		DRM_DEBUG_KMS("Invalid VBT panel type 0x%x\n",
> -			      lvds_options->panel_type);
> -		return;
> +
> +	ret = intel_opregion_get_panel_type(dev_priv->dev);
> +	if (ret >= 0) {
> +		WARN_ON(ret > 0xf);
> +		panel_type = ret;
> +		DRM_DEBUG_KMS("Panel type: %d (OpRegion)\n", panel_type);
> +	} else {
> +		if (lvds_options->panel_type > 0xf) {
> +			DRM_DEBUG_KMS("Invalid VBT panel type 0x%x\n",
> +				      lvds_options->panel_type);
> +			return;
> +		}
> +		panel_type = lvds_options->panel_type;
> +		DRM_DEBUG_KMS("Panel type: %d (VBT)\n", panel_type);
>  	}
>  
> -	panel_type = lvds_options->panel_type;
>  	dev_priv->vbt.panel_type = panel_type;
>  
>  	drrs_mode = (lvds_options->dps_panel_type_bits
> diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
> index c15718b4862a..d3c4945a0e36 100644
> --- a/drivers/gpu/drm/i915/intel_opregion.c
> +++ b/drivers/gpu/drm/i915/intel_opregion.c
> @@ -1024,3 +1024,31 @@ err_out:
>  	memunmap(base);
>  	return err;
>  }
> +
> +int
> +intel_opregion_get_panel_type(struct drm_device *dev)
> +{
> +	u32 panel_details;
> +	int ret;
> +
> +	ret = swsci(dev, SWSCI_GBDA_PANEL_DETAILS, 0x0, &panel_details);
> +	if (ret) {
> +		DRM_DEBUG_KMS("Failed to get panel details from OpRegion (%d)\n",
> +			      ret);
> +		return ret;
> +	}
> +
> +	ret = (panel_details >> 8) & 0xff;
> +	if (ret > 0x10) {
> +		DRM_DEBUG_KMS("Invalid OpRegion panel type 0x%x\n", ret);
> +		return -EINVAL;
> +	}
> +
> +	/* fall back to VBT panel type? */
> +	if (ret == 0x0) {
> +		DRM_DEBUG_KMS("No panel type in OpRegion\n");
> +		return -ENODEV;
> +	}
> +
> +	return ret - 1;
> +}

-- 
Jani Nikula, Intel Open Source Technology Center