[Intel-gfx] [PATCH 2/2] drm/i915/BXT: Tolerance at BXT DSI pipe_config comparison

[Ramalingam C]

On Wednesday 13 April 2016 05:27 PM, Daniel Vetter wrote:
> On Wed, Apr 13, 2016 at 1:48 PM, Daniel Vetter <daniel at ffwll.ch> wrote:
>> On Wed, Apr 13, 2016 at 1:06 PM, Jani Nikula <jani.nikula at intel.com> wrote:
>>>> Then fix adjusted_mode to have the timings in terms of txbyteclkhs
>>>> already. Problem solved.
>>> I let Ville convince me there would be problems with that. Ville, care
>>> to fill in the details?
>> If we change them too hard the accurate vblank timestamp stuff will be
>> upset. But then we only need to adjust horizontal timings for dsi,
>> whereas on gen5+ the vblank ts code uses the line counter (i.e.
>> vertical timings) only.
>>
>> If it's just that it should work, and I don't think we have any other
>> users of the adjusted_mode.
> Ok, I was wrong and we obviously need the right dotclock to compute
> linedur_ns correctly in drm_calc_timestamping_constants(). So either
> we adjust the dotclock of adjusted_mode too (imo makes most sense), or
> we need yet another mode somewhere and use that for dsi cross checking
> (real ugly imo). More I missed?
Another point to be considered:
And we program hsync, hfp and hbp in terms of txbyteclkhs to port 
register, which are not part of adjusted_mode.
So for BXT DSI, we have to store them interms of txbyteclkhs and compare 
with hsync, hfp and hbp read from HW??
> -Daniel

-- 
Thanks,
--Ram