[Intel-gfx] ✗ Fi.CI.BAT: failure for drm/i915: Rest of my DSI and DPLL stuff

[Ville Syrjälä]

On Wed, Apr 13, 2016 at 04:02:17PM -0000, Patchwork wrote:
> == Series Details ==
> 
> Series: drm/i915: Rest of my DSI and DPLL stuff
> URL   : https://patchwork.freedesktop.org/series/5610/
> State : failure
> 
> == Summary ==
> 
> Series 5610v1 drm/i915: Rest of my DSI and DPLL stuff
> http://patchwork.freedesktop.org/api/1.0/series/5610/revisions/1/mbox/
> 
> Test drv_hangman:
>         Subgroup error-state-basic:
>                 pass       -> DMESG-WARN (ilk-hp8440p)
> Test gem_busy:
>         Subgroup basic-bsd:
>                 pass       -> SKIP       (ilk-hp8440p)
>         Subgroup basic-render:
>                 pass       -> SKIP       (ilk-hp8440p)
> Test gem_cpu_reloc:
>         Subgroup basic:
>                 pass       -> FAIL       (ilk-hp8440p)

...

[  265.316531] drm/i915: Resetting chip after gpu hang
[  265.316585] [drm:i915_reset [i915]] *ERROR* Failed to reset chip: -110

Looks like the GPU died for some reason.

> Test kms_force_connector_basic:
>         Subgroup prune-stale-modes:
>                 pass       -> SKIP       (ivb-t430s)

No clue what happened here. The change isn't visible in the results
visualization page, nor can I see this subtest even being run in
the dmesg for Patchwork_1881. The dmesg ends at gtt-blt, but based on
the json there were a ton of tests run after that. In fact the json
and dmesg seem totally out of sync.

Tomi, any idea what's going on here?

> Test kms_pipe_crc_basic:
>         Subgroup hang-read-crc-pipe-a:
>                 pass       -> FAIL       (ilk-hp8440p)
>         Subgroup hang-read-crc-pipe-b:
>                 pass       -> FAIL       (ilk-hp8440p)
>         Subgroup hang-read-crc-pipe-c:
>                 skip       -> FAIL       (ilk-hp8440p)
>         Subgroup suspend-read-crc-pipe-a:
>                 pass       -> DMESG-FAIL (ilk-hp8440p)
>         Subgroup suspend-read-crc-pipe-b:
>                 pass       -> DMESG-FAIL (ilk-hp8440p)
> 
> bdw-nuci7        total:203  pass:191  dwarn:0   dfail:0   fail:0   skip:12 
> bsw-nuc-2        total:202  pass:163  dwarn:0   dfail:0   fail:0   skip:39 
> byt-nuc          total:202  pass:164  dwarn:0   dfail:0   fail:0   skip:38 
> hsw-brixbox      total:203  pass:179  dwarn:0   dfail:0   fail:0   skip:24 
> hsw-gt2          total:203  pass:184  dwarn:0   dfail:0   fail:0   skip:19 
> ilk-hp8440p      total:203  pass:105  dwarn:1   dfail:2   fail:22  skip:73 
> ivb-t430s        total:203  pass:174  dwarn:0   dfail:0   fail:0   skip:29 
> skl-i7k-2        total:203  pass:178  dwarn:0   dfail:0   fail:0   skip:25 
> skl-nuci5        total:203  pass:192  dwarn:0   dfail:0   fail:0   skip:11 
> snb-dellxps      total:203  pass:165  dwarn:0   dfail:0   fail:0   skip:38 
> snb-x220t        total:203  pass:165  dwarn:0   dfail:0   fail:1   skip:37 
> BOOT FAILED for bdw-ultra
> 
> Results at /archive/results/CI_IGT_test/Patchwork_1881/
> 
> 631ffd2f45bb43964f729e8661532fb115f5eeec drm-intel-nightly: 2016y-04m-13d-13h-00m-18s UTC integration manifest
> cb48288 drm/i915: Reject 'Center' scaling mode for eDP/DSI on GMCH platforms
> 9498c94 drm/i915: Hook up pfit for DSI
> b94623e drm/i915: Eliminate {vlv, bxt}_configure_dsi_pll()
> 546b2ef drm/i915: Compute DSI PLL parameters during .compute_config()
> ae0326a drm/i915: Setup DPLL/DPLLMD for DSI too on VLV/CHV

-- 
Ville Syrjälä
Intel OTC