[Intel-gfx] [PATCH] drm/i915: Get audio power domain during initial hw readout

[Ville Syrjälä]

On Wed, Apr 13, 2016 at 11:19:20AM -0700, Bob Paauwe wrote:
> On Wed, 13 Apr 2016 11:59:43 +0300
> Ville Syrjälä <ville.syrjala at linux.intel.com> wrote:
> 
> > On Tue, Apr 12, 2016 at 03:52:48PM -0700, Bob Paauwe wrote:
> > > if the crtc has audio is enabled. Otherwise, when the first atomic
> > > modeset happens it will warn when trying to drop the audio power
> > > domain.
> > > 
> > > Signed-off-by: Bob Paauwe <bob.j.paauwe at intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/intel_display.c | 5 +++++
> > >  1 file changed, 5 insertions(+)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > > index 5155efb6..caeb3e1 100644
> > > --- a/drivers/gpu/drm/i915/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/intel_display.c
> > > @@ -10561,6 +10561,7 @@ found:
> > >  	}
> > >  
> > >  	ret = intel_modeset_setup_plane_state(state, crtc, mode, fb, 0, 0);
> > > +
> > >  	if (ret)
> > >  		goto fail;
> > >  
> > > @@ -15998,6 +15999,10 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
> > >  
> > >  		memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
> > >  		if (crtc->base.state->active) {
> > > +			if (crtc->config->has_audio)
> > > +				intel_display_power_get(dev_priv,
> > > +							POWER_DOMAIN_AUDIO);
> > > +  
> > 
> > Hmm. Ideally we would do this alongside the other power doamin stuff in
> > intel_modeset_setup_hw_state(), but that's too late for
> > intel_sanitize_{crtc,encoder}(). So I guess we'll have to do it before
> > those, or we have to pull the audio power domain stuff out from the
> > encoder hooks. Or perhaps even throw it out entirely, since I'm not sure
> > it's doing anything for us.
> > 
> > If we do leave the power domain handling in the encoder hooks, then
> > this is not quite the right place to grab the reference. We could have
> > an encoder enabled w/o an active pipe, in which case
> > intel_sanitize_encoder() would shut off the encoder, so we'd still end
> > up with a bad refcount.
> >
> 
> Thanks Ville for the details.  I'm not at all familiar with how this is
> supposed to work so this helps some.  But I'm still not sure I follow.
> 
> If I move this to get_crtc_power_domains() by sticking 
> 
>    if (crtc_state->has_audio)
> 	mask |= BIT(POWER_DOMAIN_AUDIO);
> 
> at the end, which is where I think you're suggesting initially, it
> seems to work.  So I'm not sure why that's too late.  Also, I'm not
> seeing where shutting off the encoder will effect the power domain
> refcounts.

Some of the encoder hooks will do the POWER_DOMAIN_AUDIO put/get, so if
sanitize_{crtc,encoder}() call just the disable hooks, we'll drop one to
many power references.

That said, I'm still not sure why we do the audio power domain frobbing
in the encoder code. That is, how can we end up enabling/disabling a port
with has_audio==true without the relevant power wells being on already.

Looks like some of this stuff was added in
commit d45a0bf549cd ("drm/i915: grab the audio power domain when enabling audio on HSW+")
so maybe Paulo knows?

-- 
Ville Syrjälä
Intel OTC