[Intel-gfx] [PATCH v6 3/4] drm/dp_helper: Perform throw-away read before actual read in drm_dp_dpcd_read()
Ville Syrjälä
ville.syrjala at linux.intel.com
Fri Apr 15 14:31:02 UTC 2016
On Fri, Apr 15, 2016 at 10:25:35AM -0400, Lyude wrote:
> This is part of a patch series to migrate all of the workarounds for
> commonly seen behavior from bad sinks in intel_dp_dpcd_read_wake() to drm's
> DP helper.
>
> Some sinks will just return garbage for the first aux tranaction they
> receive when coming out of sleep mode, so we need to perform an additional
> read before the actual read to workaround this.
>
> Changes since v5
> - If the throwaway read in drm_dp_dpcd_read() fails, return the error
> from that instead of continuing. This follows the same logic we do in
> drm_dp_dpcd_access() (e.g. the error from the first transaction may
> differ from the errors that proceeding attempts might return).
>
> Signed-off-by: Lyude <cpaul at redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/drm_dp_helper.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index 540c3e4..eeaf5a7 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -248,6 +248,25 @@ unlock:
> ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset,
> void *buffer, size_t size)
> {
> + int ret;
> +
> + /*
> + * HP ZR24w corrupts the first DPCD access after entering power save
> + * mode. Eg. on a read, the entire buffer will be filled with the same
> + * byte. Do a throw away read to avoid corrupting anything we care
> + * about. Afterwards things will work correctly until the monitor
> + * gets woken up and subsequently re-enters power save mode.
> + *
> + * The user pressing any button on the monitor is enough to wake it
> + * up, so there is no particularly good place to do the workaround.
> + * We just have to do it before any DPCD access and hope that the
> + * monitor doesn't power down exactly after the throw away read.
> + */
> + ret = drm_dp_dpcd_access(aux, DP_AUX_NATIVE_READ, DP_DPCD_REV, buffer,
> + 1);
> + if (ret != 1)
> + return ret;
> +
> return drm_dp_dpcd_access(aux, DP_AUX_NATIVE_READ, offset, buffer,
> size);
> }
> --
> 2.5.5
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list