[Intel-gfx] ✗ Fi.CI.BAT: failure for drm/i915: Fix a few suspend/resume and driver unload bugs (rev3)

[Imre Deak]

On ma, 2016-04-18 at 13:57 +0000, Patchwork wrote:
> == Series Details ==
> 
> Series: drm/i915: Fix a few suspend/resume and driver unload bugs
> (rev3)
> URL   : https://patchwork.freedesktop.org/series/5856/
> State : failure
> 
> == Summary ==
> 
> Series 5856v3 drm/i915: Fix a few suspend/resume and driver unload
> bugs
> http://patchwork.freedesktop.org/api/1.0/series/5856/revisions/3/mbox
> /
> 
> Test gem_exec_whisper:
>         Subgroup basic:
>                 incomplete -> PASS       (bdw-nuci7)
> Test kms_flip:
>         Subgroup basic-flip-vs-dpms:
>                 pass       -> DMESG-WARN (skl-i7k-2)

Pre-existing issue from an earlier CI run, intel_atomic_commit()
failure during DPMS set property followed by a wait for vblank timeout:
http://benchsrv.fi.intel.com//archive/results/CI_IGT_test/CI_DRM_1177/skl-i7k-2/html/skl-i7k-2@CI_DRM_1177@1/igt@kms_flip@basic-flip-vs-dpms.html

I opened a new bug for this:
https://bugs.freedesktop.org/show_bug.cgi?id=94992

>         Subgroup basic-flip-vs-modeset:
>                 pass       -> DMESG-WARN (skl-i7k-2)
Pre-existing issue from an earlier CI run, intel_atomic_commit()
failure during set CRTC IOCTL followed by a wait for vblank timeout:
http://benchsrv.fi.intel.com//archive/results/CI_IGT_test/CI_DRM_1224/skl-i7k-2/html/skl-i7k-2@CI_DRM_1224@1/igt@kms_flip@basic-flip-vs-modeset.html

I opened a new bug for this:
https://bugs.freedesktop.org/show_bug.cgi?id=94993

>         Subgroup basic-flip-vs-wf_vblank:
>                 pass       -> FAIL       (snb-x220t)

Pre-existing 1 frame jitter bug:
https://bugs.freedesktop.org/show_bug.cgi?id=94294

> Test kms_pipe_crc_basic:
>         Subgroup read-crc-pipe-c:
>                 pass       -> SKIP       (hsw-brixbox)

Looks like a problem with detecting the display output (HDMI):
"""
Test requirement not met in function test_read_crc, file kms_pipe_crc_basic.c:178:
Test requirement: valid_connectors
No connector found for pipe 2
"""

Maybe the live status check is acting up? There were previous cases
where CI didn't run this test on hsw-brixbox:
http://benchsrv.fi.intel.com/archive/results/CI_IGT_test/igt@kms_pipe_crc_basic@read-crc-pipe-c.html

> 
> bdw-
> nuci7        total:203  pass:191  dwarn:0   dfail:0   fail:0   skip:1
> 2 
> bdw-
> ultra        total:203  pass:180  dwarn:0   dfail:0   fail:0   skip:2
> 3 
> bsw-nuc-
> 2        total:202  pass:163  dwarn:0   dfail:0   fail:0   skip:39 
> byt-
> nuc          total:202  pass:164  dwarn:0   dfail:0   fail:0   skip:3
> 8 
> hsw-
> brixbox      total:203  pass:178  dwarn:0   dfail:0   fail:0   skip:2
> 5 
> hsw-
> gt2          total:203  pass:184  dwarn:0   dfail:0   fail:0   skip:1
> 9 
> ilk-
> hp8440p      total:203  pass:135  dwarn:0   dfail:0   fail:0   skip:6
> 8 
> ivb-
> t430s        total:203  pass:175  dwarn:0   dfail:0   fail:0   skip:2
> 8 
> skl-i7k-
> 2        total:203  pass:176  dwarn:2   dfail:0   fail:0   skip:25 
> skl-
> nuci5        total:203  pass:192  dwarn:0   dfail:0   fail:0   skip:1
> 1 
> snb-
> dellxps      total:203  pass:165  dwarn:0   dfail:0   fail:0   skip:3
> 8 
> snb-
> x220t        total:203  pass:164  dwarn:0   dfail:0   fail:2   skip:3
> 7 
> 
> Results at /archive/results/CI_IGT_test/Patchwork_1927/
> 
> 78673b24b60c1a884c947ee5a45ad860ca618418 drm-intel-nightly: 2016y-
> 04m-18d-12h-32m-33s UTC integration manifest
> a0cb3b0 drm/i915/gen9: Fix runtime PM refcounting in case DMC
> firmware isn't loaded
> c48ce3c drm/i915/ddi: Fix eDP VDD handling during booting and
> suspend/resume
> e2672e0 drm/i915: Fix system resume if PCI device remained enabled
> 5e7b1ad drm/i915: Fix error path in i915_drm_resume_early
>