[Intel-gfx] [PATCH v2 02/10] drm/i915: Unduplicate CHV signal level code
Jim Bride
jim.bride at linux.intel.com
Wed Apr 20 19:13:20 UTC 2016
On Wed, Apr 13, 2016 at 08:47:45PM +0300, Ander Conselvan de Oliveira wrote:
> The code for programming voltage swing and emphasis was duplicated
> between DP and HDMI code. Move that to a new file, intel_dpio_phy.c.
>
> v2: Keep the "Use 800mV-0dB" comment in the HDMI code. (Ville)
> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
Reviewed-by: Jim Bride <jim.bride at linux.intel.com>
> ---
> drivers/gpu/drm/i915/Makefile | 1 +
> drivers/gpu/drm/i915/i915_drv.h | 5 ++
> drivers/gpu/drm/i915/intel_dp.c | 103 ++--------------------------
> drivers/gpu/drm/i915/intel_dpio_phy.c | 122 ++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_hdmi.c | 70 +------------------
> 5 files changed, 136 insertions(+), 165 deletions(-)
> create mode 100644 drivers/gpu/drm/i915/intel_dpio_phy.c
>
> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> index 7ffb51b..eb45e28 100644
> --- a/drivers/gpu/drm/i915/Makefile
> +++ b/drivers/gpu/drm/i915/Makefile
> @@ -57,6 +57,7 @@ i915-y += intel_audio.o \
> intel_bios.o \
> intel_color.o \
> intel_display.o \
> + intel_dpio_phy.o \
> intel_dpll_mgr.o \
> intel_fbc.o \
> intel_fifo_underrun.o \
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index f5c91b0..233198d 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -3554,6 +3554,11 @@ void intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
> u32 vlv_flisdsi_read(struct drm_i915_private *dev_priv, u32 reg);
> void vlv_flisdsi_write(struct drm_i915_private *dev_priv, u32 reg, u32 val);
>
> +/* intel_dpio_phy.c */
> +void chv_set_phy_signal_level(struct intel_encoder *encoder,
> + u32 deemph_reg_value, u32 margin_reg_value,
> + bool uniq_trans_scale);
> +
> int intel_gpu_freq(struct drm_i915_private *dev_priv, int val);
> int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 1b89e2b..c2f774c 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3339,23 +3339,12 @@ static uint32_t vlv_signal_levels(struct intel_dp *intel_dp)
> return 0;
> }
>
> -static bool chv_need_uniq_trans_scale(uint8_t train_set)
> -{
> - return (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) == DP_TRAIN_PRE_EMPH_LEVEL_0 &&
> - (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) == DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
> -}
> -
> static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
> {
> - struct drm_device *dev = intel_dp_to_dev(intel_dp);
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
> - struct intel_crtc *intel_crtc = to_intel_crtc(dport->base.base.crtc);
> - u32 deemph_reg_value, margin_reg_value, val;
> + struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
> + u32 deemph_reg_value, margin_reg_value;
> + bool uniq_trans_scale = false;
> uint8_t train_set = intel_dp->train_set[0];
> - enum dpio_channel ch = vlv_dport_to_channel(dport);
> - enum pipe pipe = intel_crtc->pipe;
> - int i;
>
> switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
> case DP_TRAIN_PRE_EMPH_LEVEL_0:
> @@ -3375,7 +3364,7 @@ static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
> case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
> deemph_reg_value = 128;
> margin_reg_value = 154;
> - /* FIXME extra to set for 1200 */
> + uniq_trans_scale = true;
> break;
> default:
> return 0;
> @@ -3427,88 +3416,8 @@ static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
> return 0;
> }
>
> - mutex_lock(&dev_priv->sb_lock);
> -
> - /* Clear calc init */
> - val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
> - val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
> - val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
> - val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
> -
> - if (intel_crtc->config->lane_count > 2) {
> - val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
> - val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
> - val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
> - val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
> - }
> -
> - val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
> - val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
> - val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
> -
> - if (intel_crtc->config->lane_count > 2) {
> - val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
> - val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
> - val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
> - }
> -
> - /* Program swing deemph */
> - for (i = 0; i < intel_crtc->config->lane_count; i++) {
> - val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
> - val &= ~DPIO_SWING_DEEMPH9P5_MASK;
> - val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT;
> - vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val);
> - }
> -
> - /* Program swing margin */
> - for (i = 0; i < intel_crtc->config->lane_count; i++) {
> - val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
> -
> - val &= ~DPIO_SWING_MARGIN000_MASK;
> - val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT;
> -
> - /*
> - * Supposedly this value shouldn't matter when unique transition
> - * scale is disabled, but in fact it does matter. Let's just
> - * always program the same value and hope it's OK.
> - */
> - val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
> - val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT;
> -
> - vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
> - }
> -
> - /*
> - * The document said it needs to set bit 27 for ch0 and bit 26
> - * for ch1. Might be a typo in the doc.
> - * For now, for this unique transition scale selection, set bit
> - * 27 for ch0 and ch1.
> - */
> - for (i = 0; i < intel_crtc->config->lane_count; i++) {
> - val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
> - if (chv_need_uniq_trans_scale(train_set))
> - val |= DPIO_TX_UNIQ_TRANS_SCALE_EN;
> - else
> - val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
> - vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
> - }
> -
> - /* Start swing calculation */
> - val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
> - val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
> -
> - if (intel_crtc->config->lane_count > 2) {
> - val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
> - val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
> - }
> -
> - mutex_unlock(&dev_priv->sb_lock);
> + chv_set_phy_signal_level(encoder, deemph_reg_value,
> + margin_reg_value, uniq_trans_scale);
>
> return 0;
> }
> diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c b/drivers/gpu/drm/i915/intel_dpio_phy.c
> new file mode 100644
> index 0000000..cbe1703d
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/intel_dpio_phy.c
> @@ -0,0 +1,122 @@
> +/*
> + * Copyright © 2014-2016 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> + * DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "intel_drv.h"
> +
> +void chv_set_phy_signal_level(struct intel_encoder *encoder,
> + u32 deemph_reg_value, u32 margin_reg_value,
> + bool uniq_trans_scale)
> +{
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
> + struct intel_crtc *intel_crtc = to_intel_crtc(dport->base.base.crtc);
> + enum dpio_channel ch = vlv_dport_to_channel(dport);
> + enum pipe pipe = intel_crtc->pipe;
> + u32 val;
> + int i;
> +
> + mutex_lock(&dev_priv->sb_lock);
> +
> + /* Clear calc init */
> + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
> + val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
> + val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
> + val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
> + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
> +
> + if (intel_crtc->config->lane_count > 2) {
> + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
> + val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
> + val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
> + val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
> + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
> + }
> +
> + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
> + val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
> + val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
> + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
> +
> + if (intel_crtc->config->lane_count > 2) {
> + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
> + val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
> + val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
> + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
> + }
> +
> + /* Program swing deemph */
> + for (i = 0; i < intel_crtc->config->lane_count; i++) {
> + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
> + val &= ~DPIO_SWING_DEEMPH9P5_MASK;
> + val |= deemph_reg_value << DPIO_SWING_DEEMPH9P5_SHIFT;
> + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val);
> + }
> +
> + /* Program swing margin */
> + for (i = 0; i < intel_crtc->config->lane_count; i++) {
> + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
> +
> + val &= ~DPIO_SWING_MARGIN000_MASK;
> + val |= margin_reg_value << DPIO_SWING_MARGIN000_SHIFT;
> +
> + /*
> + * Supposedly this value shouldn't matter when unique transition
> + * scale is disabled, but in fact it does matter. Let's just
> + * always program the same value and hope it's OK.
> + */
> + val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
> + val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT;
> +
> + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
> + }
> +
> + /*
> + * The document said it needs to set bit 27 for ch0 and bit 26
> + * for ch1. Might be a typo in the doc.
> + * For now, for this unique transition scale selection, set bit
> + * 27 for ch0 and ch1.
> + */
> + for (i = 0; i < intel_crtc->config->lane_count; i++) {
> + val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
> + if (uniq_trans_scale)
> + val |= DPIO_TX_UNIQ_TRANS_SCALE_EN;
> + else
> + val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
> + vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
> + }
> +
> + /* Start swing calculation */
> + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
> + val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
> + vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
> +
> + if (intel_crtc->config->lane_count > 2) {
> + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
> + val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
> + vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
> + }
> +
> + mutex_unlock(&dev_priv->sb_lock);
> +
> +}
> +
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index 80d9841..eed46c2 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -1913,77 +1913,11 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
> /* Deassert data lane reset */
> chv_data_lane_soft_reset(encoder, false);
>
> - /* Clear calc init */
> - val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
> - val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
> - val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
> - val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
> -
> - val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
> - val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
> - val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
> - val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
> -
> - val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
> - val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
> - val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
> -
> - val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
> - val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
> - val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
> + mutex_unlock(&dev_priv->sb_lock);
>
> /* FIXME: Program the support xxx V-dB */
> /* Use 800mV-0dB */
> - for (i = 0; i < 4; i++) {
> - val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
> - val &= ~DPIO_SWING_DEEMPH9P5_MASK;
> - val |= 128 << DPIO_SWING_DEEMPH9P5_SHIFT;
> - vlv_dpio_write(dev_priv, pipe, CHV_TX_DW4(ch, i), val);
> - }
> -
> - for (i = 0; i < 4; i++) {
> - val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW2(ch, i));
> -
> - val &= ~DPIO_SWING_MARGIN000_MASK;
> - val |= 102 << DPIO_SWING_MARGIN000_SHIFT;
> -
> - /*
> - * Supposedly this value shouldn't matter when unique transition
> - * scale is disabled, but in fact it does matter. Let's just
> - * always program the same value and hope it's OK.
> - */
> - val &= ~(0xff << DPIO_UNIQ_TRANS_SCALE_SHIFT);
> - val |= 0x9a << DPIO_UNIQ_TRANS_SCALE_SHIFT;
> -
> - vlv_dpio_write(dev_priv, pipe, CHV_TX_DW2(ch, i), val);
> - }
> -
> - /*
> - * The document said it needs to set bit 27 for ch0 and bit 26
> - * for ch1. Might be a typo in the doc.
> - * For now, for this unique transition scale selection, set bit
> - * 27 for ch0 and ch1.
> - */
> - for (i = 0; i < 4; i++) {
> - val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW3(ch, i));
> - val &= ~DPIO_TX_UNIQ_TRANS_SCALE_EN;
> - vlv_dpio_write(dev_priv, pipe, CHV_TX_DW3(ch, i), val);
> - }
> -
> - /* Start swing calculation */
> - val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
> - val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
> -
> - val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
> - val |= DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3;
> - vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
> -
> - mutex_unlock(&dev_priv->sb_lock);
> + chv_set_phy_signal_level(encoder, 128, 102, false);
>
> intel_hdmi->set_infoframes(&encoder->base,
> intel_crtc->config->has_hdmi_sink,
> --
> 2.4.11
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list