[Intel-gfx] [PATCH v3 03/16] drm/i915/gen9: Cache plane data rates in CRTC state
Matt Roper
matthew.d.roper at intel.com
Thu Apr 21 23:16:57 UTC 2016
This will be important when we start calculating CRTC data rates for
in-flight CRTC states since it will allow us to calculate the total data
rate without needing to grab the plane state for any planes that aren't
updated by the transaction.
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
drivers/gpu/drm/i915/intel_drv.h | 4 ++
drivers/gpu/drm/i915/intel_pm.c | 92 ++++++++++++++++++++++++++--------------
2 files changed, 63 insertions(+), 33 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index a94d651a..e67438f 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -426,6 +426,10 @@ struct intel_crtc_wm_state {
struct {
/* gen9+ only needs 1-step wm programming */
struct skl_pipe_wm optimal;
+
+ /* cached plane data rate */
+ unsigned plane_data_rate[I915_MAX_PLANES];
+ unsigned plane_y_data_rate[I915_MAX_PLANES];
} skl;
};
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 7a4dc9d..7e4b149 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2940,6 +2940,14 @@ skl_plane_relative_data_rate(const struct intel_crtc_state *cstate,
struct intel_plane_state *intel_pstate = to_intel_plane_state(pstate);
struct drm_framebuffer *fb = pstate->fb;
uint32_t width = 0, height = 0;
+ unsigned format = fb ? fb->pixel_format : DRM_FORMAT_XRGB8888;
+
+ if (!intel_pstate->visible)
+ return 0;
+ if (pstate->plane->type == DRM_PLANE_TYPE_CURSOR)
+ return 0;
+ if (y && format != DRM_FORMAT_NV12)
+ return 0;
width = drm_rect_width(&intel_pstate->src) >> 16;
height = drm_rect_height(&intel_pstate->src) >> 16;
@@ -2948,17 +2956,17 @@ skl_plane_relative_data_rate(const struct intel_crtc_state *cstate,
swap(width, height);
/* for planar format */
- if (fb->pixel_format == DRM_FORMAT_NV12) {
+ if (format == DRM_FORMAT_NV12) {
if (y) /* y-plane data rate */
return width * height *
- drm_format_plane_cpp(fb->pixel_format, 0);
+ drm_format_plane_cpp(format, 0);
else /* uv-plane data rate */
return (width / 2) * (height / 2) *
- drm_format_plane_cpp(fb->pixel_format, 1);
+ drm_format_plane_cpp(format, 1);
}
/* for packed formats */
- return width * height * drm_format_plane_cpp(fb->pixel_format, 0);
+ return width * height * drm_format_plane_cpp(format, 0);
}
/*
@@ -2967,32 +2975,34 @@ skl_plane_relative_data_rate(const struct intel_crtc_state *cstate,
* 3 * 4096 * 8192 * 4 < 2^32
*/
static unsigned int
-skl_get_total_relative_data_rate(const struct intel_crtc_state *cstate)
+skl_get_total_relative_data_rate(struct intel_crtc_state *cstate)
{
struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
struct drm_device *dev = intel_crtc->base.dev;
const struct intel_plane *intel_plane;
- unsigned int total_data_rate = 0;
+ unsigned int rate, total_data_rate = 0;
+ /* Calculate and cache data rate for each plane */
for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
const struct drm_plane_state *pstate = intel_plane->base.state;
+ int id = skl_wm_plane_id(intel_plane);
- if (pstate->fb == NULL)
- continue;
+ /* packed/uv */
+ rate = skl_plane_relative_data_rate(cstate, pstate, 0);
+ cstate->wm.skl.plane_data_rate[id] = rate;
- if (intel_plane->base.type == DRM_PLANE_TYPE_CURSOR)
- continue;
+ /* y-plane */
+ rate = skl_plane_relative_data_rate(cstate, pstate, 1);
+ cstate->wm.skl.plane_y_data_rate[id] = rate;
+ }
- /* packed/uv */
- total_data_rate += skl_plane_relative_data_rate(cstate,
- pstate,
- 0);
+ /* Calculate CRTC's total data rate from cached values */
+ for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
+ int id = skl_wm_plane_id(intel_plane);
- if (pstate->fb->pixel_format == DRM_FORMAT_NV12)
- /* y-plane */
- total_data_rate += skl_plane_relative_data_rate(cstate,
- pstate,
- 1);
+ /* packed/uv */
+ total_data_rate += cstate->wm.skl.plane_data_rate[id];
+ total_data_rate += cstate->wm.skl.plane_y_data_rate[id];
}
return total_data_rate;
@@ -3056,6 +3066,8 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
* FIXME: we may not allocate every single block here.
*/
total_data_rate = skl_get_total_relative_data_rate(cstate);
+ if (total_data_rate == 0)
+ return;
start = alloc->start;
for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
@@ -3070,7 +3082,7 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
if (plane->type == DRM_PLANE_TYPE_CURSOR)
continue;
- data_rate = skl_plane_relative_data_rate(cstate, pstate, 0);
+ data_rate = cstate->wm.skl.plane_data_rate[id];
/*
* allocation for (packed formats) or (uv-plane part of planar format):
@@ -3089,20 +3101,16 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
/*
* allocation for y_plane part of planar format:
*/
- if (pstate->fb->pixel_format == DRM_FORMAT_NV12) {
- y_data_rate = skl_plane_relative_data_rate(cstate,
- pstate,
- 1);
- y_plane_blocks = y_minimum[id];
- y_plane_blocks += div_u64((uint64_t)alloc_size * y_data_rate,
- total_data_rate);
-
- ddb->y_plane[pipe][id].start = start;
- ddb->y_plane[pipe][id].end = start + y_plane_blocks;
-
- start += y_plane_blocks;
- }
+ y_data_rate = cstate->wm.skl.plane_y_data_rate[id];
+
+ y_plane_blocks = y_minimum[id];
+ y_plane_blocks += div_u64((uint64_t)alloc_size * y_data_rate,
+ total_data_rate);
+ ddb->y_plane[pipe][id].start = start;
+ ddb->y_plane[pipe][id].end = start + y_plane_blocks;
+
+ start += y_plane_blocks;
}
}
@@ -3879,10 +3887,28 @@ void skl_wm_get_hw_state(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
struct skl_ddb_allocation *ddb = &dev_priv->wm.skl_hw.ddb;
struct drm_crtc *crtc;
+ struct intel_crtc *intel_crtc;
skl_ddb_get_hw_state(dev_priv, ddb);
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
skl_pipe_wm_get_hw_state(crtc);
+
+ /* Calculate plane data rates */
+ for_each_intel_crtc(dev, intel_crtc) {
+ struct intel_crtc_state *cstate = intel_crtc->config;
+ struct intel_plane *intel_plane;
+
+ for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
+ const struct drm_plane_state *pstate =
+ intel_plane->base.state;
+ int id = skl_wm_plane_id(intel_plane);
+
+ cstate->wm.skl.plane_data_rate[id] =
+ skl_plane_relative_data_rate(cstate, pstate, 0);
+ cstate->wm.skl.plane_y_data_rate[id] =
+ skl_plane_relative_data_rate(cstate, pstate, 1);
+ }
+ }
}
static void ilk_pipe_wm_get_hw_state(struct drm_crtc *crtc)
--
2.1.4
More information about the Intel-gfx
mailing list